Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

DuPont Teijin Films Mylar® TL Polyester Film

Category Polymer , Film , Thermoplastic , Polyester, TP , Polyester Film
Manufacturer DuPont Teijin Films (DTF)
Trade Name Mylar®
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF DuPont Teijin Films Mylar® TL Polyester Film.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Mylar® Type TL film is a film specified for card protection engineered to provide an identical shrinkage between MD/TD and also possessing good properties of resistance to moisture, oils and chemicals.General Product Info: Mylar® Type TL film has balanced tensile properties, high clarity, and resistance to moisture, oils and chemicals, particularly whose identical MD/TD shrinkages make it well suited for protective applications and resulting in a flat and artistic product after processing while keeping clarity of the original and no deformation as well.Typical Applications: Mylar® Type TL film has been widely used in the following: (1) card protection; (2) photo protection; (3) document jackets and office supplies.Information provided by DuPont.
Physical Properties Metric English Comments
Density 1.39 g/cc
0.0502 lb/in³
Typical Mylar®; ASTM D1505
Mechanical Properties Metric English Comments
Film Elongation at Break, MD 110 %
110 %
ASTM D882A
Tensile Modulus 3.50 GPa
507 ksi
ASTM D882A
Film Tensile Strength at Break, MD 152 MPa
22000 psi
ASTM D882A
Thermal Properties Metric English Comments
Specific Heat Capacity 1.17 J/g-°C
0.280 BTU/lb-°F
Typical Mylar®
Melting Point 254 °C
489 °F
Typical Mylar® via DSC
Shrinkage, MD 2.0 %

@Temperature 150 °C,
Time 1800 sec
2.0 %

@Temperature 302 °F,
Time 0.500 hour
Unrestrained
Shrinkage, TD 2.0 %

@Temperature 150 °C,
Time 1800 sec
2.0 %

@Temperature 302 °F,
Time 0.500 hour
Unrestrained
Optical Properties Metric English Comments
Optical Density 2.5

@Thickness 0.0109 - 0.0122 mm
2.5

@Thickness 0.000430 - 0.000480 in
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved