Songhan Plastic Technology Co.,Ltd.

ConocoPhillips ANDEROL® 783-1 Series Synthetic Food Grade Greases, NLGI Grade 1

Category Fluid , Lubricant , Aluminum Gellant , Organic Soap Gellant , Polyalphaolefin (PAO)
Manufacturer ConocoPhillips
Trade Name ANDEROL®
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF ConocoPhillips ANDEROL® 783-1 Series Synthetic Food Grade Greases, NLGI Grade 1.pdf
  Online Service   lookpolymers   27660005
Material Notes:
Description: ANDEROL 783 Series Greases are made from synthetic hydrocarbons (PAO) and an aluminum complex soap thickener, allowing for a wide range of operating temperatures. The 783 Series Greases meet the former H-1 approval requirements of the USDA where incidental food contact can occur. ANDEROL 783 Series Greases are recommended for use with any bearing application, including bottlers, canners, fillers, ways, conveyor systems, centralized lubrication systems and freezers. ANDEROL food grade greases are approved, recommended and field tested by many OEMs in the food processing, baking, bottling, canning, meat processing and pharmaceutical industries. ANDEROL food grade greases are listed by NSF International under “USDA Regulations, Proprietary Substances and Nonfood Compounds.” ANDEROL food grade greases also meet the certification requirements recommended by the National Lubricating Grease Institute (NLGI) and the European Lubricating Grease Institute (ELGI).Information provided by ConocoPhillips.Anderol® is a registered trademark of The Anderol Company.
Physical Properties Metric English Comments
Viscosity Measurement 127
Viscosity Index; ASTM D-2270
Saybolt Viscosity at 100°F 200 SUS
200 SUS
ASTM D-2161
Saybolt Viscosity at 210°F 49 SUS
49 SUS
ASTM D-2161
Kinematic Viscosity at 40°C (104°F) 39 cSt
39 cSt
ASTM D-445
Kinematic Viscosity at 100°C (212°F) 7.0 cSt
7.0 cSt
ASTM D-445
Mechanical Properties Metric English Comments
Four Ball Wear 0.590 mm
0.0232 in
1 hr. @ 1200 rpm, 75°C (167°F), 40 kg.; ASTM D-2266
Penetration P(60), 1/10 mm 310 - 340
310 - 340
ASTM D-217
Thermal Properties Metric English Comments
Pour Point -51.1 °C
-60.0 °F
Flash Point 204 °C
399 °F
Dropping Point 232 °C
450 °F
ASTM D-566
Descriptive Properties Value Comments
Thickener Aluminum Complex
Water Washout 6.3 %
ASTM D-1264
Copyright © All Rights Reserved