Polymer Property : Tensile Strength, Ultimate = 350 MPa Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Tensile Strength, Ultimate	350 MPa @Temperature 300 °C	50800 psi @Temperature 572 °F	EN min.; EN 10002-5
Outokumpu 4878 High Temperature Austenitic Stainless Steel Heat-resistant variant of 1.4541, with a slightly higher max carbon content. Recommended max service temperature for this steel in dry air is 800°C. Applications: Heat and creep resistance. For ..
Tensile Strength, Ultimate	>= 350 MPa	>= 50800 psi
H.C. Starck WCu 70/30 Tungsten-Copper Composite Material Description of Product: Tungsten-copper composite materials are produced by copper infiltration of porous sintered tungsten. They are available with different copper contents (10 - 30 %). A therm..
Tensile Strength, Ultimate	350 MPa @Temperature 870 Â°C	50800 psi @Temperature 1600 Â°F
Haynes 263Â® alloy, cold rolled sheet, solution treated and aged Very good aged strength properties, excellent fabrication characteristics when annealed, excellent intermediate temperature tensile ductility, is not normally subject to strain age cracking, excelle..
Tensile Strength, Ultimate	350 MPa @Temperature 300 Â°C	50800 psi @Temperature 572 Â°F	Annealed prior to test
Special Metals Nickel 201 Commercially pure (99.6%) wrought nickel essentially the same as Nickel 200 but with a lower carbon content to prevent embrittlement by intergranular carbon at temperatures over 600Â°F (315Â°C)...
Tensile Strength, Ultimate	350 - 420 MPa	50800 - 60900 psi
SSAB Tunnplat Aluzink 280A YP High-strength Metal-coated Steel High-strength Metal-coated SteelComments: Aluzink YP - HSLA steel (aluminum-zinc coated sheet). Property values are for thicknesses 0.4 - 2.0 mm. Iron content is approximate - exact composition is ..
Tensile Strength, Ultimate	<= 350 MPa	<= 50800 psi
SSAB Tunnplat Aluzink F40A Metal-coated Mild Steel Metal-coated Mild SteelComments: Aluzink - Aluminum-zinc coated sheet. Property values are for thicknesses 0.4 - 2.00 mm. Iron content is approximate - exact composition is not reported by the manu..
Tensile Strength, Ultimate	350 - 420 MPa	50800 - 60900 psi
SSAB Tunnplat Dogal 260YP High-strength Metal-coated Steel High-strength Metal-coated SteelComments: Dogal YP - HSLA steel. Property values are for thicknesses 0.4 to 2.5 mm. Iron content is approximate - exact composition is not reported by the manufactur..
Tensile Strength, Ultimate	350 - 420 MPa	50800 - 60900 psi
SSAB Tunnplat Dogal 280YP High-strength Metal-coated Steel High-strength Metal-coated SteelComments: Dogal YP - HSLA steel. Property values are for thicknesses 0.4 to 2.5 mm. Iron content is approximate - exact composition is not reported by the manufactur..
Tensile Strength, Ultimate	<= 350 MPa	<= 50800 psi
SSAB Tunnplat Dogal F36 Metal-coated Mild Steel Metal-coated Mild SteelComments: Dogal - Hotdipped-galvanized sheet. Property values are for thicknesses 0.5 - 2.5 mm. Iron content is approximate - exact composition is not reported by the manufac..
Tensile Strength, Ultimate	<= 350 MPa	<= 50800 psi
SSAB Tunnplat Dogal F40 Metal-coated Mild Steel Metal-coated Mild SteelComments: Dogal - Hotdipped-galvanized sheet. Property values are for thicknesses 0.5 - 2.5 mm. Iron content is approximate - exact composition is not reported by the manufac..
Tensile Strength, Ultimate	>= 350 MPa	>= 50800 psi
SSAB Tunnplat DomexÂ® 280XP Extra High-strength Cold-forming Steel Extra High-strength Cold-forming Steel, HSLACharacteristics: DomexÂ® is the brand name of hot rolled products from SSAB Tunnplat. DomexÂ® cold-forming steels are modern structural steels. Gene..
Tensile Strength, Ultimate	>= 350 MPa	>= 50800 psi
SSAB Tunnplat DomexÂ® 280YP Cold-forming Steel, HSLA Cold-forming Steel, HSLACharacteristics: DomexÂ® is the brand name of hot rolled products from SSAB Tunnplat. DomexÂ® cold-forming steels are modern structural steels. General use of DomexÂ®..
Tensile Strength, Ultimate	350 MPa	50800 psi
Sapco Silicon Nitride, Si3N4 Information provided by Sapco.
Tensile Strength, Ultimate	<= 350 MPa	<= 50800 psi
SSAB Tunnplat Aluzink F36A Metal-coated Mild Steel Metal-coated Mild SteelComments: Aluzink - Aluminum-zinc coated sheet. Property values are for thicknesses 0.4 - 2.00 mm. Iron content is approximate - exact composition is not reported by the manu..
Tensile Strength, Ultimate	350 MPa	50800 psi
Wieland 1410 Wilaform Gold Yield alloy. Particularly suitable for the production of strongly deformed or thick chains.Applications: casting, chains, coin/shapeDental
Tensile Strength, Ultimate	350 - 440 MPa	50800 - 63800 psi
CLAL-MSX CUPROROR® TL2 1/2 hard, Copper Alloy Alloy especially suited to applications in electronics and electro technology. This doped copper, displays high electrical and thermal conductivity, good mechanical properties and excellent temperat..
Tensile Strength, Ultimate	350 - 500 MPa	50800 - 72500 psi
CLAL-MSX NICLAL 3444 H12 1/2 Hard Copper Alloy, Free Cutting Bronze Main Characteristics: Excellent machineabilityHigh mechanical propertiesSelf lubricating alloyTypical Applications:Parts for connectorsFriction partsBearings-Pinions-Lock pinsInformation provided b..
Tensile Strength, Ultimate	350 - 410 MPa	50800 - 59500 psi
ArcelorMittal HSLA 260 High strength low alloy steel for cold forming, Cold Rolled Available in the following: uncoated (HC260LA), electroglavanized (HC260LA +ZE) and Extragal®/galfan/Galvannealed (HC260LA+Z/+ZA/+ZF)Description: Steels in the HSLA (High Strength Low Alloy) range ..
Tensile Strength, Ultimate	350 MPa	50800 psi
Ametek P303L P/M Stainless Steel, Sintered from 6.5 g/cc Green Density Powder apparent bulk density 2.8 g/cc; powder flow 30 sec/50g.Compacting properties measured on powders with 1% lithium stearate. Sintering was done in dissociated ammonia at 1121°C (2050°F) for ..