Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tear Strength | 15.8 kN/m | 90.0 pli | Die C; ASTM D624 |
Northstar Polymers MPP-A47A Liquid Castable Polyurethane MPP-A47A is a room-temperature-cure liquid castable polyurethane system. This ether-base polyurethane system is used in applications such as mold-making, prototyping, production of cast parts, pott.. |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | Die B, Silicone Property; ASTM D624 |
Arlon A3020-R004-12 0.020" (0.508 mm) Cured Fusible Silicone Rubber with Sinusoidal Fiberglass Substrate
  1 inch width and 36 inches long. Design/Construction: Side 1: Cured Fusible Silicone Rubber Substrate: 25% sinusoidal FiberglassSide 2: Cured Fusible Silicone Rubber Interleave: Polyester Film Prod.. |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | Die C; ASTM D624 |
Mearthane Durethaneâ„¢ S DS-230A Solid Polyurethane Elastomer TDI backbone: ester.Summary: Durethane S is a solid urethane elastomer. Formulations are individually compounded and tested to meet OEM requirements for durometer, tensile strength, tear strength, .. |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | Initial Tear Strength |
Saint-Gobain CHR® SG03-03(R) Premium Glass-PTFE Backing Acrylic Adhesive Pressure Sensitive Tape Description: PTFE glass provide dimensional stability, high tensile strength and edge tear, operates over a temperature range from -100°F to +500°F (-73°C to 260°C), and offers better ab.. |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | Initial Tear Strength |
Saint-Gobain CHR® SG25-03(R) Primary Glass-PTFE Backing Silicone Adhesive Pressure Sensitive Tape Description: PTFE glass provide dimensional stability, high tensile strength and edge tear, operates over a temperature range from -100°F to +500°F (-73°C to 260°C), and offers better ab.. |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | Initial Tear Strength |
Saint-Gobain CHR® SG26-03(R) Primary Glass-PTFE Backing Silicone Adhesive Pressure Sensitive Tape Description: PTFE glass provide dimensional stability, high tensile strength and edge tear, operates over a temperature range from -100°F to +500°F (-73°C to 260°C), and offers better ab.. |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | Initial Tear Strength |
Saint-Gobain CHR® C665 Copper Foil Backing Acrylic Adhesive Pressure Sensitive Tape Description: Aluminum and copper foil tapes offer high conformability, conductivity, and reflectivity at elevated temperatures. Aluminum is available with a fiberglass laminate for applications requ.. |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | ASTM D624 |
Teknor Apex UNIPRENE® 7100-55 Thermoplastic Elastomer Information provided by Teknor Apex Company |
|||
Tear Strength | 15.8 kN/m | 90.2 pli | ASTM D624 |
Teknor Apex Uniprene® UN-7100-55 Thermoplastic Vulcanizate Notes: Injection Rate: Fast Uses: Expansion Joint; Grommets; Tubing; Gaskets; Plugs; Weatherstripping; Glazing; Shock Absorbing Pads Forms: Pellets Processing Method: Extrusion; Injection Molding Ex.. |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | |
Dow Corning SILASTIC® M RTV SILICONE RUBBER BASE & CURING AGENT (BLUE) High durometer mold making silicone rubber suited for the reproduction of architectural, furniture components and prototypes. Silastic M is recommended for use with rigid and foam polyurethane and c.. |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | silicone property; ASTM D624 |
Arlon 51141R015 Silicone Rubber/Fiberglass Laminate Interleave 1: 3 mil PE; Side 1: uncured silicone rubber; Substrate: 7628 fiberglass; Side 2: uncured silicone rubber; Interleave 2: 3 mil PE |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | silicone property; ASTM D624 |
Arlon 51146R020 Silicone Rubber/Fiberglass Laminate Side 1: cured silicone rubber; Substrate: 7628 fiberglass; Side 2: uncured silicone rubber; Interleave: 3 mil polyethylene |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | Die B; Silicone Property; Arlon SQA-TMS-029 |
Arlon 51146R050 0.050" Cured/Uncured Silicone Rubber with Fiberglass Substrate Design/Construction:Side 1: Cured Silicone RubberSubstrate: Style 7628 FiberglassSide 2: Uncured Silicone RubberInterleave: 2.5 mil PEThis data represents typical values for the production materi.. |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | Die B; Silicone Property; ASTM D624 |
Arlon 51629R020 0.020" Uncured/Cured Silicone Rubber with Fiberglass Substrate Design/Construction:Interleave: 3 mil polyLayer 2: Uncured Silicone RubberLayer 1: Cured Silicone RubberSubstrate: Style 7628 FiberglassThis data represents typical values for the production mat.. |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | [ppiw], Silicone Property; ASTM D624 |
Arlon 56141R025 0.025" (0.635 mm) Uncured Silicone Rubber with Fiberglass Substrate Design/Construction: Interleave: PolyethyleneSide 2: Uncured Silicone Rubber Substrate: 1564 Style Fiberglass Side 1: Uncured Silicone Rubber This data represents typical values for the production m.. |
|||
Tear Strength | 15.8 kN/m @Temperature 25.0 °C, Time 259000 sec |
90.0 pli @Temperature 77.0 °F, Time 72.0 hour |
B, Cured |
ACC QM 107 QSI Quantum Silicones 7 Durometer Condensation Cure Moldmaking Material QM 107 is a two component, room temperature condensation cure silicone material. The cured rubber is very soft, has excellent mechanical properties and good shelf-life stability. This material is us.. |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | Silicone Property; ASTM D624 |
Arlon 31140R025 0.032" Uncured Silicone Rubber on Release Coated HDPE Design/Construction:Interleave: 0.003" PolyethyleneSide 1: Uncured Silicone RubberRelease Carrier: Release Coated HDPEThis data represents typical values for the production material and should no.. |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | Die B, Silicone Property; ASTM D624 |
Arlon 51146R028 0.028" (0.711 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate Design/Construction: Side 1: Cured Silicone RubberSubstrate: Style 7628 FiberglassSide 2: Uncured Silicone Rubber Interleave: Polyethylene Product Use: Flexible heater insulationAppearance: Red sili.. |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | Die B; silicone property; ASTM D624 |
Arlon 51276R020 Silicone Rubber/Fiberglass Laminate Side 1: cured silicone rubber; Substrate: 7628 fiberglass; Side 2: uncured silicone rubber; Interleave: 3 mil polyethylene |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | [ppiw], Silicone Property; ASTM D624 |
Arlon 55146R030 0.030" (0.762 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate Design/Construction: Interleave: Polyethylene Side 2: Uncured Silicone RubberSubstrate: Style 162 Fiberglass Side 1: Cured Silicone Rubber Product Use: Flexible heater insulationAppearance: Red sili.. |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | Layer 2, Die B, [ppiw], Silicone Property; ASTM D624 |
Arlon 55149R028 0.0295" (0.749 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate Design/Construction: Interleave: Polyethylene Layer 2: Uncured Silicone Rubber Layer 1: Cured Silicone RubberSubstrate: Style 162 Fiberglass Product Use: Flexible heater insulationAppearance: Red si.. |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | Die B; silicone property; ASTM D624 |
Arlon 55149R062 Silicone Rubber/Fiberglass Laminate Interleave: 3 mil PE; Layer 2: uncured silicone rubber; Layer 1: cured silicone rubber; Substrate: 162 fiberglass |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | [ppiw], Die B, Silicone Property; ASTM D624 |
Arlon 55271R028 0.028" (0.711 mm) Uncured Silicone Rubber with Fiberglass Substrate Design/Construction: Interleave 1: Polyethylene Side 1: Cured Silicone Rubber Substrate: Style 162 Fiberglass Side 2: Cured Silicone Rubber Interleave 2: Polyethylene Product Use: Flexible heater in.. |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | [ppiw], Die B, Silicone Property; ASTM D624 |
Arlon 55272R024 0.024" (0.610 mm) Cured Silicone Rubber with Fiberglass Substrate Design/Construction: Interleave: Polyethylene Side 1: Cured Silicone Rubber Substrate: Style 162 FiberglassThis data represents typical values for the production material. The data should not be use.. |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | [ppiw], Die B, Silicone Property; ASTM D624 |
Arlon 55276R026 0.026" (0.660 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate Design/Construction: Interleave: Polyethylene Side 2: Uncured Silicone Rubber Substrate: Style 162 FiberglassSide 1: Uncured Silicone Rubber Product Use: Flexible heater insulationAppearance: Red si.. |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | [ppiw], Layer 1, Die B, Silicone Property; ASTM D624 |
Arlon 55279R055 0.055" (1.40 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate Design/Construction: Interleave: Polyethylene Layer 2: Uncured Silicone Rubber Layer 1: Cured Silicone Rubber Substrate: Style 162 Fiberglass Product Use: Flexible heater insulationAppearance: Red s.. |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | Die B; silicone property; ASTM D624 |
Arlon CP-414R Silicone Rubber bulk compound |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | Die C (graves), 20 in/min; ASTM D624 |
PolyOne Synprene® RT-3830E Thermoplastic Elastomer - SBC
(discontinued **) Synprene™ thermoplastic elastomers (TPEs) are compounds based on styrenic block copolymer (SBC) technology, and can be formulated to deliver extremely low hardness values not found in other elastom.. |
|||
Tear Strength | 15.8 kN/m | 90.0 pli | [ppiw], Die B, Silicone Property; ASTM D624 |
Arlon 48271R010 0.010" (0.254 mm) Uncured Silicone Rubber with Fiberglass Substrate Design/Construction: Interleave 1: Polyethylene Side 1: Uncured Silicone RubberSubstrate: Style 1080 FiberglassSide 2: Uncured Silicone RubberInterleave 2: Polyethylene Product Use: Flexible heater .. |