Thermal Properties | Metric | English | Comments |
---|---|---|---|
Melting Point | 261 °C | 502 °F | ISO 3146 |
PolyOne Bergamid™ A70 G15 HW TM-Z Polyamide 66 (Nylon 66) Information provided by PolyOne |
|||
Melting Point | 261 °C | 502 °F | ISO 3146 |
PolyOne Bergamid™ A70 G25 H U-SO Polyamide 66 (Nylon 66) Information provided by PolyOne |
|||
Melting Point | 261 °C | 502 °F | ISO 3146 |
PolyOne Bergamid™ A70 GK30 black 13539126 Polyamide 66 (Nylon 66) Information provided by PolyOne |
|||
Melting Point | 261 °C | 502 °F | ISO 3146 |
PolyOne Bergamid™ A70 GK30 H Polyamide 66 (Nylon 66) Information provided by PolyOne |
|||
Melting Point | 261 °C | 502 °F | ISO 3146 |
PolyOne Bergamid™ A700 blue VN4817CF Polyamide 66 (Nylon 66) Information provided by PolyOne |
|||
Melting Point | 261 °C | 502 °F | ISO 3146 |
PolyOne Bergamid™ A700 G15 HW UF Polyamide 66 (Nylon 66) These products contain flame retardants which are activated by longer residence times in the cylinder and then can decompose. At interruption of the moulding cycle (approx. >5 min) it is recommended.. |
|||
Melting Point | 261 °C | 502 °F | ISO 3146 |
PolyOne Bergamid™ A700 G20 UF Polyamide 66 (Nylon 66) Information provided by PolyOne |
|||
Melting Point | 261 °C | 502 °F | ISO 3146 |
PolyOne Bergamid™ A700 G25 HW UF Polyamide 66 (Nylon 66) Information provided by PolyOne |
|||
Melting Point | 261 °C | 502 °F | ISO 3146 |
PolyOne Bergamid™ A700 G25 U-SO Polyamide 66 (Nylon 66) Information provided by PolyOne |
|||
Melting Point | 261 °C | 502 °F | ISO 3146 |
PolyOne Bergamid™ A700 Polyamide 66 (Nylon 66) Information provided by PolyOne |
|||
Melting Point | 261 °C | 502 °F | ISO 3146 |
PolyOne Bergamid™ A700 TM-YF Polyamide 66 (Nylon 66) Information provided by PolyOne |
|||
Melting Point | 261 °C | 502 °F | DAM; 10°C/min; ISO 11357-1/-3 |
DuPont Performance Polymers Zytel® FE270050 BK099 Nylon 66
(Unverified Data**) Zytel® FE270050 BK099 is a 30% glass reinforced, polyamide 66 resin for gas and water assisted injection molding.Information provided by DuPont |
|||
Melting Point | 261 °C | 502 °F | 10°C/min; ISO 11357-1/-3 |
Lanxess Durethan® AKV 50 H2.0 901510 Nylon 66, 50% Glass Fiber PA 66, injection molding grade, 50% glass fibers, good heat-ageing resistance |
|||
Melting Point | 261 °C | 502 °F | 10 °C/min; ISO 11357-1,-3 |
Lanxess Durethan® AC 30 DUS027 000000 Nylon 66 PA 66, non-reinforced, injection molded, impact modifiedInformation provided by LANXESS. |
|||
Melting Point | 261 °C | 502 °F | ASTM D3418 |
Samyang Tramid® 910 PA66/PA6 Strong with excellent thermal resistance. Abrasion resistance, chemical resistance and oil resistance are excellent.Applications:Automotive knob types, door handles and mirror housingsConnectorsCab.. |
|||
Melting Point | <= 261 °C | <= 502 °F | Peak Melting Point; ExxonMobil method |
ExxonMobil HDPE HD 9830.02 High Density Polyethylene Resin Product Description: HD 9830.02 is a blow molding grade high density polyethylene copolymer with a bimodal molecular weight distribution. It provides a very good balance of stress crack resistance, .. |
|||
Melting Point | <= 261 °C | <= 502 °F | Peak Melting Point; ExxonMobil method |
ExxonMobil LLDPE LL 8450.31 Linear Low Density Polyethylene Resin Product Description: LL 8450 is a linear low density hexene copolymer designed to offer excellent stiffness, processability, whiteness and ESCR. They are ideally suited for applications that require.. |
|||
Melting Point | <= 261 °C | <= 502 °F | Peak Melting Point; ExxonMobil method |
ExxonMobil LLDPE LL 8460.29 Linear Low Density Polyethylene Resin Product Description: LL 8460 is a linear low density hexene copolymer designed to offer excellent ESCR and toughness. This resin is ideally suited for applications that require the optimum balance o.. |
|||
Melting Point | <= 261 °C | <= 502 °F | Peak Melting Point; ExxonMobil method |
ExxonMobil LLDPE LLP 8450.31 Linear Low Density Polyethylene Resin Product Description: LL 8450 is a linear low density hexene copolymer designed to offer excellent stiffness, processability, whiteness and ESCR. They are ideally suited for applications that require.. |
|||
Melting Point | <= 261 °C | <= 502 °F | Peak Melting Point; ExxonMobil method |
ExxonMobil LLDPE LLP 8460.29 Linear Low Density Polyethylene Resin Product Description: LL 8460 is a linear low density hexene copolymer designed to offer excellent ESCR and toughness. This resin is ideally suited for applications that require the optimum balance o.. |
|||
Melting Point | 261 °C | 502 °F | DAM; 10°C/min; ISO 11357-1/-3 |
DuPont Performance Polymers Zytel® FR50 NC010A Nylon 66
(Unverified Data**) 25% Glass Reinforced Flame Retardant Polyamide 66 Zytel FR50 NC010A is a 25% glass fiber reinforced flame retardant polyamide 66 resin for injection molding.Information provided by DuPont Performanc.. |
|||
Melting Point | 261 °C | 502 °F | ASTM D789 |
Asia International Enterprise (Hong Kong) 60T4 Nylon 66, 20% Filled Information provided by Asia International Enterprise (Hong Kong) Ltd. |
|||
Melting Point | 261 °C | 502 °F | ASTM D1525 |
Ascend Performance Materials VYDYNE® 45 Nylon, Impact Modified, Weather Stable Typical property data. VYDYNE is a registered trademark of Solutia Inc. |
|||
Melting Point | 261 °C | 502 °F | ASTM D789 |
Asia International Enterprise (Hong Kong) 60G2-13GF Nylon 66, 13% Filled Information provided by Asia International Enterprise (Hong Kong) Ltd. |
|||
Melting Point | 261 °C | 502 °F | ASTM D789 |
Asia International Enterprise (Hong Kong) 60G7F Nylon 66, 35% Filled Information provided by Asia International Enterprise (Hong Kong) Ltd. |
|||
Melting Point | 261 °C | 502 °F | ASTM D789 |
Asia International Enterprise (Hong Kong) 60T6 Nylon 66, 30% Filled Information provided by Asia International Enterprise (Hong Kong) Ltd. |
|||
Melting Point | 261 °C | 502 °F | ASTM D789 |
Asia International Enterprise (Hong Kong) 6010FEN Nylon 66 Information provided by Asia International Enterprise (Hong Kong) Ltd. |
|||
Melting Point | 261 °C | 502 °F | ASTM D789 |
Asia International Enterprise (Hong Kong) 60G6-33GF Nylon 66, 33% Filled Information provided by Asia International Enterprise (Hong Kong) Ltd. |