Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Ultimate | 138 MPa | 20000 psi | ASTM D638 |
Nylene® 4214-33 (HS) , 33% Glass Fiber Reinforced Impact Modified Nylon 6 Description: Nylene® 4214-33 (HS) is a 33% glass filled, high impact nylon 6. Information provided by Custom Resins.ALM, Nylene Canada, and Custom Resins are all operting companies of Polymeric Res.. |
|||
Tensile Strength, Ultimate | 138 MPa | 20000 psi | Type 1 - Rigids, 0.2 in/min; ASTM D638 |
PolyOne Edgetek® PK-15CF-15GB/000 Polyetheretherketone (PEEK), Glass Bead, Carbon Fiber Reinforced
(discontin Description/Features:Carbon Fiber ReinforcedGlass Bead FilledPolyOne First ChoiceInformation provided by PolyOne Corporation. |
|||
Tensile Strength, Ultimate | 138 MPa | 20000 psi | Type 1 - Rigids, 0.2 in/min; ASTM D638 |
PolyOne Lubri-Tech™ PF-30CF/15T Polysulfone, Carbon Fiber Reinforced, PTFE Lubricated
(discontinued **) Description/Features:Carbon Fiber ReinforcedPTFE LubricatedPolyOne First ChoiceInformation provided by PolyOne Corporation. |
|||
Tensile Strength, Ultimate | 138 MPa | 20000 psi | |
XXX Phenolic Laminate Paper based phenolic provides low cost electrical and mechanical properties. It is widely used for switchboards, panel boards, insulating washers, and intricate punched parts.Information provided b.. |
|||
Tensile Strength, Ultimate | 138 MPa | 20000 psi | ASTM D638 |
Global GPC-140 40% Glass Filled Polycarbonate Information provided by Global Polymers Corporation. |
|||
Tensile Strength, Ultimate | 138 MPa | 20000 psi | |
Meehanite GF-20 Flake Graphite Cast Iron Type GF-20 is designed principally for high machinability and is used where ultimate strength is not an important factor.General Meehanite information - Meehanite metal is first melted to a definite.. |
|||
Tensile Strength, Ultimate | 138 MPa | 20000 psi | ASTM D638 |
Techmer ES Electrafil® J-1/CF/10 Nylon 66, 10% Carbon Fiber Reinforced |
|||
Tensile Strength, Ultimate | 138 MPa | 20000 psi | ASTM D638 |
Techmer ES Electrafil® J-50/CF/20/TF/15 Polycarbonate, 20% Carbon Fiber Reinforced, 15% PTFE |
|||
Tensile Strength, Ultimate | 138 MPa | 20000 psi | ASTM D638 |
Techmer ES Plaslube® J-4/30/TF/15 Nylon 612, 30% GFR, 15% PTFE Plaslube glass fiber reinforced polytetrafluoroethylene (PTFE) lubricated nylon 612 grades offer a unique balance of excellent wear and friction performance with good dimensional stability and mecha.. |
|||
Tensile Strength, Ultimate | 138 MPa | 20000 psi | Large bars; Common application load less than 15,000 psi |
Dura-Bar G1 Continuously Cast Gray Iron Bar Stock ASTM A48 Dura-Bar G1 contains flake graphite in a matrix that is pearlitic with small amounts of ferrite. This is the softest grade of the Dura-Bar gray irons and is normally selected when excellent machinab.. |
|||
Tensile Strength, Ultimate | 138 MPa | 20000 psi | ASTM D638 |
Adell AL-18 Nylon 66, 40% Glass Reinforced; Mineral Filled Data provided by Adell Plastics, Inc. |
|||
Tensile Strength, Ultimate | 138 MPa | 20000 psi | ASTM D638 |
Chem Polymer Chemlon 125 G Nylon 66, 25% Glass Sphere Reinforced A 25% glass sphere reinforced nylon 66 offering a balance of rigidity, dimensional stability and surface appearance.Data provided by the manufacturer, Chem Polymer. |
|||
Tensile Strength, Ultimate | 138 MPa | 20000 psi | ASTM D638 |
A. Schulman ComAlloy Hiloy® 516 Polycarbonate, Carbon Fiber Reinforced Data provided by the manufacturer, ComAlloy International Company.20% Carbon Fiber Reinforced.The ComAlloy product line has been integrated into the A Schulman product line. |
|||
Tensile Strength, Ultimate | 138 MPa | 20000 psi | ASTM D638 |
A. Schulman ComAlloy Hiloy® 758 Carbon Fiber Reinforced, Flow Enhanced, PPS Alloy Data provided by the manufacturer, ComAlloy International Company.40% Carbon Fiber Reinforced. Superior toughness and impact resistance characterize Comtuf® materialsThe ComAlloy product line has b.. |
|||
Tensile Strength, Ultimate | 138 MPa | 20000 psi | ASTM D638 |
Adell ZR-17 33% Glass Reinforced Nylon/Olefin Alloy Data provided by Adell Plastics, Inc. |
|||
Tensile Strength, Ultimate | 138 MPa @Temperature 871 °C |
20000 psi @Temperature 1600 °F |
|
Carpenter Gall-Tough® Stainless Data provided by Carpenter Technology Corporation.6.4 mm diameter tensile specimens from center of 25.4 mm diameter bar annealed 1066°C 1 hour, water quenched, and ground.Threshold Galling Stress 1.. |
|||
Tensile Strength, Ultimate | 138 MPa | 20000 psi | ATSM D638 |
Ashley Polymers Ashlene® ABS Resin F-217 General purpose super high impact with good gloss.Data provided by the manufacturer |
|||
Tensile Strength, Ultimate | 138 MPa | 20000 psi | ISO data |
BASF Capron® 8332G Impact Modified, 25% Glass-Filled Nylon 6 (Dry)
(discontinued **) Capron 8332G is a 25% glass reinforced, impact modified polyamide 6 injection molding compound developed for applications requiring improved dry as molded toughness in combination with a balance of .. |