Thermal Properties | Metric | English | Comments |
---|---|---|---|
CTE, linear | 17.8 - 18.8 µm/m-°C @Temperature 20.0 - 300 °C |
9.89 - 10.4 µin/in-°F @Temperature 68.0 - 572 °F |
|
PEAK Werkstoff DISPAL S250 Aluminum Alloy, AlSi20Fe5Ni2, Condition F Excellent properties:abrasive stabilityhigh stiffness (E-modulus)resistance even at high temperaturesgood grindabilityPEAK DISPAL materials allow the manufacturing of pistons for highest operational.. |
|||
CTE, linear | 17.8 µm/m-°C @Temperature 25.0 - 1000 °C |
9.89 µin/in-°F @Temperature 77.0 - 1830 °F |
|
Haynes HR-120® alloy, solution heat-treated Excellent strength at elevated temperatures, combined with good resistance to carburizing and sulfidizing environments. Applications include bar frame heat treating baskets, wire mesh furnace belts .. |
|||
CTE, linear | 17.8 µm/m-°C @Temperature 25.0 - 1000 °C |
9.89 µin/in-°F @Temperature 77.0 - 1830 °F |
|
Haynes HR-120® alloy, solution heat-treated aged at 1600°F for 1000 hours Excellent strength at elevated temperatures, combined with good resistance to carburizing and sulfidizing environments. Applications include bar frame heat treating baskets, wire mesh furnace belts .. |
|||
CTE, linear | 17.8 µm/m-°C @Temperature 25.0 - 1000 °C |
9.89 µin/in-°F @Temperature 77.0 - 1830 °F |
|
Haynes HR-120® alloy, solution heat-treated aged at 1800°F for 1000 hours Excellent strength at elevated temperatures, combined with good resistance to carburizing and sulfidizing environments. Applications include bar frame heat treating baskets, wire mesh furnace belts .. |
|||
CTE, linear | 17.8 µm/m-°C @Temperature 23.0 - 1000 °C |
9.89 µin/in-°F @Temperature 73.4 - 1830 °F |
|
Haynes Multimet® alloy, 12.7 mm (1/2 in.) thick plate, 1185°C heat treatment, water quenched Recommended for use in applications involving high stress at temperatures up to 816°C (1500°F), and moderate stresses up to 1093°C (2000°F). Excellent oxidation resistance, good ductilit.. |
|||
CTE, linear | 17.8 µm/m-°C @Temperature 23.0 - 1000 °C |
9.89 µin/in-°F @Temperature 73.4 - 1830 °F |
|
Haynes Multimet® alloy, 25.4-50.8 mm forged bar, 1185°C heat treatment, water quenched Recommended for use in applications involving high stress at temperatures up to 816°C (1500°F), and moderate stresses up to 1093°C (2000°F). Excellent oxidation resistance, good ductilit.. |
|||
CTE, linear | 17.8 µm/m-°C @Temperature 23.0 - 900 °C |
9.89 µin/in-°F @Temperature 73.4 - 1650 °F |
|
Haynes Multimet® alloy, 25.4-50.8 mm forged bar, 1185°C heat treatment, water quenched Recommended for use in applications involving high stress at temperatures up to 816°C (1500°F), and moderate stresses up to 1093°C (2000°F). Excellent oxidation resistance, good ductilit.. |
|||
CTE, linear | 17.8 µm/m-°C @Temperature 23.0 - 900 °C |
9.89 µin/in-°F @Temperature 73.4 - 1650 °F |
|
Haynes Multimet® alloy, 6.15 mm hot-rolled bar, 1185°C heat treatment, rapid air cooled Recommended for use in applications involving high stress at temperatures up to 816°C (1500°F), and moderate stresses up to 1093°C (2000°F). Excellent oxidation resistance, good ductilit.. |
|||
CTE, linear | 17.8 µm/m-°C @Temperature 23.0 - 1000 °C |
9.89 µin/in-°F @Temperature 73.4 - 1830 °F |
|
Haynes Multimet® alloy, 6.15 mm hot-rolled bar, 15% cold reduction Recommended for use in applications involving high stress at temperatures up to 816°C (1500°F), and moderate stresses up to 1093°C (2000°F). Excellent oxidation resistance, good ductilit.. |
|||
CTE, linear | 17.8 µm/m-°C @Temperature 23.0 - 900 °C |
9.89 µin/in-°F @Temperature 73.4 - 1650 °F |
|
Haynes Multimet® alloy, 6.15 mm hot-rolled bar, 15% cold reduction Recommended for use in applications involving high stress at temperatures up to 816°C (1500°F), and moderate stresses up to 1093°C (2000°F). Excellent oxidation resistance, good ductilit.. |
|||
CTE, linear | 17.8 µm/m-°C @Temperature 23.0 - 1000 °C |
9.89 µin/in-°F @Temperature 73.4 - 1830 °F |
|
Haynes Multimet® alloy, 6.15 mm hot-rolled bar, 30% cold reduction Recommended for use in applications involving high stress at temperatures up to 816°C (1500°F), and moderate stresses up to 1093°C (2000°F). Excellent oxidation resistance, good ductilit.. |
|||
CTE, linear | 17.8 µm/m-°C @Temperature 23.0 - 1000 °C |
9.89 µin/in-°F @Temperature 73.4 - 1830 °F |
|
Haynes Multimet® alloy, 6.15 mm hot-rolled bar, 40% cold reduction Recommended for use in applications involving high stress at temperatures up to 816°C (1500°F), and moderate stresses up to 1093°C (2000°F). Excellent oxidation resistance, good ductilit.. |
|||
CTE, linear | 17.8 µm/m-°C @Temperature 23.0 - 1000 °C |
9.89 µin/in-°F @Temperature 73.4 - 1830 °F |
|
Haynes Multimet® alloy, GTAW, 3.2 mm sheet Recommended for use in applications involving high stress at temperatures up to 816°C (1500°F), and moderate stresses up to 1093°C (2000°F). Excellent oxidation resistance, good ductilit.. |
|||
CTE, linear | 17.8 µm/m-°C @Temperature 23.0 - 1000 °C |
9.89 µin/in-°F @Temperature 73.4 - 1830 °F |
|
Haynes Multimet® alloy, GTAW, 6.35 mm plate Recommended for use in applications involving high stress at temperatures up to 816°C (1500°F), and moderate stresses up to 1093°C (2000°F). Excellent oxidation resistance, good ductilit.. |
|||
CTE, linear | 17.8 µm/m-°C @Temperature 23.0 - 900 °C |
9.89 µin/in-°F @Temperature 73.4 - 1650 °F |
|
Haynes Multimet® alloy, sand cast, 1171°C heat treatment for 2 hours Recommended for use in applications involving high stress at temperatures up to 816°C (1500°F), and moderate stresses up to 1093°C (2000°F). Excellent oxidation resistance, good ductilit.. |
|||
CTE, linear | 17.8 µm/m-°C @Temperature 23.0 - 1000 °C |
9.89 µin/in-°F @Temperature 73.4 - 1830 °F |
|
Haynes Multimet® alloy, sand cast, 1171°C heat treatment for 2 hours Recommended for use in applications involving high stress at temperatures up to 816°C (1500°F), and moderate stresses up to 1093°C (2000°F). Excellent oxidation resistance, good ductilit.. |
|||
CTE, linear | 17.8 µm/m-°C @Temperature 23.0 - 1000 °C |
9.89 µin/in-°F @Temperature 73.4 - 1830 °F |
|
Haynes Multimet® alloy, SMAW, 12.7 mm plate Recommended for use in applications involving high stress at temperatures up to 816°C (1500°F), and moderate stresses up to 1093°C (2000°F). Excellent oxidation resistance, good ductilit.. |
|||
CTE, linear | 17.8 µm/m-°C @Temperature 23.0 - 900 °C |
9.89 µin/in-°F @Temperature 73.4 - 1650 °F |
|
Haynes Multimet® alloy, SMAW, 12.7 mm plate Recommended for use in applications involving high stress at temperatures up to 816°C (1500°F), and moderate stresses up to 1093°C (2000°F). Excellent oxidation resistance, good ductilit.. |
|||
CTE, linear | 17.8 µm/m-°C @Temperature 23.0 - 1000 °C |
9.89 µin/in-°F @Temperature 73.4 - 1830 °F |
|
Haynes Multimet® alloy, 6.15 mm hot-rolled bar, 35% cold reduction Recommended for use in applications involving high stress at temperatures up to 816°C (1500°F), and moderate stresses up to 1093°C (2000°F). Excellent oxidation resistance, good ductilit.. |
|||
CTE, linear | 17.8 µm/m-°C @Temperature 23.0 - 900 °C |
9.89 µin/in-°F @Temperature 73.4 - 1650 °F |
|
Haynes Multimet® alloy, 6.15 mm hot-rolled bar, 35% cold reduction Recommended for use in applications involving high stress at temperatures up to 816°C (1500°F), and moderate stresses up to 1093°C (2000°F). Excellent oxidation resistance, good ductilit.. |
|||
CTE, linear | 17.8 µm/m-°C @Temperature 23.0 - 900 °C |
9.89 µin/in-°F @Temperature 73.4 - 1650 °F |
|
Haynes Multimet® alloy, SMAW, 3.2 mm sheet Recommended for use in applications involving high stress at temperatures up to 816°C (1500°F), and moderate stresses up to 1093°C (2000°F). Excellent oxidation resistance, good ductilit.. |
|||
CTE, linear | 17.8 µm/m-°C @Temperature 23.0 - 1000 °C |
9.89 µin/in-°F @Temperature 73.4 - 1830 °F |
|
Haynes Multimet® alloy, SMAW, 3.2 mm sheet Recommended for use in applications involving high stress at temperatures up to 816°C (1500°F), and moderate stresses up to 1093°C (2000°F). Excellent oxidation resistance, good ductilit.. |
|||
CTE, linear | 17.8 µm/m-°C @Temperature 23.0 - 1000 °C |
9.89 µin/in-°F @Temperature 73.4 - 1830 °F |
|
Haynes Multimet® alloy, SMAW, 9.5 mm plate Recommended for use in applications involving high stress at temperatures up to 816°C (1500°F), and moderate stresses up to 1093°C (2000°F). Excellent oxidation resistance, good ductilit.. |
|||
CTE, linear | 17.8 µm/m-°C @Temperature 0.000 - 316 °C |
9.90 µin/in-°F @Temperature 32.0 - 600 °F |
|
Crucible Steel 303 SE Chromium-Nickel Steel Crucible 303 SE is a non-hardenable austenitic chromium-nickel steel to which selenium has been added to improve machinability and non-galling characteristics. This grade is non-magnetic in the anne.. |
|||
CTE, linear | 17.8 µm/m-°C @Temperature 21.0 - 427 °C |
9.89 µin/in-°F @Temperature 69.8 - 801 °F |
|
Crucible Steel XM-19 Stainless Steel Crucible XM-19 Stainless is a nitrogen strengthened, low carbon, austenitic, stainless steel that provides good corrosion resistance in combination with high strength. The alloy has better corrosio.. |
|||
CTE, linear | 17.8 µm/m-°C @Temperature 0.000 - 316 °C |
9.90 µin/in-°F @Temperature 32.0 - 600 °F |
|
Crucible Steel 304L Chromium-Nickel Steel Crucible 304L is a non-hardenable, low carbon austenitic chromium-nickel steel designed for special applications. It is particularly suitable for applications requiring welding operations where it i.. |
|||
CTE, linear | 17.8 µm/m-°C @Temperature 23.0 - 1000 °C |
9.89 µin/in-°F @Temperature 73.4 - 1830 °F |
|
Haynes Multimet® alloy, 12.7-50.8 mm hot-rolled bar, 1185°C heat treatment, water quenched Recommended for use in applications involving high stress at temperatures up to 816°C (1500°F), and moderate stresses up to 1093°C (2000°F). Excellent oxidation resistance, good ductility, and i.. |
|||
CTE, linear | 17.8 µm/m-°C @Temperature 23.0 - 900 °C |
9.89 µin/in-°F @Temperature 73.4 - 1650 °F |
|
Haynes Multimet® alloy, 533.4 by 82.55 mm forging, stress relieved at 649°C (1200°F), air cooled Recommended for use in applications involving high stress at temperatures up to 816°C (1500°F), and moderate stresses up to 1093°C (2000°F). Excellent oxidation resistance, good ductility, and i.. |
|||
CTE, linear | 17.8 µm/m-°C @Temperature 23.0 - 1000 °C |
9.89 µin/in-°F @Temperature 73.4 - 1830 °F |
|
Haynes Multimet® alloy, 6.15 mm hot-rolled bar, 25% cold reduction Recommended for use in applications involving high stress at temperatures up to 816°C (1500°F), and moderate stresses up to 1093°C (2000°F). Excellent oxidation resistance, good ductility, and i.. |
|||
CTE, linear | 17.8 µm/m-°C @Temperature 23.0 - 900 °C |
9.89 µin/in-°F @Temperature 73.4 - 1650 °F |
|
Haynes Multimet® alloy, 6.15 mm hot-rolled bar, 25% cold reduction Recommended for use in applications involving high stress at temperatures up to 816°C (1500°F), and moderate stresses up to 1093°C (2000°F). Excellent oxidation resistance, good ductility, and i.. |