- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Thermoplastic Elastomer, Melt-Processible Rubber
- Multibase Multi-Flex® TPE D 4210 BLK
Multibase Multi-Flex® TPE D 4210 BLK
| Category | Polymer , Thermoplastic , Elastomer, TPE , Thermoplastic Elastomer, Melt-Processible Rubber |
| Manufacturer | Multibase |
| Trade Name | Multi-Flex® TPE |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Multibase Multi-Flex® TPE D 4210 BLK.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
The burn rate is 1 in/min (25 mm/min) based on ASTM FM VSS 302. Multi-Flex TPE contains Kraton™ G.Data provided by Multibase.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.87 g/cc | 0.0676 lb/in³ | ASTM D792 |
| Linear Mold Shrinkage | 0.013 cm/cm | 0.013 in/in | ASTM D955 |
| Melt Flow | 8.0 - 15 g/10 min | 8.0 - 15 g/10 min | (Condition L) ASTM D-1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 38 | 38 | 10 sec; ASTM D-2240 |
| Tensile Strength, Ultimate | >= 4.50 MPa | >= 653 psi | ASTM D412 |
| Elongation at Break | >= 190 % | >= 190 % | ASTM D412 |
| Flexural Modulus | 0.241 GPa | 35.0 ksi | method 1, Proc.B; ASTM D-790 |
| Tear Strength | >= 27.2 kN/m | >= 155 pli | ASTM D624 |
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved