Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tear Strength | 15.8 kN/m | 90.0 pli | Die B, Silicone Property; ASTM D624 |
Arlon A3020-R004-12 0.020" (0.508 mm) Cured Fusible Silicone Rubber with Sinusoidal Fiberglass Substrate
  1 inch width and 36 inches long. Design/Construction: Side 1: Cured Fusible Silicone Rubber Substrate: 25% sinusoidal FiberglassSide 2: Cured Fusible Silicone Rubber Interleave: Polyester Film Prod.. |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | Initial Tear Strength |
Saint-Gobain CHR® 2829-3(R) Acrylic Adhesive Zone Tape Specification Notes: 21CFR177.1550 compliant. All data based on a 0.003 inch test sample. Information provided by Saint Gobain Performance Products. |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | Initial Tear Strength |
Saint-Gobain CHR® SG03-03(R) Premium Glass-PTFE Backing Acrylic Adhesive Pressure Sensitive Tape Description: PTFE glass provide dimensional stability, high tensile strength and edge tear, operates over a temperature range from -100°F to +500°F (-73°C to 260°C), and offers better ab.. |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | Initial Tear Strength |
Saint-Gobain CHR® SG16-03(R) High Performance Glass-PTFE Backing Silicone Adhesive Pressure Sensitive Tape Description: PTFE glass provide dimensional stability, high tensile strength and edge tear, operates over a temperature range from -100°F to +500°F (-73°C to 260°C), and offers better ab.. |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | Tensile Strength (Fill) |
Saint-Gobain Chemfab® 500F PTFE Coated Beta Fiberglass Conveyor Belting Description: General Notes on Saint Gobain Belting Products:Saint Gobain Performance Plastics developed its belting materials for applications that require superior release characteristics, permeabi.. |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | Initial Tear Strength |
Saint-Gobain CHR® C665 Copper Foil Backing Acrylic Adhesive Pressure Sensitive Tape Description: Aluminum and copper foil tapes offer high conformability, conductivity, and reflectivity at elevated temperatures. Aluminum is available with a fiberglass laminate for applications requ.. |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | |
Dow Corning SILASTIC® M RTV SILICONE RUBBER BASE & CURING AGENT (BLUE) High durometer mold making silicone rubber suited for the reproduction of architectural, furniture components and prototypes. Silastic M is recommended for use with rigid and foam polyurethane and c.. |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | |
Cytec EN-12 (Conap) Casting, Potting, and Molding Compound High Technology Potting, Casting and Molding CompoundsTwo-component, polybutadiene-based liquid urethane casting and potting systems. When reacted these high technology systems produce tough, stable.. |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | Die B; Silicone Property; ASTM D624 |
Arlon 51629R020 0.020" Uncured/Cured Silicone Rubber with Fiberglass Substrate Design/Construction:Interleave: 3 mil polyLayer 2: Uncured Silicone RubberLayer 1: Cured Silicone RubberSubstrate: Style 7628 FiberglassThis data represents typical values for the production mat.. |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | [ppiw], Silicone Property; ASTM D624 |
Arlon 55148R036 0.036" (0.914 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate Design/Construction: Interleave: Polyethylene Side 2, Layer 2: Uncured Silicone Rubber Side 2, Layer 1: Cured Silicone RubberSubstrate: Style 162 Fiberglass Side 1: Cured Silicone Rubber This data r.. |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | [ppiw], Silicone Property; ASTM D624 |
Arlon 56146R028 0.028" (0.711 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate Design/Construction: Interleave: PolyethyleneSide 2: Uncured Silicone Rubber Substrate: 1564 Style Fiberglass Side 1: Cured Silicone Rubber Product Use: Flexible heater insulationAppearance: Red si.. |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | Die B; silicone property; ASTM D624 |
Arlon 56276R026 Silicone Rubber/Fiberglass Laminate Interleave: 3 mil PE; Side 2: uncured silicone rubber; Substrate: 162 fiberglass; Side 1: cured silicone rubber |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | Die B; silicone property; ASTM D624 |
Arlon CP-510R Silicone Rubber bulk compound |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | Die B, Silicone Property; ASTM D624 |
Arlon R37642R062 0.062" (1.57 mm) Cured Silicone Rubber with PTFE Coated Fiberglass Carrier Design/Construction:Interleave: PolyethyleneSide 1: Cured Silicone Rubber This data Represents typical values for the production material. The data should not be used to write, or in place of, mater.. |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | ASTM D624 |
Arlon R39091R036 0.036" (0.914 mm) Uncured Silicone Rubber with Nomex Fabric Substrate Design/Construction: Interleave: Polyethylene Side 1: Uncured Silicone RubberSubstrate: Style 1574 Nomex FabricSide 2: Uncured SiliconeInterleave: Polyethylene This data represents typical values fo.. |
|||
Tear Strength | 15.8 kN/m @Temperature 25.0 °C, Time 259000 sec |
90.0 pli @Temperature 77.0 °F, Time 72.0 hour |
B, Cured |
ACC QM 107 QSI Quantum Silicones 7 Durometer Condensation Cure Moldmaking Material QM 107 is a two component, room temperature condensation cure silicone material. The cured rubber is very soft, has excellent mechanical properties and good shelf-life stability. This material is us.. |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | Die B; Silicone Property; ASTM D624 |
Arlon 51141R027 0.0270" Uncured Silicone Rubber with Fiberglass Substrate Design/Construction:Interleave: 2.5 mil PESide 1: Uncured Silicone RubberSubstrate: Style 7628 FiberglassSide 2: Uncured Silicone RubberInterleave: 2.5 mil PEThis data represents typical values .. |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | Die B; silicone property; ASTM D624 |
Arlon 51276R015 Silicone Rubber/Fiberglass Laminate Side 1: cured silicone rubber; Substrate: 7628 fiberglass; Side 2: uncured silicone rubber; Interleave: 3 mil polyethylene |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | Die B; silicone property; ASTM D624 |
Arlon 51276R020 Silicone Rubber/Fiberglass Laminate Side 1: cured silicone rubber; Substrate: 7628 fiberglass; Side 2: uncured silicone rubber; Interleave: 3 mil polyethylene |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | [ppiw], Die B, Silicone Property; ASTM D624 |
Arlon 55106R030 0.030" (0.762 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate Design/Construction: Interleave: Polyethylene Side 1: Uncured Silicone RubberSubstrate: Style 162 FiberglassSide 2: Cured Silicone Rubber Product Use: Flexible heater insulationAppearance: Red silic.. |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | [ppiw], Die B, Silicone Property; ASTM D624 |
Arlon 55108R030 0.030" (0.762 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate Design/Construction: Interleave: Polyethylene Side 2, Layer 2: Uncured Silicone RubberSide 2, Layer 1: Cured Silicone RubberSubstrate: Style 162 FiberglassSide 1: Cured Silicone Rubber This data rep.. |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | Die B, layer 1; ASTM D624 |
Arlon 55109R028 Silicone Rubber/Fiberglass Laminate Interleave: 3 mil PE; Layer 2: uncured silicone rubber; Layer 1: cured silicone rubber; Substrate: 162 fiberglass |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | Die B; silicone property; ASTM D624 |
Arlon 55143R060 Silicone Rubber/Fiberglass Laminate Interleave: 3 mil PE; Side 2: cured silicone rubber; Substrate: 162 fiberglass; Side 1: cured silicone rubber |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | Layer 2, Die B, [ppiw], Silicone Property; ASTM D624 |
Arlon 55149R028 0.0295" (0.749 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate Design/Construction: Interleave: Polyethylene Layer 2: Uncured Silicone Rubber Layer 1: Cured Silicone RubberSubstrate: Style 162 Fiberglass Product Use: Flexible heater insulationAppearance: Red si.. |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | [ppiw], Die B, Silicone Property; ASTM D624 |
Arlon 55271R028 0.028" (0.711 mm) Uncured Silicone Rubber with Fiberglass Substrate Design/Construction: Interleave 1: Polyethylene Side 1: Cured Silicone Rubber Substrate: Style 162 Fiberglass Side 2: Cured Silicone Rubber Interleave 2: Polyethylene Product Use: Flexible heater in.. |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | [ppiw], Layer 2, Die B, Silicone Property; ASTM D624 |
Arlon 55279R033 0.033" (0.838 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate Design/Construction: Interleave: Polyethylene Layer 2: Uncured Silicone Rubber Layer 1: Cured Silicone Rubber Substrate: Style 162 Fiberglass Product Use: Flexible heater insulationAppearance: Red s.. |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | Die C (graves), 20 in/min; ASTM D624 |
PolyOne Synprene® RT-3740 Thermoplastic Elastomer - SBC, Mineral Filled
(discontinued **) Description/Features:Multi-Purpose Thermoplastic ElastomerMineral FilledNaturalApplications:General PurposeMarket:Consumer GoodsIndustrialBuilding and ConstructionProcessing Method:Injection Molding.. |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | Die B, Silicone Property; ASTM D624 |
Arlon 44278R018 0.018" Uncured/Cured/Uncured Silicone Rubber Laminate with Fiberglass Substrate Design/Construction:Interleave 1: LDPESide 1 Layer 2: Uncured Silicone RubberSide 1 Layer 1: Cured Silicone RubberSubstrate: Style 1165 FiberglassSide 2: Uncured Silicone RubberInterleave: LDPEUL.. |