- HOME
- POLYMER SEARCH
- Ferrous Metal
- Stainless Steel
- T 300 Series Stainless Steel
- ATI Allegheny Ludlum Stainless Steel Type 301, 3/4 Hard (UNS S30100)
ATI Allegheny Ludlum Stainless Steel Type 301, 3/4 Hard (UNS S30100)
| Category | Metal , Ferrous Metal , Stainless Steel , T 300 Series Stainless Steel |
| Manufacturer | ATI Allegheny Ludlum |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | ATI Allegheny Ludlum Stainless Steel Type 301, 3/4 Hard (UNS S30100).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Allegheny Ludlum Type 301 is a high strength grade of steel available in six conditions or tempers, its resistance to atmosphere corrosion and its bright, attractive surface make it an excellent choice for decorative structural applications.Applications include automobile molding and trim, wheel cover, conveyor belts, kitchen equipment, roof draining systems, hose clamps, springs, truck and trailer bodies, railway and subway cars. By varying the chemical composition within the limits set by the ASTM Specifications and by temper rolling, a broad range of magnetic and mechanical properties can be obtained for a variety of applications.Information provided by Allegheny Ludlum Corporation.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 8.03 g/cc | 0.290 lb/in³ |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Brinell | 342 | 342 | |
| Hardness, Rockwell C | 37 | 37 | |
| Tensile Strength, Ultimate | >= 1207 MPa | >= 175100 psi | |
| Tensile Strength, Yield | >= 931 MPa @Strain 0.200 % |
>= 135000 psi @Strain 0.200 % |
|
| Elongation at Break | >= 12 % | >= 12 % | in 2" (50 mm) |
| Modulus of Elasticity | 178 GPa | 25800 ksi | as rolled longitudinal |
| 190 GPa | 27600 ksi | as rolled transverse | |
| Compressive Yield Strength | 690 MPa | 100000 psi | longitudinal |
| 1172 MPa | 170000 psi | transverse | |
| Charpy Impact | 150 J | 111 ft-lb | |
| 150 J @Temperature -73.0 °C |
111 ft-lb @Temperature -99.4 °F |
||
| 150 J @Temperature 196 °C |
111 ft-lb @Temperature 385 °F |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 16.6 µm/m-°C @Temperature 20.0 - 100 °C |
9.22 µin/in-°F @Temperature 68.0 - 212 °F |
|
| 17.6 µm/m-°C @Temperature 20.0 - 300 °C |
9.78 µin/in-°F @Temperature 68.0 - 572 °F |
||
| 18.6 µm/m-°C @Temperature 20.0 - 500 °C |
10.3 µin/in-°F @Temperature 68.0 - 932 °F |
||
| 19.5 µm/m-°C @Temperature 20.0 - 700 °C |
10.8 µin/in-°F @Temperature 68.0 - 1290 °F |
||
| Specific Heat Capacity | 0.500 J/g-°C @Temperature 0.000 - 100 °C |
0.120 BTU/lb-°F @Temperature 32.0 - 212 °F |
|
| Thermal Conductivity | 16.3 W/m-K @Temperature 100 °C |
113 BTU-in/hr-ft²-°F @Temperature 212 °F |
|
| 21.4 W/m-K @Temperature 500 °C |
149 BTU-in/hr-ft²-°F @Temperature 932 °F |
||
| Melting Point | 1399 - 1421 °C | 2550 - 2590 °F | |
| Solidus | 1399 °C | 2550 °F | |
| Liquidus | 1421 °C | 2590 °F |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Carbon, C | <= 0.15 % | <= 0.15 % | |
| Chromium, Cr | 16 - 18 % | 16 - 18 % | |
| Iron, Fe | 75 % | 75 % | as balance |
| Manganese, Mn | <= 2.0 % | <= 2.0 % | |
| Nickel, Ni | 6.0 - 8.0 % | 6.0 - 8.0 % | |
| Nitrogen, N | <= 0.10 % | <= 0.10 % | |
| Phosphorous, P | <= 0.045 % | <= 0.045 % | |
| Silicon, Si | <= 0.75 % | <= 0.75 % | |
| Sulfur, S | <= 0.030 % | <= 0.030 % |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Electrical Resistivity | 0.0000720 ohm-cm | 0.0000720 ohm-cm | |
| Magnetic Permeability | <= 1.02 | <= 1.02 | typically < 1.02 at 200H; increases with cold work. |
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved