Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Hold Pressure = 120 MPa Product List

Processing Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Processing Properties Metric English Comments
Hold Pressure 60.0 - 120 MPa
8700 - 17400 psi
Celanese Celcon® LW90-F2 POM, Tribological  (Unverified Data**)
Celcon® LW90-F2 is an acetal copolymer formulated with a nominal 9 melt flow rate base polymer and a standard level of polytetrafluoroethylene filler (PTFE). It is designed for use in wear applicat..
Hold Pressure 60.0 - 120 MPa
8700 - 17400 psi
Celanese Celcon® M50 POM  (Unverified Data**)
Celcon® M50 is a extrusion and injection molding grade with an intermediate viscosity for good processability with higher toughness than general purpose grades.Standard extruders with a length to d..
Hold Pressure 60.0 - 120 MPa
8700 - 17400 psi
Celanese Celcon® MC270 POM, Mineral Reinforced  (Unverified Data**)
Celcon® MC270 is a mineral coupled acetal copolymer designed for applications requiring improved stiffness, lower mold shrinkage and reduced warpage while maintaining the mechanical performance cha..
Hold Pressure 60.0 - 120 MPa
8700 - 17400 psi
Celanese Celcon® UV140LG POM, UV Resistant  (Unverified Data**)
Celcon® acetal copolymer grade UV140LG is a specialty grade of acetal copolymer formulated to provide good flow with a low gloss finish and a UV stability necessary for interior automotive applicat..
Hold Pressure 60.0 - 120 MPa
8700 - 17400 psi
Celanese Hostaform® C 13031 LS POM, UV Resistant  (Unverified Data**)
POM copolymerHostaform C 13031 with UV additivesInformation provided by Celanese
Hold Pressure 60.0 - 120 MPa
8700 - 17400 psi
Celanese Hostaform® C 2521 LS POM, UV Resistant  (Unverified Data**)
Stiff-flowing grade for injection molding and extrusion, UV resistantInformation provided by Celanese
Hold Pressure 60.0 - 120 MPa
8700 - 17400 psi
Celanese Hostaform® C 27021 POM  (Unverified Data**)
Chemical abbreviation according to ISO 1043-1: POMInjection molding grade with high flowInformation provided by Celanese
Hold Pressure 60.0 - 120 MPa
8700 - 17400 psi
Celanese Hostaform® C 36021 POM  (Unverified Data**)
Hostaform® C 36021 is an unfilled acetal copolymer grade formulated for high flow while retaining a good balance of mechanical properties.High flow, unfilled, for fast cycle & thin wallsInformation..
Hold Pressure 60.0 - 120 MPa
8700 - 17400 psi
Celanese Hostaform® C 9021 G POM, Tribological  (Unverified Data**)
Chemical abbreviation according to ISO 1043-1: POMInjection molding type like C 9021, with (R) GUR (PE-UHMW) modifiedInformation provided by Celanese
Hold Pressure 60.0 - 120 MPa
8700 - 17400 psi
Celanese Hostaform® C 9021 XAP² ™ POM  (Unverified Data**)
POM copolymerLow EmissionInformation provided by Celanese
Hold Pressure 60.0 - 120 MPa
8700 - 17400 psi
Celanese Hostaform® MT8F02 POM, Medical Technology  (Unverified Data**)
Hostaform® acetal copolymer grade MT8F02 is a special grade developed for medical industry applications containing low residual monomers. Hostaform® MT8F02 is a standard flow high level polytetra..
Hold Pressure 60.0 - 120 MPa
8700 - 17400 psi
Celanese Hostaform® S 9364 XAP² ™ POM, Impact Modified  (Unverified Data**)
Hostaform® acetal copolymer grade S 9364 XAP2 ™ is highly impact modified grade for demanding applications. Hostaform® S 9364 XAP2 ™ provides a significant improvement in impact strength and fl..
Hold Pressure 60.0 - 120 MPa
8700 - 17400 psi
Celanese Hostaform® C 9021 G POM, Tribological
Chemical abbreviation according to ISO 1043-1: POMInformation provided by Celanese
Hold Pressure 60.0 - 120 MPa
8700 - 17400 psi
Celanese Hostaform® C 9021 SW XAP² ™ LS POM, Tribological
POM copolymerInformation provided by Celanese
Hold Pressure 60.0 - 120 MPa
8700 - 17400 psi
Celanese Hostaform® LW90BSX POM, Tribological
Hostaform« LW90BSX is a specialty low wear grade of acetal copolymer designed for a wide range of tribological applications, including POM/POM pairings. This grade's low wear system includes silic..
Hold Pressure 60.0 - 120 MPa
8700 - 17400 psi
Celanese Hostaform® XT 20 POM, Impact Modified
Preliminary Data SheetInformation provided by Celanese
Hold Pressure 60.0 - 120 MPa
8700 - 17400 psi
Celanese Hostaform® LX90Z XAP2 ™ POM, UV Resistant
Preliminary Data SheetDrying is required for this material to prevent poor appearance and performance of the part.Information provided by Celanese Corporation.
Hold Pressure 60.0 - 120 MPa
8700 - 17400 psi
Celanese Hostaform® S 27063 XAP² ™ POM, Impact Modified
POM copolymer, impact modifiedImpact modified, low emissionInformation provided by Celanese
Hold Pressure 60.0 - 120 MPa
8700 - 17400 psi
Celanese Hostaform® S 9364 XAP2 ™ POM, Impact Modified
Preliminary Data SheetDrying is suggested to help achieve low emission performance and to counter if material has contacted moisture through improper storage and handling.Information provided by Cel..
Hold Pressure 60.0 - 120 MPa
8700 - 17400 psi
Celanese Celcon® LW90 POM, Tribological
Celcon« LW90 is a nominal 9 melt flow rate based material specifically formulated for high speed, low wear applications against metals. LW90 conforms to applicable FDA regulations governing food co..
Hold Pressure 60.0 - 120 MPa
8700 - 17400 psi
Celanese Hostaform® C 27021 POM, Unfilled
Chemical abbreviation according to ISO 1043-1: POMInformation provided by Celanese
Hold Pressure 60.0 - 120 MPa
8700 - 17400 psi
Celanese Hostaform® C 9021 XAP² ™ POM, Unfilled
POM copolymerInformation provided by Celanese
Hold Pressure 60.0 - 120 MPa
8700 - 17400 psi
Celanese Hostaform® MT® SlideX™ 1203 POM, Medical Technology
POM copolymerInformation provided by Celanese
Hold Pressure 60.0 - 120 MPa
8700 - 17400 psi
Celanese Hostaform® C 9021 AW POM, Tribological  (Unverified Data**)
Chemical abbreviation according to ISO 1043-1: POMInjection molding type like C 9021, with special additive modifiedInformation provided by Celanese
Hold Pressure 60.0 - 120 MPa
8700 - 17400 psi
Celanese Hostaform® LM90 POM, Specialty  (Unverified Data**)
Hostaform® LM90 is a nominal 9 melt flow rate acetal copolymer which is capable of being permanently marked by a laser. Parts molded from Hostaform® LM90 can be laser marked with barcodes, identif..
Hold Pressure 60.0 - 120 MPa
8700 - 17400 psi
Celanese Hostaform® S 27063 POM, Impact Modified  (Unverified Data**)
Chemical abbreviation according to ISO 1043-1: POM-HI,Easy flowing elastomer-containing injection molding grade, moderate toughnessInformation provided by Celanese
Hold Pressure 60.0 - 120 MPa
8700 - 17400 psi
Celanese Hostaform® C 27021 LS colored POM, UV Resistant
Information provided by Celanese
Hold Pressure 60.0 - 120 MPa
8700 - 17400 psi
Celanese Hostaform® C 52021 XAP POM, Unfilled
POM copolymerInformation provided by Celanese
Hold Pressure 60.0 - 120 MPa
8700 - 17400 psi
Celanese Hostaform® CF802 10/9022 POM, Specialty
Hostaform« acetal copolymer grade CF802 10/9022 is a conductive, fuel compatible general purpose acetal copolymer. Hostaform« CF802 10/9022 has been developed to dissipate static electricity from ..
Hold Pressure 60.0 - 120 MPa
8700 - 17400 psi
Celanese Hostaform® MT® SlideX™ 2404 POM, Medical Technology
POM copolymerInformation provided by Celanese
Copyright © lookpolymers.com All Rights Reserved