- HOME
- POLYMER SEARCH
- Polymer Property : Melting Point = 167 °C
Polymer Property : Melting Point = 167 °C Product List
Thermal PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 167 °C | 333 °F | 10°C/min; ISO 11357-1,-2,-3 |
| Celanese Celcon® M90AW POM, Tribological
(Unverified Data**) Celcon® M90AW is a low wear grade designed for gears and other low wear applications, especially where reducing noise and wear in low load-high velocity applications. Celcon® M90AW is an option .. |
|||
| Melting Point | 167 °C | 333 °F | 10°C/min; ISO 11357-1,-2,-3 |
| Celanese Celcon® UV270Z POM, UV Resistant
(Unverified Data**) Celcon® UV270Z is a nominal 27 melt flow rate acetal copolymer which has been specially stabilized to prevent discoloration and deterioration of mechanical properties from ultraviolet light exposur.. |
|||
| Melting Point | 167 °C | 333 °F | 10°C/min; ISO 11357-1,-2,-3 |
| Celanese Hostaform® C 9021 LS 10/1570 POM, UV Resistant
(Unverified Data**) Chemical abbreviation according to ISO 1043-1: POMGeneral purpose injection molding grade, UV-stabilized with UV stabilzers and carbon blackInformation provided by Celanese |
|||
| Melting Point | 167 °C | 333 °F | 10°C/min; ISO 11357-1,-2,-3 |
| Celanese Hostaform® LG450UV-D POM, UV Resistant
(Unverified Data**) Hostaform® acetal copolymer grade LG450UV-D is a specialty grade of acetal copolymer formulated to provide high flow with a reduced gloss finish and a UV stability necessary for interior automotive.. |
|||
| Melting Point | 167 °C | 333 °F | 10°C/min; ISO 11357-1,-2,-3 |
| Celanese Hostaform® LM25 POM, Specialty
(Unverified Data**) Hostaform® LM25 is a 2.5 melt flow acetal copolymer which is capable of being permanently marked by a laser. Parts molded from Hostaform® LM25 can be lasermarked with bar-codes, identification num.. |
|||
| Melting Point | 167 °C | 333 °F | 10°C/min; ISO 11357-1,-2,-3 |
| Celanese Hostaform® M90LF POM
(Unverified Data**) Hostaform® acetal copolymer grade M90LF is a medium viscosity polymer providing optimum performance in general purpose injection molding and extrusion of thin walled tubing and thin gauge film.Stan.. |
|||
| Melting Point | 167 °C | 333 °F | 10°C/min.; ISO 3146 |
| Azoty Tarnow™ TARNOFORM 300 GF5 POM 26% glass fiber reinforced injection molding grade, suitable for applications where increased strength and stiffness is required.Information provided by Zakłady Azotowe w Tarnowie-Moscicach S.A... |
|||
| Melting Point | 167 °C | 333 °F | 10°C/min.; ISO 3146 |
| Azoty Tarnow™ TARNOFORM 300 GF6 BK POM 30% glass fiber reinforced injection molding grade, suitable for applications where increased strength and stiffness is required.Information provided by Zakłady Azotowe w Tarnowie-Moscicach S.A... |
|||
| Melting Point | 167 °C | 333 °F | 10°C/min.; ISO 3146 |
| Azoty Tarnow™ TARNOFORM 300 GF6 POM 30% glass fiber reinforced injection molding grade, suitable for applications where increased strength and stiffness is required.Information provided by Zakłady Azotowe w Tarnowie-Moscicach S.A... |
|||
| Melting Point | 167 °C | 333 °F | 10°C/min.; ISO 3146 |
| Azoty Tarnow™ TARNOFORM 300 GF7 POM 35% glass fiber reinforced injection molding grade, suitable for applications where increased strength and stiffness is required.Information provided by Zakłady Azotowe w Tarnowie-Moscicach S.A... |
|||
| Melting Point | 167 °C | 333 °F | 10°C/min.; ISO 3146 |
| Azoty Tarnow™ TARNOFORM 300 HI2 POM Rubber modified grade with very high impact strength and damping capacity.Information provided by Zakłady Azotowe w Tarnowie-Moscicach S.A. |
|||
| Melting Point | 167 °C | 333 °F | 10°C/min.; ISO 3146 |
| Azoty Tarnow™ TARNOFORM 500 GF6 POM 30% glass fiber reinforced, high flow injection molding grade, suitable for applications where high strength and stiffness is required, combined with higher flowability during molding.Information pr.. |
|||
| Melting Point | 167 °C | 333 °F | 10°C/min.; ISO 3146 |
| Azoty Tarnow™ TARNOFORM 700 POM Easy flowing grade for injection molding of thin-walled parts or in case of long flow path.Information provided by Zakłady Azotowe w Tarnowie-Moscicach S.A. |
|||
| Melting Point | 167 °C | 333 °F | 10°C/min; ISO 11357-1,-2,-3 |
| Celanese Celcon® GC90UV POM, 10% UV Resistant Celcon« acetal copolymer grade GC90UV is a specialty grade combining glass coupling for improved strength and stiffness and UV stabilization for improved performance in exposure to artificial light.. |
|||
| Melting Point | 167 °C | 333 °F | ASTM Test |
| BASF Ultraform N 2640 Z4 UNC Q600 POM Ultraform N2640 Z4 UNC Q600 is a high toughness, elastomer-modified injection molding POM grade. |
|||
| Melting Point | 167 °C | 333 °F | DIN 53765 |
| BASF Ultraform® N2320 0035 LEV POM Description: Is a POM, rapidly solidifying standard grade with improved impact strength for injection moldingInformation provided by BASF |
|||
| Melting Point | 167 °C | 333 °F | ISO 11357-1/-3 |
| BASF Ultraform® N2640 Z2 POM + PUR Description: Elastomer-modified injection molding grade with high impact strength for clips, snap and fastening elements, and also for components subject to impact stress.Information provided by BAS.. |
|||
| Melting Point | 167 °C | 333 °F | DIN 53765 |
| BASF Ultraform® S2320 0035 POM Description: Is a POM, free-flowing and rapidly solidifying standard grade with improved impact strength for injection molding.Information provided by BASF |
|||
| Melting Point | 167 °C | 333 °F | 10°C/min; ISO 11357-1,-2,-3 |
| Celanese Hostaform® LM25 POM, Specialty Hostaform« LM25 is a 2.5 melt flow acetal copolymer which is capable of being permanently marked by a laser. Parts molded from Hostaform« LM25 can be lasermarked with bar-codes, identification num.. |
|||
| Melting Point | 167 °C | 333 °F | 10°C/min; ISO 11357-1,-2,-3 |
| Celanese Hostaform® LGC90-QX POM, 26% Glass Reinforced Preliminary Data Sheet26% long fiber glass filled, high strengthLong Fiber Reinforced Thermoplastic products may be processed using current standard injection molding machines having screw diameters.. |
|||
| Melting Point | 167 °C | 333 °F | DSC |
| Arkema Group OREVAC® CA 100 Grafted Maleic Anhydride Polypropylene OREVAC® CA 100 is a chemically functionalized polypropylene with a high content of maleic anhydride. Grafting on polypropylene backbone is achieved with a processing technology which allows to opti.. |
|||
| Melting Point | 167 °C | 333 °F | 10°C/min.; ISO 3146 |
| Azoty Tarnow™ TARNOFORM 300 GB4 POM 20% glass beads filled grade with increased stiffness and hardness with lowered shrinkageInformation provided by Zakłady Azotowe w Tarnowie-Moscicach S.A. |
|||
| Melting Point | 167 °C | 333 °F | 10°C/min.; ISO 3146 |
| Azoty Tarnow™ TARNOFORM 300 HI6 POM Rubber modified grade with very high impact strength and damping capacity.Information provided by Zakłady Azotowe w Tarnowie-Moscicach S.A. |
|||
| Melting Point | 167 °C | 333 °F | |
| BASF Ultraform® S2320 003 PRO BK 00120 POM Description: Is a POM, is a standard flowing and rapidly freezing grade suitable for standard functional applications.Information provided by BASF |
|||
| Melting Point | 167 °C | 333 °F | 10°C/min; ISO 11357-1,-2,-3 |
| Celanese Celcon® CF802 POM, Specialty
(Unverified Data**) Celcon® acetal copolymer grade CF802 is a conductive, fuel compatible general purpose acetal copolymer. Celcon® CF802 has been developed to dissipate static electricity from fuel handling systems... |
|||
| Melting Point | 167 °C | 333 °F | 10°C/min; ISO 11357-1,-2,-3 |
| Celanese Celcon® LM90Z POM, Specialty
(Unverified Data**) Celcon® LM90Z is a UV stable, nominal 9 melt flow acetal copolymer which is capable of being permanently marked by a laser. It gives protection against property and color deterioration in applicati.. |
|||
| Melting Point | 167 °C | 333 °F | 10°C/min; ISO 11357-1,-2,-3 |
| Celanese Celcon® M90-45XAP® POM, Specialty
(Unverified Data**) Celcon® acetal copolymer grade M90-45XAP® is a UV resistant, low emission version, medium viscosity polymer providing optimum performance in general purpose injection molding primarily for the in.. |
|||
| Melting Point | 167 °C | 333 °F | 10°C/min; ISO 11357-1,-2,-3 |
| Celanese Hostaform® M10AE POM
(Unverified Data**) POM copolymerHigh melt strengthInformation provided by Celanese |
|||
| Melting Point | 167 °C | 333 °F | 10°C/min; ISO 11357-1,-2,-3 |
| Celanese Hostaform® M90XAP® POM
(Unverified Data**) Hostaform® acetal copolymer grade M90 XAP® is a low emission version, medium viscosity polymer providing optimum performance in general purpose injection molding primarily for the interior automo.. |
|||
| Melting Point | 167 °C | 333 °F | DSC |
| Lubrizol Estane® 58437 Thermoplastic Polyurethane Type: Estane® 58437 is an 85A aromatic polyester-based thermoplastic polyurethane (TPU).Features: Excellent cold temperature properties and improved heat resistance.Uses: Blown and flat die/cast fi.. |
|||
Copyright © lookpolymers.com All Rights Reserved