Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Ultimate | 38.6 MPa | 5600 psi | ASTM D1708 |
DSM Biomedical BioSpan® S SPU Segmented Polyether Polyurethane (SPU) The flex life exhibited by BioSpan® SPU enables good performance in many different types of medical devices. This elastomeric polymer has shown the ability to withstand millions of flex cycles.The .. |
|||
Tensile Strength, Ultimate | 38.6 MPa | 5600 psi | Wet (24 Immersion) |
AdvanSource Biomaterials HYDROTHANE™ Hydrophilic Thermoplastic Polyurethane AdvanSource Biomaterials Corporation manufactures and markets hydrophilic high slip, high water absorptive, polyether aliphatic polyurethanes designed for use as coatings of catheters, sutures, intr.. |
|||
Tensile Strength, Ultimate | 38.6 MPa | 5600 psi | after optimum cure |
Armstrong A-10-T Epoxy Adhesive Clear, thixotropic, 5-minute cure general-purpose epoxy adhesive. Provides rapid high strength bonds to many substrates. Supplied in 1:1 ratio dispense kits for easy application.Information provid.. |
|||
Tensile Strength, Ultimate | 38.6 MPa | 5600 psi | after optimum cure |
Armstrong C-4/W Epoxy Adhesive A low viscosity, clear amber, unfilled adhesive, recommended for use with activators D or W. C-4 with Activator W offers maximum versatility in that differing degrees of flexibility can be achieved .. |
|||
Tensile Strength, Ultimate | 38.6 MPa | 5600 psi | ASTM D638 |
BCC Products Proto-Kast BC 8163 Urethane Casting BC 8163 is a very low viscosity, rapid setting, rigid urethane compound. This system will cure quickly to a hard, tough, impact resistant casting. BC 8163 is non-sensitive to moisture after cure and.. |
|||
Tensile Strength, Ultimate | 38.6 MPa | 5600 psi | after optimum cure |
Armstrong A-1/E Epoxy Adhesive A brown epoxy paste formulated with enhanced wetting capabilities to hard rubbers and rigid thermoplastics. Has low outgassing characteristics at temperatures below 250°FInformation provided by El.. |
|||
Tensile Strength, Ultimate | 38.6 MPa | 5600 psi | ASTM D638-95 |
Multibase Multi-ABS 3245 FR Flame Retardant ABS Data provided by Multibase. |
|||
Tensile Strength, Ultimate | 38.6 MPa | 5600 psi | ASTM D412/D638 |
Lubrizol ESTANE® 58209 Ester Based Thermoplastic Polyurethane Description: Estane® thermoplastic polyurethanes (TPUs) include elastomeric materials that bridge the gap between flexible rubber and rigid plastics. These materials offer toughness and durability .. |
|||
Tensile Strength, Ultimate | 38.6 MPa | 5600 psi | ASTM D638-95 |
Multibase Multi-ABS 2945 FR Flame Retardant ABS Data provided by Multibase. |