Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength at Break | >= 1.03 MPa | >= 150 psi | ASTM D412 |
Parker Chomerics CHO-SEAL 6370 Conductive Elastomer Commercial Grade Conductive Elastomer Extrusions. These materials offer excellent cost/performance characteristics for commercial EMI gasket applications. These silicone and fluorosilicone based con.. |
|||
Tensile Strength at Break | >= 1.03 MPa | >= 150 psi | ASTM D412 |
Parker Chomerics CHO-SEAL L6303 Conductive Elastomer Good performance in moderately corrosive environments; material of choice for flange finishes needing “bite-through” for good electrical contact.Molded and ExtrudedRoHS CompliantInformation provid.. |
|||
Tensile Strength at Break | >= 1.03 MPa | >= 150 psi | ASTM D412 |
Parker Chomerics CHO-SEAL S6304 Conductive Elastomer Conductive Elastomer EMI/EMP GasketsInformation provided by Chomerics |
|||
Tensile Strength at Break | >= 1.03 MPa | >= 150 psi | |
Parker Chomerics CHO-SEAL® 6370 Conductive Elastomer Flame Retardant Conductive Silicone Elastomer. CHO-SEAL 6370 EMI gaskets are conductive elastomers engineered for use in commercial electronic equipment where a high degree of flame retardancy and c.. |
|||
Tensile Strength at Break | >= 1.03 MPa | >= 150 psi | ASTM D412 |
Parker Chomerics CHO-SEAL® 6371 Conductive Elastomer Good performance in moderately corrosive environments; material of choice for flange finishes needing “bite-through” for good electrical contact.Molded onlyRoHS Compliant Information provided by C.. |
|||
Tensile Strength at Break | >= 1.03 MPa | >= 150 psi | ASTM D412 |
Parker Chomerics CHO-SEAL® 6372 Graphite Filled Elastomer EMI Gaskets. This extruded nickel-plated graphite filled elastomer addresses EMI shielding and environmental needs for both internal and external applications. It has an excellent performance in sal.. |
|||
Tensile Strength at Break | 1.03 MPa | 150 psi | ASTM D412 |
Teknor Apex Uniprene® UN-1674C Thermoplastic Vulcanizate Notes: Injection Rate: Fast Uses: Expansion Joint; Grommets; Tubing; Gaskets; Plugs; Weatherstripping; Glazing; Shock Absorbing Pads Forms: Pellets Processing Method: Extrusion; Injection Molding Ex.. |
|||
Tensile Strength at Break | 1.03 MPa | 150 psi | ASTM D638 - ISO 527-2 |
DuPont Keldax® 6705B Filled Thermoplastic Ethylene Polymer A filled thermoplastic ethylene polymer that provides acoustical sound barrier performance in automotive, construction, and industrial applications.Processing Method: ExtrusionSheetAvailability: Nor.. |
|||
Tensile Strength at Break | 1.03 - 1.38 MPa | 150 - 200 psi | |
Abatron AboSeal 8104-9 Polysulfide, Thixotropic or Self-Leveling Sealant and Caulk AboSeal 8104-9 is a 2-part, 100% solids, thixotropic or self-leveling polysulfide. It comes in most colors. It has been made to meet Federal Spec. TT-S-00227-E. It is preferred when white or light c.. |
|||
Tensile Strength at Break | 1.03 MPa | 149 psi | ASTM D4325 |
3M Scotch™ 2228 Rubber Mastic Tape 3M™ Scotch™ 2228 is a conformable self-fusing rubber electrical insulating sealing tape. Scotch 2228 consist of an ethylene propylene rubber (EPR) backing coated with an aggressive, temperature-st.. |
|||
Tensile Strength at Break | 1.03 MPa | 150 psi | ASTM D412 |
Teknor Apex Monprene® MP-2854T Thermoplastic Elastomer Uses: Closures; Consumer Applications; Gaskets; Handles; Kitchenware; Medical/Healthcare Applications; Packaging; Safety Equipment; Sporting Goods; Toothbrush Handles; Tubing; Writing Instruments Fo.. |