Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Density = 1.39 g/cc Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Physical Properties Metric English Comments
Density 1.39 g/cc
0.0502 lb/in³
ISO data
BASF Capron® HPN 9233G 33% Glass-Filled Nylon 6 (Dry)  (discontinued **)
Capron HPN 9233G is a 33% glass reinforced polyamide 6 injection molding compound combining exceptional strength, stiffness and high temperature performance with excellent surface aesthetics. It is..
Density 1.39 g/cc
0.0502 lb/in³
ASTM D792
PolyOne Lubri-Tech™ PS-000/15T-2S Polyester (PBT) - 15% PTFE Lubricated - 2% Silicone Lubricated  (discontinue
Data provided by PolyOne.
Density >= 1.39 g/cc
>= 0.0502 lb/in³
WI No. 300 test
Invista 1101 PET Copolymer Packaging Resin  (discontinued **)
Carboxyl end groups:
Density >= 1.39 g/cc
>= 0.0502 lb/in³
Pycnometer test
Invista 2201U Copolymer Packaging Resin  (discontinued **)
Carboxyl end groups:
Density >= 1.39 g/cc
>= 0.0502 lb/in³
C-2011
I. Stern IS-7985 Polyethylene Terephthalate Resin
Product Description: IS-7985 is a natural polyethylene terephthalate (PET) resin. This resin is produced by continuous melt phase polymerization followed by solid phase polymerization.Certificatio..
Density 1.39 - 1.51 g/cc
0.0502 - 0.0546 lb/in³
Apparent
Gouda Vuurvast FI 45-15 Insulating Refractory Brick
This data represents average values, obtained from samples that were cut from standard bricks.Information provided by Gouda Vuurvast.
Density >= 1.39 g/cc
>= 0.0502 lb/in³
Pycnometer
Indorama Auriga Polymers Invistaâ„¢ Polyclearâ„¢ Crystalâ„¢ 3302 PET Resin
Description: Polyclearâ„¢ Crystalâ„¢ PET 3302 is a copolymer packaging resin with a nominal intrinsic viscosity of 0.79 dl/g. Polyclearâ„¢ Crystalâ„¢ PET 3302 is designed to have slow re..
Density 1.39 g/cc
0.0502 lb/in³
ASTM D792
SABIC Innovative Plastics LNP STAT-KON DSL229 PC (Asia Pacific)
LNP* Stat-kon* DSL229 is a compound based on Polycarbonate resin containing PTFE, Stainless Steel. Added features of this material include: Electrically Conductive, Internally Lubricated.
Density 1.39 g/cc
0.0502 lb/in³
ISO 1183
SABIC Innovative Plastics Valox® VX5022 PBT (Europe-Africa-Middle East)
VALOX VX5022 is a 20% glass fibre reinforced PBT+PC blend with low warpage characteristics. This grade is 5021 with reduced warpage.
Density 1.39 g/cc
0.0502 lb/in³
ASTM D792
SABIC Innovative Plastics LNP STAT-LOY AX06484 ABS
LNP* STAT-LOY* AX06484 is a compound based on ABS resin containing Talc. Added feature of this grade is: Antistatic, Extrudeable.
Density 1.39 g/cc
0.0502 lb/in³
ISO 1183
SABIC Innovative Plastics LNP THERMOCOMP LF003 PEEK (Asia Pacific)
LNP* Thermocomp* LF003 is a compound based on Polyetheretherketone resin containing Glass Fiber.
Density 1.39 g/cc
0.0502 lb/in³
ASTM D792
PlastxWorld CEVIAN® B5722 10% GF PBT/ABS Alloy
Glass fiber reinforced, heat resistant and flame retarded PBT/ABS alloy.Information provided by PlastxWorld Inc.
Density 1.39 g/cc
0.0502 lb/in³
ISO 1183
Tisan TISLAMID® 66 15% Mineral Filled Flame Retardant (V0). Heat Stabilized Nylon 66
TISLAMID has a wide area of application in electric/electronic, automotive, durable goods and telecommunications industries. It demonstrates characteristics such as Excellent chemical resistanceElec..
Density 1.39 g/cc
0.0502 lb/in³
After firing to 540°C
Zircar Ceramics ZIRALCAST 95 Alumina Refractory Castable
Hydraulically setting castable refractory containing high purity fused alumina "bubbles". This low density castable can be used like concrete and produces ceramic bodies useful in a range of applica..
Density 1.39 g/cc
0.0502 lb/in³
ISO 1183
DuPont Performance Polymers Delrin® 500T BK602 Acetal (POM)  (Unverified Data**)
Toughened Medium Viscosity Acetal Homopolymer Delrin 500T BK602 is a toughened medium viscosity acetal homopolymer resin with impact resistance similar to Delrin 100. It can be used in parts requiri..
Density 1.39 g/cc
0.0502 lb/in³
Typical Mylar®; ASTM D1505
DuPont Teijin Films Mylar® EC Polyester Film, 400 Gauge
Mylar® EC films are electrical grade films designed for use in applications where improved dimensional stability is required. In addition to lower levels of shrinkage, Mylar® EC films offer outsta..
Density 1.39 g/cc
0.0502 lb/in³
Typical Mylar®; ASTM D1505
DuPont Teijin Films Mylar® EL Polyester Film, 48 Gauge
Mylar® EL films, typically 48 through 500 gauge are strong, tough, general -purpose films for electrical/electronic uses. Heavier gauges of Mylar® EL films are similar to Mylar® MO films. Availab..
Density 1.39 g/cc
0.0502 lb/in³
Typical Mylar®; ASTM D1505
DuPont Teijin Films Mylar® LJP Polyester Film, 275 Gauge
Mylar® LJP is an industrial grade very clear film that is available with adhesion promoting coatings and slip coatings. For higher quality end-uses (especially for surface requirements) consider us..
Density 1.39 g/cc
0.0502 lb/in³
Typical Mylar®; ASTM D1505
DuPont Teijin Films Mylar® M577 Polyester Film, 48 Gauge
Mylar® Type M577 is a tough, transparent film. A rough surface provides ease of handling, good adhesion, and processability.General Product Info: Mylar® Type M577 film has balanced tensile propert..
Density 1.39 g/cc
0.0502 lb/in³
Typical Mylar®; ASTM D1505
DuPont Teijin Films Mylar® RB42AF Polyester Film, 100 Gauge
Product Description: Mylar® RB42AF is a biaxially oriented polyester (OPET) film with an ethylene vinyl acetate (EVA) heat seal layer and polyvinylidene chloride (PVdC) layer on the opposite side. ..
Density 1.39 g/cc
0.0502 lb/in³
Typical Mylar®; ASTM D1505
DuPont Teijin Films Mylar® RSX Polyester Film, 400 Gauge
Mylar® RSX films are slightly hazy, tough, general-purpose films. They have a rough surface to provide ease of handling, good adhesion, and processability. They are used for a broad range of indust..
Density 1.39 g/cc
0.0502 lb/in³
Typical Mylar®; ASTM D1505
DuPont Teijin Films Mylar® WRL63 Polyester Film, 200 Gauge
Mylar® WRL63 is a biaxially oriented polyester (OPET) film with a modified ethylene acrylate heat seal layer. It provides peelable seal over a broad temperature range to a number of bottles or cont..
Density 1.39 g/cc
0.0502 lb/in³
ASTM D1505
DuPont Teijin Films Mylar® A Polyester Film, 300 Gauge
Mylar® A films are tough, general purpose films that are transparent in 48 through 92 gauge and translucent in heavier gauges. They have a rough surface to provide ease of handling, good adhesion, ..
Density 1.39 g/cc
0.0502 lb/in³
Typical Mylar®; ASTM D1505
DuPont Teijin Films Mylar® RSX Polyester Film, 200 Gauge
Mylar® RSX films are slightly hazy, tough, general-purpose films. They have a rough surface to provide ease of handling, good adhesion, and processability. They are used for a broad range of indust..
Density 1.39 g/cc
0.0502 lb/in³
Typical Mylar®; ASTM D1505
DuPont Teijin Films Mylar® WC Polyester Film, 200 Gauge
Mylar® WC films are general-purpose electrical grade films, similar to Mylar® EL. These clear to hazy films are tough and durable as a core wrap. They offer good dielectrics and good handling char..
Density 1.39 g/cc
0.0502 lb/in³
Arkema Group Rilsan® AZM 43 G9 T6LD Nylon 12, 43% Glass Fiber Filled (Dry)
Designation ISO 1874-PA12,MHLS,16-080,(G+C)(F+D)(43+05)Rigid grade with glass fiber (43%) and graphite filler for injection molding. Available color: steel black gray. Reinforced light and heat stab..
Density 1.39 g/cc
0.0502 lb/in³
10x10x4 mm from multi-purpose test specimen (ISO 3167); ISO 1183
Celanese Hostaform® S 27063 Elastomer Modified Acetal Copolymer
Description: Hostaform® Acetal Copolymers are a high strength, crystalline, thermoplastic engineering resins whose balance of properties and ease of processability offer performance and cost advant..
Density 1.39 g/cc
0.0502 lb/in³
ISO 1183
BASF Ultrason S 2010 G4 20% Glass Filled PSU
Ultrason S 2010 G4 is a 20% glass reinforced, medium viscosity injection molding PSU grade with high rigidity and strength.
Density 1.39 g/cc
0.0502 lb/in³
Teijin Technora® Fiber
Technora® is a Teijin registered trademark.
Density 1.39 - 1.43 g/cc
0.0502 - 0.0517 lb/in³
ISO R 1183
Fainplast Compounds GA 86/R Flexible PVC, Flame Retardant Sheathing
Hydrocarbon resistant
Copyright © lookpolymers.com All Rights Reserved