- HOME
- POLYMER SEARCH
- Adhesive
- Dow Corning SE 4440 LP KIT
Dow Corning SE 4440 LP KIT
| Category | Polymer , Adhesive , Thermoset , Silicone |
| Manufacturer | Dow Corning |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Dow Corning SE 4440 LP KIT.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Two-part, grey, 1:1, addition cure gel, good thermal conductivity, low viscosity.Information provided by Dow Corning
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 2.01 g/cc @Temperature 25.0 °C |
2.01 g/cc @Temperature 77.0 °F |
|
| Viscosity | 3600 cP | 3600 cP | dynamic |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Penetration P(60), 1/10 mm | 58 | 58 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Thermal Conductivity | 0.830 W/m-K | 5.76 BTU-in/hr-ft²-°F | |
| Maximum Service Temperature, Air | 150 °C | 302 °F | |
| Minimum Service Temperature, Air | -45.0 °C | -49.0 °F |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+15 ohm-cm | 1.00e+15 ohm-cm | |
| Dielectric Constant | 6.2 @Frequency 1.00e+6 Hz |
6.2 @Frequency 1.00e+6 Hz |
|
| Dielectric Strength | 13.0 kV/mm | 330 kV/in |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Cure Time | 30.0 min @Temperature 120 °C |
0.500 hour @Temperature 248 °F |
|
| Shelf Life | 6.00 Month | 6.00 Month |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Color | grey | |
| Hydrophobic | yes | |
| Self Leveling | yes | |
| Water Resistant | yes | |
| Working Time (min) | 1440 |
Users viewing this material also viewed the following:
- Nanocyl PLASTICYL™ PP2001 Polypropylene with 2 wt% Multi-Wall Carbon Nanotubes
- TSE Industries Millathane® HT High Temperature-Resistant Millable Polyester Polyurethane with 30 PHR N550 (FEF) Filler
- Mitsubishi Xantar® C CF 407 Polycarbonate/ABS Blend
- Special Metals UDIMET® alloy 720 Nickel Base Alloy
- Techmer ES Electrafil® J-50/CF/10/TF/15 Polycarbonate, 10% Carbon Fiber Reinforced, 15% PTFE
- Formosa Plastics Formolene® 2520A Injection Molding Polypropylene
- Cossa Polimeri ESTAPROP 1050 V0 HF H Flame Retardant Polypropylene
- DuPont Teijin Films Melinex® 339 Polyester Film, 700 Gauge
- 3M Scotch™ 2210 Vinyl Mastic Pads and Rolls
Copyright © lookpolymers.com All Rights Reserved