Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Ultimate | 6.90 MPa | 1000 psi | X, Y direction; ASTM D638 |
Rogers Corporation RT/duroid® 6002 High Frequency Laminate Features:Low loss for excellent high frequency performanceTight dielectric constant and thickness controlExcellent electrical and mechanical propertiesExtremely low thermal coefficient of dielectric.. |
|||
Tensile Strength, Ultimate | 6.90 MPa | 1000 psi | TPE-0153 (ASTM D 412) |
Advanced Elastomer Systems Santoprene® 181-64 Thermoplastic Rubber
(discontinued **) A black thermoplastic medical grade elastomer with good fluid resistance, certified non-toxic by MEM elution test. It has USP Class VI Certificate of Compliance for biocompatibility and can be proc.. |
|||
Tensile Strength, Ultimate | 6.90 MPa | 1000 psi | TPE-0153 (ASTM D 412) |
Advanced Elastomer Systems Trefsin® 3101-75 W305 Thermoplastic Rubber
(discontinued **) A black thermoplastic elastomer with excellent permeation resistance to water, air and other gases. It can be processed using injection molding, extrusion, blow molding or other melt processing tec.. |
|||
Tensile Strength, Ultimate | 6.90 MPa | 1000 psi | TPE-0153 (ASTM D 412) |
Advanced Elastomer Systems Trefsin® 3201-75 W305 Thermoplastic Rubber
(discontinued **) A natural thermoplastic elastomer with excellent permeation resistance to water, air and other gases. It can be processed using injection molding, extrusion, blow molding or other melt processing t.. |
|||
Tensile Strength, Ultimate | 6.90 MPa | 1000 psi | |
Freudenberg Simrit S70 Silicone Elastomer Excellent material for static service at extreme (hot or cold) temperatures. Outstanding flex and fatigue life. Very good for ozone and UV radiation service as well as for resistance to fungal and b.. |
|||
Tensile Strength, Ultimate | 6.90 MPa | 1000 psi | ASTM D3574E |
Mearthane Durethaneâ„¢ M DM-710A Foam Polyurethane MDI backbone: ether.Shore 00 Hardness: 55Summary: Durethane M is a flexible, microcellular, open cell and closed cell urethane foam. Because it is mechanically mixed, the cell size is uniform. Dur.. |
|||
Tensile Strength, Ultimate | 6.90 MPa | 1000 psi | ASTM D412 |
Multibase Multi-Flex® TPE A 5501 LC GREY Multi-Flex TPE contains Kraton™ G.Data provided by Multibase. |
|||
Tensile Strength, Ultimate | 6.90 MPa @Temperature 49.0 °C |
1000 psi @Temperature 120 °F |
Type IV, crosshead speed 2 in/min; ASTM D638 |
DuPont Elvax® 550 Ethylene-Vinyl Acetate Copolymer Resin Elvax resins offer a unique combination of processing and performance characteristics. They provide outstanding toughness and resilience and maintain flexibility over a broad temperature range with.. |
|||
Tensile Strength, Ultimate | 6.90 MPa | 1000 psi | 508 mm/min; ASTM D638 |
Dow Engage® 8200 Polyolefin Elastomer Description: Engage® 8200 and Engage® 8207 polyolefin elastomers are ethylene-octene copolymers that have excellent flow characteristics and performs well in a wide range of general purpose thermo.. |
|||
Tensile Strength, Ultimate | 6.90 MPa | 1000 psi | 508 mm/min; ASTM D638 |
Dow Engage® 8207 Polyolefin Elastomer Description: Engage® 8207 polyolefin elastomer is a loose talc surface coated ethylene-octene copolymer. The talc is untreated and has a nominal 1µm particle size. This product offers the exceptio.. |
|||
Tensile Strength, Ultimate | >= 6.90 MPa | >= 1000 psi | |
Arlon 0.010" (0.254 mm) Layer-on-Layer Silicone Traction Motor Insulation (51229R020) 0.010 in. (0.25 mm) minimum uncured silicone on 0.002 in. (0.5 mm) minimum cured silicone on 0.008 in. (0.2 mm) nominal Prime Coated 7628 Fiberglass; 0.003 in. (0.08 mm) polyethylene interleave; ove.. |
|||
Tensile Strength, Ultimate | >= 6.90 MPa | >= 1000 psi | |
Arlon 0.015" (0.381 mm) Flexible Heater Silicone with Fiberglass Substrate (51941C015) Uncured silicone rubber with a minimum thickness of 0.003 in. (0.08 mm)/0.008 in. (0.2 mm) Prime Coated 7628 Fiberglass/Uncured silicone rubber with a minimum thickness of 0.003 in. (0.08 mm); 0.003.. |
|||
Tensile Strength, Ultimate | >= 6.90 MPa | >= 1000 psi | |
Arlon 0.015" (0.381 mm) Layer-on-Layer Silicone Traction Motor Insulation (51229R015) 0.005 in. (0.1 mm) minimum uncured silicone on 0.002 in. (0.5 mm) minimum cured silicone on 0.008 in. (0.2 mm) nominal Prime Coated 7628 Fiberglass; 0.003 in. (0.08 mm) polyethylene interleave; over.. |
|||
Tensile Strength, Ultimate | >= 6.90 MPa | >= 1000 psi | |
Arlon 0.020" (0.508 mm) Silicone Traction Motor Insulation with Fiberglass Substrate (19220R020) Uncured silicone rubber with a minimum thickness of 0.005 in. (0.13 mm) on Prime Coated 1523 Fiberglass; 0.0015 in. (0.8 mm) polyethylene interleave; overall thickness 0.020 in ± 0.0015 (0.51 mm ±.. |
|||
Tensile Strength, Ultimate | >= 6.90 MPa | >= 1000 psi | |
Arlon 0.030" (0.762 mm) Silicone Traction Motor Insulation with Fiberglass Substrate (19220R030) Uncured silicone rubber with a minimum thickness of 0.015 in.(0.38 mm) on Prime Coated 1523 Fiberglass; 0.0015 in. (0.8 mm) polyethylene interleave; overall thickness 0.030 in ± 0.003 (0.76 mm ± 0.. |
|||
Tensile Strength, Ultimate | >= 6.90 MPa | >= 1000 psi | |
Arlon Thermavac® 0.030" (0.762 mm) Uncured Silicone Vacuum Bagging (30400N030) Uncured, unsupported silicone rubber with a thickness of 0.030 in ± 0.003 (0.76 mm ± 0.038) on a Kodacel carrier (0.005 in., 0.13 mm nominal thickness); 0.003 in. (0.8 mm) polyethylene interleave... |
|||
Tensile Strength, Ultimate | 6.90 MPa | 1000 psi | TPE-0153 (ASTM D 412) |
Advanced Elastomer Systems Santoprene® 101-64 W175 Thermoplastic Rubber
(discontinued **) A black thermoplastic general purpose elastomer designed for thin wall extrusion with good fluid resistance, formulated to replace thermoset elastomers such as EPDM, polychloroprene, and chlorosulfo.. |
|||
Tensile Strength, Ultimate | 6.90 MPa | 1000 psi | TPE-0153 (ASTM D 412) |
Advanced Elastomer Systems Santoprene® 281-64 Thermoplastic Rubber
(discontinued **) A colorable thermoplastic medical grade elastomer with good fluid resistance, certified non-toxic by MEM elution test. It has USP Class VI Certificate of Compliance for biocompatibility and can be .. |