- HOME
- POLYMER SEARCH
- Polymer Property : Tensile Strength at Break = 3100 psi
Polymer Property : Tensile Strength at Break = 3100 psi Product List
Mechanical PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength at Break | 21.4 MPa | 3100 psi | Type IV, 510 mm/min; ASTM D638 |
| PolyOne Geon™ Vinyl Wire & Cable WJAC36L Polyvinyl Chloride, Flexible (PVC, Flexible) Typical Properties of Molded Slab (0.075); Not to be Construed as Specifications. Provisional Product Information - Physical and Mechanical properties based on initial production.Information provide.. |
|||
| Tensile Strength at Break | 21.4 MPa | 3100 psi | chs 2 in/min; ASTM D638 |
| Network Polymers NPS 90-0827 Polystyrene Description: Injection Molding Grade, High ImpactInformation provided by Network Polymers Inc. |
|||
| Tensile Strength at Break | 21.4 MPa | 3100 psi | Type IV, 510 mm/min; ASTM D638 |
| PolyOne Geon™ Vinyl Flexible B6D00 Polyvinyl Chloride, Flexible (PVC, Flexible) Information provided by PolyOne |
|||
| Tensile Strength at Break | 21.4 MPa | 3100 psi | ASTM D638 |
| Resirene Resirene® 6220 High Impact Polystyrene Features:Low FlowEasy ProcessingGood GlossHigh ElongationFDA Rating: 21 CFR 177.1640Mechanical StrengthApplications:Extrusion/ ThermoformingDisposablesGPPS/HIPS BlendsRefrigerator PartsInformation p.. |
|||
| Tensile Strength at Break | 21.4 MPa | 3100 psi | Type IV specimen, compression molded, crosshead speed 2 in/min; ASTM D638 |
| DuPont Nucrel® 535 Ethylene-Methacrylic Acid Copolymer Resin
(discontinued **) Nucrel® 535 is a tough, lightweight, easily processed ethylene copolymer resin. This resin is inherently flexible without the need for plasticizers. The resin can be pigmented, UV-stabilized for .. |
|||
| Tensile Strength at Break | 21.4 MPa | 3100 psi | ASTM D638 |
| LyondellBasell Alathon® M6080WC High Density Polyethylene ApplicationsALATHON M 6080WC is a natural, high density, polyethylene homopolymer resin with a narrow molecular weight distribution formulated for use as primary insulation for coaxial and control c.. |
|||
| Tensile Strength at Break | 21.4 MPa | 3100 psi | ASTM D638 |
| ITW Devcon Plastic Steel® Metal Repair 5 Minute® Putty (SF), Dark Grey Information provided by ITW Devcon |
|||
| Tensile Strength at Break | 21.4 MPa @Temperature 200 °C, Time 1.21e+6 sec |
3100 psi @Temperature 392 °F, Time 336 hour |
After Dry Heat Aging; ASTM D865 |
| Seals Eastern 7148 Fluorocarbon-Elastomer FKM specially for oil & gas service; ED resistantInformation provided by Seals Eastern, Inc. |
|||
| Tensile Strength at Break | 21.4 MPa | 3100 psi | ASTM D638 |
| Teknor Apex APEX® 3701-90NT Polyvinyl Chloride, Flexible Features: Non-DEHP Plasticizer; Ethylene Oxide Sterilizable; High Heat Resistance Uses: Medical/Healthcare Applications Processing Method: Extrusion Forms: PelletsInformation Provided by Teknor Apex.. |
|||
| Tensile Strength at Break | 21.4 MPa | 3100 psi | ASTM D638 |
| Teknor Apex APEX® 80458 Polyvinyl Chloride, Flexible Notes: 105°C Insulation; RoHS Compliant Uses: Wire and Cable ApplicationsForms: PelletsInformation Provided by Teknor Apex |
|||
| Tensile Strength at Break | 21.4 MPa | 3100 psi | ASTM D638 |
| Teknor Apex APEX® 80853-C Polyvinyl Chloride, Flexible Notes: 105°C, Non-lead Stabilized, Insulation; PVC Insulation intended for use in 90°C wet locations; RoHS CompliantFeatures: Flame Retardant; Oil Resistant Uses: Insulation; Wet Rated Insulat.. |
|||
| Tensile Strength at Break | 21.4 MPa | 3100 psi | ASTM D412 |
| Teknor Apex Monprene® MP-2375A Thermoplastic Elastomer Uses: Closures; Consumer Applications; Gaskets; Handles; Kitchenware; Medical/Healthcare Applications; Packaging; Safety Equipment; Sporting Goods; Toothbrush Handles; Tubing; Writing Instruments Fo.. |
|||
| Tensile Strength at Break | 21.4 MPa | 3100 psi | ASTM D638 |
| Teknor Apex Synres® SR 4321 Polypropylene Notes: The Specialty Compounding Division offers a proprietary line of mineral filled polyolefins, including talc and calcium carbonate filled polypropylenes. Typical applications include injection .. |
|||
| Tensile Strength at Break | 21.4 MPa | 3100 psi | ASTM D412 |
| Teknor Apex Telcar® TL-1427A Thermoplastic Elastomer Uses: Automotive Applications; Automotive Exterior Parts; Automotive Exterior Trim; Automotive Interior Parts; Blow Molding Applications; General Purpose; Grommets; Weatherstripping Forms: Pellets P.. |
|||
| Tensile Strength at Break | 21.4 MPa | 3100 psi | ASTM D638 |
| PlastxWorld DAICEL STYROL® GH10 HIPS High heat resistance and flame retarded HIPS.These are typical values and are not intended for specification purposes. UL approved file No. is E47773. Information provided by PlastxWorld Inc. |
|||
| Tensile Strength at Break | 21.4 MPa | 3100 psi | ASTM D638 |
| Chase Plastics CP Pryme® PPC300NB-10M Utility Polypropylene Copolymer Information provided by Chase Plastics. |
|||
| Tensile Strength at Break | 21.4 MPa | 3100 psi | Type IV specimen, compression molded, crosshead speed 2 in/min; ASTM D638 |
| DuPont Nucrel® 960 Ethylene-Methacrylic Acid Copolymer Resin Nucrel® 599 is a tough, lightweight, easily processed ethylene copolymer resin. This resin is inherently flexible without the need for plasticizers. The resin can be pigmented, UV-stabilized for .. |
|||
| Tensile Strength at Break | 21.4 MPa | 3100 psi | ASTM D638 |
| Amco Amalloy® B9714 Polymer Alloy Amco Amalloy B9714 is a clear performance copolymer with exceptional clarity and toughness.High elongation before breakage, good melt Flow.Information provided by Amco Plastic Materials. |
|||
| Tensile Strength at Break | 21.4 MPa | 3100 psi | ASTM D638 |
| Americas Styrenics STYRON A-TECH® 1400AS High Impact Polystyrene Product CharacteristicsHigh FlowGood ImpactFood Contact CompliantTypical ApplicationsTelevision housingsPrinter HousingsConsumer goodsInformation provided by AmericasStyrenics LLC. |
|||
| Tensile Strength at Break | 21.4 MPa | 3100 psi | Type IV, 510 mm/min; ASTM D638 |
| PolyOne Geon™ Vinyl Flexible R349AE Polyvinyl Chloride, Flexible (PVC, Flexible) Information provided by PolyOne |
|||
| Tensile Strength at Break | 21.4 MPa | 3100 psi | ASTM D638 |
| Resirene Resirene® 8450 High Impact Polystyrene (Chemical Resistant) Features:Low FlowChemical ResistantMechanical StrengthFDA Rating: 21 CFR 177.1640Applications:Extrusion/ThermoformingRegistration LinersExtruded SheetInformation provided by US distributor Calsak Co.. |
|||
| Tensile Strength at Break | >= 21.4 MPa | >= 3100 psi | ASTM D882 |
| M. Holland Company MAGMA® LL1092-K LLDPE
(discontinued **) Features: Good Heat Seal, Good Processability, Good Tear Strength, Good ToughnessProcessing Method: ExtrusionInformation provided by M. Holland. |
|||
| Tensile Strength at Break | 21.4 MPa | 3100 psi | Type IV, 510 mm/min; ASTM D638 |
| PolyOne Geon™ Vinyl Wire & Cable W2413 Polyvinyl Chloride, Flexible (PVC, Flexible) Typical Properties of Molded Slab (0.075); Not to be Construed as Specifications.Information provided by PolyOne |
|||
Copyright © lookpolymers.com All Rights Reserved