Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Charpy Impact Unnotched = 2.00 J/cm² Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Mechanical Properties Metric English Comments
Charpy Impact Unnotched 2.00 J/cm²
9.52 ft-lb/in²
ISO 179/1eU
Celanese FORTRON 6165A4 PPS, 65% Mineral / Glass Reinforced  (Unverified Data**)
Fortron 6165A4 offers a unique balance of properties based on a high mineral and glass reinforced composition. The heat resistance under load bearing conditions is excellent for this product. As wit..
Charpy Impact Unnotched 2.00 J/cm²
9.52 ft-lb/in²
ISO 179/1eU
Celanese Celanex® 3200-2 PBT, 15% Glass Reinforced  (Unverified Data**)
Celanex 3200-2 is a general purpose, 15% glass reinforced polybutylene terephthalate with a good balance of mechanical properties and processability. Celanex 3200-2 contains an internal lubricant.15..
Charpy Impact Unnotched 2.00 J/cm²

@Temperature -30.0 °C
9.52 ft-lb/in²

@Temperature -22.0 °F
ISO 179/1eU
Celanese Celanex® 3200-2FC PBT, 15% Glass Reinforced  (Unverified Data**)
Celanex 3200-2FC is a general purpose, 15% glass reinforced polybutylene terephthalate with a good balance of mechanical properties and processability for use in food contact applications. Celanex 3..
Charpy Impact Unnotched 2.00 - 2.50 J/cm²

@Temperature -30.0 - -30.0 °C
9.52 - 11.9 ft-lb/in²

@Temperature -22.0 - -22.0 °F
Average value: 2.25 J/cm² Grade Count:2
Overview of materials for Polyaryletherketone (PAEK), Carbon Fiber Filled
This property data is a summary of similar materials in the MatWeb database for the category "Polyaryletherketone (PAEK), Carbon Fiber Filled". Each property range of values reported is minimum and ..
Charpy Impact Unnotched 2.00 J/cm²
9.52 ft-lb/in²
DIN 53453
Nilit FRIANYL A63 BR80 Nylon 6.6 for injection molding, 80% bronze filled
Nylon 6.6 for injection moldingInformation provided by Frisetta Polymer, which merged into Nilit Plastics
Charpy Impact Unnotched 2.00 J/cm²

@Temperature -40.0 °C
9.52 ft-lb/in²

@Temperature -40.0 °F
DIN 53453
Nilit FRIANYL A63 KV40 Nylon 6.6 for injection molding, 40% glass ball reinforced
Nylon 6.6 for injection molding.Information provided by Frisetta Polymer, which merged into Nilit Plastics
Charpy Impact Unnotched 2.00 J/cm²
9.52 ft-lb/in²
Average value: 2.00 J/cm² Grade Count:3
Overview of materials for Thermoplastic Polyimide, Unfilled
Charpy Impact Unnotched 2.00 J/cm² - NB
9.52 ft-lb/in² - NB
Average value: 5.25 J/cm² Grade Count:44
Overview of materials for Nylon 66, 10% Glass Fiber Filled
This property data is a summary of similar materials in the MatWeb database for the category "Nylon 66, 10% Glass Fiber Filled". Specific grades with glass content between 5% and 14% are included. ..
Charpy Impact Unnotched 2.00 J/cm²

@Temperature -30.0 °C
9.52 ft-lb/in²

@Temperature -22.0 °F
ISO 179
Lehmann & Voss LUVOCOM® 50-7446 Polycarbonate, with carbon fiber, PTFE, lubricant modified
Applications: Data processing machinery, precision engineering, film and photo industry, sporting and leisure goods, medical enineering.High-strength and high-stiff parts; low coefficient of expansi..
Charpy Impact Unnotched 2.00 J/cm²
9.52 ft-lb/in²
ISO 179/1eU
Lucite International Diakon® CMG302 Acrylic Polymer
Information provided by Lucite International
Charpy Impact Unnotched 2.00 J/cm²
9.52 ft-lb/in²
LATI Laticonther 75 CPG/650 PBT, Glass Fiber Reinforced
High thermal conductivity product based on Polybutylene Terephthalate (PBT). Special filler. Glass fibers. Availability: Africa & Middle East; Asia Pacific; Europe; Latin America; North AmericaInfor..
Charpy Impact Unnotched 2.00 J/cm²
9.52 ft-lb/in²
LATI Latigray 82-03 CW/95 PA 12, Metallic Reinforced
Radiopaque compound based on Polyamide 12 (PA12). Metallic filler.Availability: Africa & Middle East; Asia Pacific; Europe; Latin America; North AmericaInformation provided by Lati Industria Termopl..
Charpy Impact Unnotched 2.00 J/cm²
9.52 ft-lb/in²
LATI Latilub 66 Y/20 PA66, Aramid Fiber Reinforced
Self-lubricating product based on Polyamide 66 (PA66). Aramid fibersAvailability: Africa & Middle East; Asia Pacific; Europe; Latin America; North AmericaInformation provided by Lati Industria Termo..
Charpy Impact Unnotched 2.00 J/cm²
9.52 ft-lb/in²
ISO 179
Teijin Multilon DN-1530B Filler Reinforced Type, Halogen-Free Flame Resistant PC/ABS Polymer Alloy
Halogen-free flame retardant PC/ABS polymer alloy, and is also antimony-free. It has improved stiffness through the addition of 30 % filler. Improved stiffness and high fluidity realizes a thin wall..
Charpy Impact Unnotched 2.00 J/cm²
9.52 ft-lb/in²
Edgew 80*10*4 sp=62mm; ISO 179/1eU
SABIC Innovative Plastics NORYL PCN2910 PPE+PS (Asia Pacific)
35% Glass/Mica filled. High modulus and tight tolerance molding for the chassis market.
Charpy Impact Unnotched 2.00 J/cm²

@Temperature -30.0 °C
9.52 ft-lb/in²

@Temperature -22.0 °F
ISO 179/2C
SABIC Innovative Plastics Valox® VX4910 ASA+PBT (Europe-Africa-Middle East)
10% Glass reinforced nucleated PBT/ASA with excellent mechanical properties high dimensional stability, and low density.
Charpy Impact Unnotched 2.00 J/cm²

@Temperature 23.0 °C
9.52 ft-lb/in²

@Temperature 73.4 °F
Edgew 80*10*4 sp=62mm; ISO 179/1eU
SABIC Innovative Plastics LNP Thermocomp RB003 PA 66 (Europe-Africa-Middle East)
15% glass beads filled polyamide 66 injection moulding resinThis data was supplied by SABIC-IP for the Europe-Africa-Middle East region.
Charpy Impact Unnotched 2.00 J/cm²

@Temperature 23.0 °C
9.52 ft-lb/in²

@Temperature 73.4 °F
ISO 179
Evonik Corporation Plexiglas® 8H PMMA Molding Compound
Description: PLEXIGLAS® 7H and PLEXIGLAS® 8H are molding compounds based on polymethyl methacrylate (PMMA). The special properties of these standard PLEXIGLAS® molding compounds are: high melt st..
Charpy Impact Unnotched 2.00 J/cm²
9.52 ft-lb/in²
ISO 179-1eU
Barlog Plastics KEBATRON L1065X3 PPS, linear, 65% glass fiber / mineral reinforced
PPS-GF/MD 65Information provided by BARLOG plastics GmbH.
Charpy Impact Unnotched 2.00 J/cm²

@Temperature -30.0 °C
9.52 ft-lb/in²

@Temperature -22.0 °F
ISO 179/1eU
Celanese CELANEX 3200-2 PBT, 15% Glass Reinforced
Celanex 3200-2 is a general purpose, 15% glass reinforced polybutylene terephthalate with a good balance of mechanical properties and processability. Celanex 3200-2 contains an internal lubricant.In..
Charpy Impact Unnotched 2.00 J/cm²
9.52 ft-lb/in²
ISO 179/1eU
Celanese CELANEX 3200-2FC PBT, 15% Glass Reinforced
Celanex 3200-2FC is a general purpose, 15% glass reinforced polybutylene terephthalate with a good balance of mechanical properties and processability for use in food contact applications. Celanex 3..
Charpy Impact Unnotched 2.00 J/cm²
9.52 ft-lb/in²
ISO 179/1eU
Celanese FORTRON 6165A4 PPS, 65% Mineral / Glass Reinforced
Fortron 6165A4 offers a unique balance of properties based on a high mineral and glass reinforced composition. The heat resistance under load bearing conditions is excellent for this product. As wit..
Charpy Impact Unnotched 2.00 J/cm²
9.52 ft-lb/in²
ISO 179/1eU
Celanese Celanex® 3200HR PBT, 15% Glass Reinforced
Celanex 3200HR is a 15% glass filled polybutylene terephthalate which has an excellent hydrolysis resistance, mechanical properties and processability.To avoid hydrolytic degradation during processi..
Charpy Impact Unnotched 2.00 J/cm²

@Temperature -30.0 °C
9.52 ft-lb/in²

@Temperature -22.0 °F
BASF Procom® T20C 557 Polypropylene
Car interior trim panels.Data was collected by ISO methods and provided by BASF.
Charpy Impact Unnotched 2.00 J/cm²
9.52 ft-lb/in²
Arkema Group Altuglas® 84 L Acrylic-Styrene Copolymer
ALTUGLAS 84 L is a new type of acrylic polymer produced by ATOHAAS which increases the range of material for injection molding applications. ALTUGLAS 84 L is a styrene methylmethacrylate copolymer s..
Charpy Impact Unnotched 2.00 J/cm²
9.52 ft-lb/in²
ISO 179-1
Celanese Coolpoly® D3606 Thermally Conductive Polyamide 4,6  (discontinued **)
CoolPoly D series of thermally conductive plastics transfers heat, a characteristic previously unavailable in injection molding grade polymers. CoolPoly is lightweight, netshape moldable and allows ..
Charpy Impact Unnotched 2.00 - 3.70 J/cm²

@Temperature -30.0 - -30.0 °C
9.52 - 17.6 ft-lb/in²

@Temperature -22.0 - -22.0 °F
Average value: 2.97 J/cm² Grade Count:7
Overview of materials for Polycarbonate, Glass + PTFE Filled
This property data is a summary of similar materials in the MatWeb database for the category "Polycarbonate, Glass + PTFE Filled". Each property range of values reported is minimum and maximum value..
Charpy Impact Unnotched 2.00 J/cm²
9.52 ft-lb/in²
ISO 179/1eU
BASF Ultradur B 4300 G2 High Speed Unc. 10% Glass Filled PBT
Ultradur B 4300 G2 High Speed Unc. is a high flow, fast cycling with low warpage, 10% glass filled, pigmented black, injection molding PBT for industrial parts, rigid tough and dimensional stable ap..
Charpy Impact Unnotched 2.00 J/cm²
9.52 ft-lb/in²
LATI Later 4E61 GCER/450-V0 PBT, Glass/Mineral Filled, Flame Retardant
Polybutylene Terephthalate (PBT) based compound. Toughened. Glass fibers / Mineral filler. UL94 V-0 classified, with brominated flame retardants, PBB/PBDE free. Very good electrical properties.Avail..
Charpy Impact Unnotched 2.00 - 8.00 J/cm²
9.52 - 38.1 ft-lb/in²
Average value: 6.12 J/cm² Grade Count:16
Overview of materials for Polypropylene, Long Glass Fiber 50%
This property data is a summary of similar materials in the MatWeb database for the category "Polypropylene, Long Glass Fiber 50%". Specific grades with glass content between 45% and 54% are include..
Copyright © lookpolymers.com All Rights Reserved