Thermal Properties | Metric | English | Comments |
---|---|---|---|
CTE, linear | 7.80 µm/m-°C | 4.33 µin/in-°F | |
Poco Graphite CZR Semiconductor Grade Graphite Although it is impossible to identify differences between various grades of graphite by looking at them, each grade has a special set of characteristics and physical properties that determine their .. |
|||
CTE, linear | 7.80 µm/m-°C | 4.33 µin/in-°F | |
Poco Graphite AXM-5Q Industrial Grade Graphite POCO’s specialty graphite materials are used in a wide range of highly technical and industrial applications. Each grade has characteristics and properties that allow the user to match the ideal gr.. |
|||
CTE, linear | 7.80 µm/m-°C @Temperature 260 °C |
4.33 µin/in-°F @Temperature 500 °F |
|
Ferro EG 2018 Display Device Glass Type: Pb-B (Composite) Typical Powder Form: VEG Typical Application: Seal Ferro's display sealing glasses and dielectrics are low-temperature lead glasses suitable for hermetic sealing and .. |
|||
CTE, linear | 7.80 µm/m-°C @Temperature 20.0 °C |
4.33 µin/in-°F @Temperature 68.0 °F |
|
MarkeTech Aluminum Oxide Ceramic - Alumina 99.5% Data provided by the supplier, MarkeTech International.Because of their high temperature, chemical, electrical, and mechanical properties along with their relatively low cost and ease of manufacture.. |
|||
CTE, linear | 7.80 - 8.40 µm/m-°C @Temperature 20.0 - 100 °C |
4.33 - 4.67 µin/in-°F @Temperature 68.0 - 212 °F |
|
MarkeTech Mo70Cu Moly/Copper Heat Sink Material MoCu alloys are made by sintering molybdenum and copper together. This results in a heat sink of lower density than tungsten-based materials, low thermal expansion, and excellent thermal conductivit.. |
|||
CTE, linear | 7.80 - 8.50 µm/m-°C @Temperature 20.0 - 100 °C |
4.33 - 4.72 µin/in-°F @Temperature 68.0 - 212 °F |
|
MarkeTech W80Cu Tungsten/Copper Heat Sink Material WCu composites are made by vacuum infiltration of uniform controlled porous blocks of tungsten with molten copper. This results in a material with an interconnected Cu matrix that has high thermal c.. |
|||
CTE, linear | 7.80 µm/m-°C @Temperature 20.0 °C |
4.33 µin/in-°F @Temperature 68.0 °F |
|
GBC Grade 99 Alumina Data provided by the manufacturer, GBC Materials Corporation. |
|||
CTE, linear | 7.80 µm/m-°C @Temperature 20.0 - 300 °C |
4.33 µin/in-°F @Temperature 68.0 - 572 °F |
ISO 7991 |
Schott ILLAX® Amber Pharmaceutical Glass Amber Glass Pharmaceutical primary packaging for oralia and solid dosageInformation provided by SCHOTT AG. |
|||
CTE, linear | 7.80 µm/m-°C @Temperature 25.0 - 700 °C |
4.33 µin/in-°F @Temperature 77.0 - 1290 °F |
|
Du-Co Ceramics S-699 Alumina Du-Co Ceramics Company manufactures a variety of crushable ceramic materials for use worldwide in cartridge heaters, thermocouples, and mineral insulated cable. The crushable ceramic products are cu.. |
|||
CTE, linear | 7.80 µm/m-°C @Temperature 1000 °C |
4.33 µin/in-°F @Temperature 1830 °F |
|
Chosun Refractories SAL85BR Special High Alumina brick Information provided by Chosun Refractories via Korea Institute of Ceramic Engineering and Technology (KICET). |
|||
CTE, linear | 7.80 µm/m-°C @Temperature 1000 °C |
4.33 µin/in-°F @Temperature 1830 °F |
|
Chosun Refractories SAL99 Special High Alumina brick Information provided by Chosun Refractories via Korea Institute of Ceramic Engineering and Technology (KICET). |
|||
CTE, linear | 7.80 - 8.30 µm/m-°C @Temperature 25.0 - 800 °C |
4.33 - 4.61 µin/in-°F @Temperature 77.0 - 1470 °F |
|
China-Yixing Longly Refractories 99 Alumina Ceramic Tubes & Rods LONGLY's alumina ceramic tubes and rods (the tolerances of +/- 0.02mm could be reached by mechanical or electronic finishing or mirror surface finishing) have high hardness, wear resistance, insulat.. |
|||
CTE, linear | 7.80 µm/m-°C @Temperature 20.0 - 600 °C |
4.33 µin/in-°F @Temperature 68.0 - 1110 °F |
ASTM-C373 |
CeramTec 950 Zirconia Toughened Alumina (ZTA), Al2O3•ZrO2 950 has a combination of high strength (from zirconia) and high hardness (from the alumina phase). It has excellent wear resistance, both in sliding and abrasive conditions. This material offers a g.. |