- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 6
- Nylon 6, Glass/Mineral Reinforced
- Chase Plastics CP Pryme® N340MGL (COND, 50% RH) Nylon 6 (Utility Grade), 40% Mineral/Glass Fiber Reinforced, Internally Lubricated
Chase Plastics CP Pryme® N340MGL (COND, 50% RH) Nylon 6 (Utility Grade), 40% Mineral/Glass Fiber Reinforced, Internally Lubricated
| Category | Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, Glass/Mineral Reinforced |
| Manufacturer | Chase Plastics |
| Trade Name | CP Pryme® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Chase Plastics CP Pryme® N340MGL (COND, 50% RH) Nylon 6 (Utility Grade), 40% Mineral/Glass Fiber Reinforced, Internally Lubricated.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by Chase Plastics.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.48 g/cc | 1.48 g/cc | ASTM D792 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength at Break | 52.1 MPa | 7560 psi | ASTM D638 |
| Flexural Strength | 102.6 MPa | 14880 psi | ASTM D790 |
| Flexural Modulus | 4.69 GPa | 680 ksi | ASTM D790 |
| Izod Impact, Notched | 1.60 J/cm | 3.00 ft-lb/in | ASTM D256 |
Users viewing this material also viewed the following:
- Okulen® 2000 PE-UHMW, SL
- Owens Corning Glass Fiber Reinforced Epoxy (Filament Wound), 80 wt.% glass
- Gromax BFM30-EL04B2 Nylon 6 30% Mineral Filled (Dry)
- A. Schulman POLYFORT™ FPP 1285 Glass Fiber-Reinforced Copolymer Polypropylene
- Master Bond EP34CA Low Viscosity Heat Resistant Epoxy System
- ExxonMobil Santoprene® 121-60M200 Thermoplastic Vulcanizate - UV Resistant
- 3M 8440 Silicone Rubber Cold Shrink Connector Insulators
- DSM Akulon® K-FG6 (Cond.) 30% Glass Reinforced Nylon 6 (North America) (discontinued **)
Copyright © lookpolymers.com All Rights Reserved