Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

DuPont Teijin Films Mylar® M30 Polyester Film, 100 Gauge (25 µm), PVDC Coated  (discontinued **)

Category Polymer , Film , Thermoplastic , Polyester, TP , PVDC , Polyvinyl Dichloride (PVDC) Coated Polyester Film
Manufacturer
Trade Name
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF DuPont Teijin Films Mylar® M30 Polyester Film, 100 Gauge (25 µm), PVDC Coated  (discontinued **).pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Data provided by DuPont Packaging Polymers.A transparent polyester packaging film, solvent coated on both sides with a PVDC copolymer. The coating is heat sealable, and is an excellent moisture and oxygen barrier. Available in 50, 75, and 100 gauges. Used both in unsupported form, or as a component of a lamination, and can be run on both form-fill-seal and overwrap equipment. It is particularly well suited for the packaging of long shelf life or moisture-and oxygen-sensitive products.
Physical Properties Metric English Comments
Density 1.40 g/cc
0.0506 lb/in³
Average value for Mylar® films.
Moisture Vapor Transmission 0.200 cc-mm/m²-24hr-atm
0.508 cc-mil/100 in²-24hr-atm
ASTM E96 Procedure E
Water Vapor Transmission 8.00 g/m²/day
0.515 g/100 in²/day
ASTM E96 Procedure E
Oxygen Transmission 0.200 cc-mm/m²-24hr-atm
0.508 cc-mil/100 in²-24hr-atm
or 8 cc/m²-24hr-atm for the film. ASTM D3985
Mechanical Properties Metric English Comments
Film Elongation at Break, MD 130 %
130 %
ASTM D882
Film Elongation at Break, TD 75 %
75 %
ASTM D882
Modulus of Elasticity 3.79 GPa
550 ksi
(stiffness), ASTM D882
Tear Strength Test 500
500
Graves, g; ASTM D1004
Seal Strength 201 g/25 mm
201 g/in
Film Tensile Strength at Break, MD 179 MPa
26000 psi
ASTM D882
Film Tensile Strength at Break, TD 248 MPa
36000 psi
ASTM D882
Thermal Properties Metric English Comments
Maximum Service Temperature, Air 121 °C
250 °F
Not cleared by FDA for food temperatures above this temperature.
Shrinkage 3.0 %

@Temperature 150 °C,
Time 1800 sec
3.0 %

@Temperature 302 °F,
Time 0.500 hour
Film shrinkage in oven.
Optical Properties Metric English Comments
Haze 2.5 %
2.5 %
ASTM D1003
Gloss 180 %
180 %
20°; ASTM D2457
Transmission, Visible 90 %
90 %
transparent; thickness not quantified
Copyright © lookpolymers.com All Rights Reserved