Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Flexural Strength | 110 MPa | 16000 psi | ISO 178 |
Nilit FRIANYL B63 H-KV30 Nylon 6 for injection molding, 30% glass ball reinforced Nylon 6 for injection molding, heat stabilized.Information provided by Frisetta Polymer, which merged into Nilit Plastics |
|||
Flexural Strength | <= 110 MPa | <= 16000 psi | ISO 178 |
Polykemi AB SCANAMID 66 A13^ Q2 EX8 Nylon 66, Mineral Reinforced Information provided by Polykemi AB |
|||
Flexural Strength | 110 MPa | 16000 psi | ISO 178 |
Radici Radiflam® AFR (dry) Nylon 66 PA66 Self-extinguishing without halogens or phosphorousInformation provided by Radici group. |
|||
Flexural Strength | 110 MPa | 16000 psi | ASTM D790 |
Polymer Resources PC/ABS-G10 General Purpose PC/ABS Alloy, 10% Glass Filled PC/ABS Alloy, General Purpose, 10% Glass FilledProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples.Information provi.. |
|||
Flexural Strength | 110 MPa | 16000 psi | ASTM D790 |
Ravago Manufacturing Americas Hylon® N2000HL Nylon 6 (DAM) Information provided by Ravago. |
|||
Flexural Strength | 110 MPa | 16000 psi | ASTM D790 |
PolyOne Edgetek® NY-20GF/10GB/000 Polyamide 6 (Nylon 6) Information provided by PolyOne |
|||
Flexural Strength | 110 MPa | 16000 psi | ASTM D790 |
PolyOne Edgetek® PS-25MN/000 Polybutylene Terephthalate (PBT), Mineral Filled
(discontinued **) Description/Features:Mineral FilledUL 94 HBPolyOne First ChoiceInformation provided by PolyOne Corporation. |
|||
Flexural Strength | 110 MPa | 16000 psi | 1.3 mm/min; ASTM D790 |
PolyOne Edgetek® AS-30GF/000 BLACK Acrylonitrile Butadiene Styrene (ABS) Information provided by PolyOne |
|||
Flexural Strength | 110 MPa | 16000 psi | |
Lehmann & Voss LUVOCOM® 19-8043 Polyamide 46, with PTFE, lubricant modified, high viscosity Applications: Automotive industry, textile- and office machinery, apparatus- and precision engineering.Improved friction and wear behaviour. Emergency running property.Isotropic shrinkage characteri.. |
|||
Flexural Strength | 110 MPa @Temperature 149 °C |
16000 psi @Temperature 300 °F |
|
Greene Tweed Arlon® 2000 Polyketone Arlon® is a tough, high-temperature, semi-crystalline, thermoplastic presenting a unique combination of mechanical, thermal, chemical and electrical properties. Greene, Tweed uses several proprie.. |
|||
Flexural Strength | 110 MPa | 16000 psi | |
Lehmann & Voss LUVOCOM® 1-7139-1 Polyamide 66, with aramid reinforcement and PTFE, heat stabilized Applications: Automotive industry, textile- and office machinery, apparatus- and precision engineering.Emergency running property.Improved heat resistance.Control disks, cams, sliding elements and o.. |
|||
Flexural Strength | 110 MPa | 16000 psi | ISO 178 |
Solvay TECHNYL® B 52 G1 MX 35 (XA 3004) PA66/6 Description: TECHNYL B 52 G1 MX35 is a copolyamide 6.6/6 , with thermal protection, glow wire resistant and reinforced with mineral filler.Colors: GreyAvailable in: Latin AmericaMain Properties: ? G.. |
|||
Flexural Strength | 110 MPa | 16000 psi | 2 mm/min; ISO 178 |
SABIC Innovative Plastics LNP STAT-KON Lexan_JK2500 PC+ABS LNP* Stat-kon* Lexan_JK2500 compound is a 20% carbon-fiber reinforced, nonhalogenated red phosporous-free, high-flow FR PC+ABS for EMI/RFI shielding. SE of 21 dB at 1.5 mm. |
|||
Flexural Strength | 110 MPa | 16000 psi | 2 mm/min; ISO 178 |
Sax Polymers SAXAMID 226 Nylon 6.6 SAXAMID 226 is a general purpose polyamide 6.6 injection-molding-grade. Benefits are short cycle times and good release properties.Information provided by SAX Polymers |
|||
Flexural Strength | 110 MPa | 16000 psi | ASTM D790 |
A. Schulman SCHULAMID® 6 MV5 Unreinforced Nylon 6 Information provided by A. Schulman. |
|||
Flexural Strength | 110 - 130 MPa | 16000 - 18900 psi | At Rupture; ISO 178 |
Vyncolit 4221 XB Novolac Phenolic Mineral and organic filled phenolic molding compound with good mechanical properties.Information provided by Vyncolit, a Sumitomo Bak Group |
|||
Flexural Strength | 110 MPa | 16000 psi | ISO 178 |
Polyram PlusTek PA801 Nylon 6.6 Copolymer for Injection Molding, Impact Modified Impact modified Nylon 6.6 copolymer for injection molding application.Information provided by Polyram. |
|||
Flexural Strength | 110 MPa | 16000 psi | ASTM D790 |
Polyram PlusTek PB702 Nylon 6, UV Stabilized Polyamide 6 UV stabilized for fast cycle injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Flexural Strength | 110 MPa | 16000 psi | ISO 178-93 |
Wellman Wellamid® GF10-66/6-LI6-NBK4 10% Glass Reinforced, Toughened Nylon 66/6 Description: Glass Reinforced, Toughened Nylon 66/6Information provided by Wellman. |
|||
Flexural Strength | 110 MPa | 16000 psi | ASTM D790 |
Polyram PlusTek PB901 Nylon 6, Extruded cable coating Polyamide 6 for very thin electrical extruded cable coatingInformation provided by Polyram Ram On Ind. |
|||
Flexural Strength | 110 MPa | 16000 psi | ISO 178 |
Polyram RamShine PV3003R2 Acrylonitrile Butadiene Styrene, 10% Carbon Fiber 10% Carbon fiber reinforced ABS for injection molding applications.Information provided by Polyram. |
|||
Flexural Strength | 110 MPa | 16000 psi | ISO 178 |
Eurostar Starflam PK0052E PA6, 25% Mineral Filled, Injection Molded PK0052E is a Halogen Free and Red Phosphorous Free, Flame Retardant, Mineral Filed, Polyamide 6 Injection Molding (also known as PM3520Z222 or PA 25E6 U9 Z22)Information provided by Polymer Technolo.. |
|||
Flexural Strength | <= 110 MPa | <= 16000 psi | 3.5% flexure; ISO 178 |
Azoty Tarnow™ Tarnamid® T-27 MK30 Polyamide 6 - Mineral Reinforced 30% Mineral filled, medium viscosity injection molding grade, also used for compounding, for production of monofilament, bristles and fibers.Tarnamid® has the following main properties:High mechani.. |
|||
Flexural Strength | 110 MPa | 16000 psi | ASTM D790 |
A. Schulman ComAlloy Hiloy® 247 SAN, Glass/Mineral Reinforced, UL Data provided by the manufacturer, ComAlloy International Company.40% Glass/Mineral Reinforced.The ComAlloy product line has been integrated into the A Schulman product line. |
|||
Flexural Strength | 110 - 138 MPa | 16000 - 20000 psi | |
Bulk Molding Compounds BMC 5436 Mineral Filled, Glass Reinforced Polyester BMC 5436 molding compound is a low cost, mineral filled, glass-fiber-reinforced polyester compound suitable for compression, transfer and stuffer injection molding. It is characterized by good molda.. |
|||
Flexural Strength | 110 - 138 MPa | 16000 - 20000 psi | |
Bulk Molding Compounds BMC 2274 Mineral Filled, Glass Reinforced Polyester BMC 2274 molding compound is a mineral filled, glass-fiber-reinforced polyester compound suitable for compression transfer and stuffer injection molding. It is a general-purpose material with medium.. |
|||
Flexural Strength | 110 - 130 MPa | 16000 - 18900 psi | Injection; ISO 178 |
Raschig Group 5557 DAP
(discontinued **) Glass fiber-reinforced and inorganically filled diallylphthalate molding compound (DAP) in various colors. Good mechanical strength together with retention of high electrical properties under hot h.. |