Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Carpenter Custom 450® Stainless Steel, Condition H1000 (Age Hardened 538°C (1000°F))

Category Metal , Ferrous Metal , Stainless Steel , T 400 Series Stainless Steel
Manufacturer Carpenter Technology Corporation (Cartech)
Trade Name
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Carpenter Custom 450® Stainless Steel, Condition H1000 (Age Hardened 538°C (1000°F)).pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Data provided by Carpenter Technology Corporation.Custom 450® stainless is a martensitic age-hardenable stainless steel which exhibits very good corrosion resistance (similar to that of Stainless Type 304) with moderate strength (similar to that of Stainless Type 410). the alloy has a yield strength somewhat greater than 100 ksi (689 MPa) in the annealed condition, but is easily fabricated. A single-step aging treatment develops higher strength with good ductility and toughness. This stainless can be machined, hot-worked, and cold-formed in the same manner as other martensitic age-hardenable stainless steels. A particular advantage is ease of welding and brazing. Custom 450 stainless is generally supplied in the annealed condition, requiring no heat treatment by the user for many applications. Because it has corrosion resistance like Type 304 stainless but three times the yield strength, it has been used in applications where Type 304 was not strong enough. On the other hand, it has also replaced Type 410 stainless directly on a strength basis where Type 410 had insufficient corrosion resistance. Mechanical properties will depend on the aging temperature selected.Custom 450® is a registered trademark of Carpenter Technology Corporation.
Physical Properties Metric English Comments
Density 7.76 g/cc
0.280 lb/in³
H900 Condition
Mechanical Properties Metric English Comments
Hardness, Brinell 360
360
Estimated from Rockwell C for 3000 kg load, 10 mm ball Brinell measurement.
Hardness, Knoop 392
392
Estimated from Rockwell C
Hardness, Rockwell C 39
39
Hardness, Vickers 376
376
Estimated from Rockwell C
Tensile Strength, Ultimate 1193 MPa
173000 psi
Tensile Strength, Yield 1165 MPa

@Strain 0.200 %
169000 psi

@Strain 0.200 %
Elongation at Break 17 %
17 %
In 4D
Reduction of Area 63 %
63 %
Modulus of Elasticity 200 GPa
29000 ksi
Notched Tensile Strength 1882 MPa
273000 psi
K<sub>t</sub> = 10
Poissons Ratio 0.29
0.29
Fatigue Strength 94.0 MPa

@# of Cycles 1.00e+7
13600 psi

@# of Cycles 1.00e+7
R.R. Moore Test, Smooth Rotating Beam
Shear Modulus 77.5 GPa
11200 ksi
Calculated
Charpy Impact 69.0 J
50.9 ft-lb
V-notch
Thermal Properties Metric English Comments
CTE, linear 10.8 µm/m-°C

@Temperature 24.0 - 93.0 °C
6.00 µin/in-°F

@Temperature 75.2 - 199 °F
H900 Condition
10.87 µm/m-°C

@Temperature 24.0 - 260 °C
6.039 µin/in-°F

@Temperature 75.2 - 500 °F
H900 Condition
11.75 µm/m-°C

@Temperature 24.0 - 593 °C
6.528 µin/in-°F

@Temperature 75.2 - 1100 °F
H900 Condition
Specific Heat Capacity 0.477 J/g-°C
0.114 BTU/lb-°F
Thermal Conductivity 15.0 W/m-K

@Temperature 23.0 °C
104 BTU-in/hr-ft²-°F

@Temperature 73.4 °F
condition H 900
18.2 W/m-K

@Temperature 200 °C
126 BTU-in/hr-ft²-°F

@Temperature 392 °F
condition H 900
24.4 W/m-K

@Temperature 500 °C
169 BTU-in/hr-ft²-°F

@Temperature 932 °F
condition H 900
Component Elements Properties Metric English Comments
Carbon, C <= 0.050 %
<= 0.050 %
min. Nb content = 8 x C content
Chromium, Cr 14 - 16 %
14 - 16 %
Copper, Cu 1.25 - 1.75 %
1.25 - 1.75 %
Iron, Fe 75 %
75 %
as remainder
Manganese, Mn <= 1.0 %
<= 1.0 %
Molybdenum, Mo 0.50 - 1.0 %
0.50 - 1.0 %
Nickel, Ni 5.0 - 7.0 %
5.0 - 7.0 %
Phosphorous, P <= 0.030 %
<= 0.030 %
Silicon, Si <= 1.0 %
<= 1.0 %
Sulfur, S <= 0.030 %
<= 0.030 %
Electrical Properties Metric English Comments
Electrical Resistivity 0.0000846 ohm-cm
0.0000846 ohm-cm
H900 Condition
Copyright © lookpolymers.com All Rights Reserved