Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 9.70 MPa | 1410 psi | 500 mm/min; ASTM D638 |
Eastman E6838-889P Polyethylene
(discontinued **) Polyethylene E6838-889P is a formulation suggested for extrusion coating applications and has been used successfully in compounding. This product may be used for holding food during cooking.Applicat.. |
|||
Tensile Strength, Yield | 9.70 MPa | 1410 psi | 500 mm/min (20 in./min.); ASTM D638, Type IV Specimen |
Eastman 808E Polyethylene
(discontinued **) Low density polyethylene 808E is a general-purpose formulation used general-purpose extrusion. Under regulations administered by the US FDA, 808E may lawfully be used as articles or components of a.. |
|||
Tensile Strength, Yield | 9.70 MPa | 1410 psi | 500 mm/min (20 in./min.); ASTM D638, Type IV Specimen |
Eastman E6838-850P Polyethylene
(discontinued **) E6838-850P is a low density resin designed for applications where high coating speeds and good drawdown are required. The combination of high melt index and low density also provides good heat seal.. |
|||
Tensile Strength, Yield | 9.70 MPa | 1410 psi | 500 mm/min (20 in./min.); ASTM D638, Type IV Specimen |
Eastman E6838-862A Polyethylene
(discontinued **) E6838-862A is a low density formulation suggested for injection molding applications, such as closuresInformation supplied by the manufacturer.Information from manufacturer data sheet.Eastman Chemic.. |
|||
Tensile Strength, Yield | 9.70 MPa | 1410 psi | Molded property |
Dow DOWLEX™ 2244A Linear Low Density Polyethylene, Cast Film Grade DOWLEX® 2244A Polyethylene resin is a cast film polymer having superior optics in packaging applications. This material complies with U.S. FDA Regulation 21 CFR 177.1520 c 3.2 (a) food packaging ap.. |
|||
Tensile Strength, Yield | 9.70 MPa @Strain 50.0 % |
1410 psi @Strain 50.0 % |
50 mm/min |
Arkema Group Pebax® MV 1074 SN 01 Polyether Block Amide (PEBA) (Dry) POLYETHER BLOCK AMIDE (PEBA) hardness 40 shore D breathable (high permeability to H2O vapor,CO2,O2) permanent antistatic grade Applications: breathable films (medical, textile....) Permanent antista.. |