Physical Properties | Metric | English | Comments |
---|---|---|---|
High Load Melt Index | 8.5 g/10 min @Load 21.6 kg, Temperature 190 °C |
8.5 g/10 min @Load 47.6 lb, Temperature 374 °F |
ASTM D1238 |
Ineos TUB 121N HDPE TUB121N is a natural high density bimodal polyethylene copolymer designed for extrusion of potable water, natural gas, industrial, and mining pipe. When blended with an approved black concentrate, t.. |
|||
High Load Melt Index | 8.5 g/10 min @Load 21.6 kg, Temperature 190 °C |
8.5 g/10 min @Load 47.6 lb, Temperature 374 °F |
ISO 1133 |
Borealis BorPEX™ HE2590 High Density Polyethylene Compound for Crosslinked Pipes (Pex-C (Irradiation)) BorPEX HE2590 is a high molecular weight, high density polyethylene compound for crosslinkable pipes, especially designed for electron beam irradiation crosslinking. The stabilization is optimized .. |
|||
High Load Melt Index | 8.5 g/10 min @Load 21.6 kg, Temperature 190 °C |
8.5 g/10 min @Load 47.6 lb, Temperature 374 °F |
Condition F; ASTM D1238 |
Formosa Plastics Formolene® E900 Pipe HDPE High Density Polyethylene High Molecular Weight Bi-Modal Resin for Non-Pressure Pipe Extrusion Applications Formolene® E900 is a high molecular weight high density polyethylene (HMW-HDPE) resin des.. |
|||
High Load Melt Index | 8.5 g/10 min @Load 21.6 kg, Temperature 190 °C |
8.5 g/10 min @Load 47.6 lb, Temperature 374 °F |
Condition F; ASTM D1238 |
Formosa Plastics Formolene® E924 Film HDPE High Molecular Weight High Density Polyethylene (HMW-HDPE) for Film Extrusion Formolene® E924 is a bi-modal HMW-HDPE resin designed for high dart impact strength and good processing characteristics.. |
|||
High Load Melt Index | 8.5 g/10 min @Load 21.6 kg, Temperature 190 °C |
8.5 g/10 min @Load 47.6 lb, Temperature 374 °F |
ASTM D1238 |
Dow CONTINUUM™ DGDC-2480 NT Bimodal Polyethylene Resin CONTINUUM™ DGDA-2490 NT is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long term hydrostatic strength combined with outstanding resistan.. |
|||
High Load Melt Index | 8.5 g/10 min @Load 21.6 kg, Temperature 190 °C |
8.5 g/10 min @Load 47.6 lb, Temperature 374 °F |
Condition F; ASTM D1238 |
Formosa Plastics Formolene® E924F Film HDPE High Density Polyethylene High Molecular Weight Bi-Modal Resin for Film Applications Formolene® E924F is a “low gel” high molecular weight grade of HDPE designed for high dart impact strength and.. |
|||
High Load Melt Index | 8.5 g/10 min @Load 21.6 kg, Temperature 190 °C |
8.5 g/10 min @Load 47.6 lb, Temperature 374 °F |
ASTM D1238 |
Braskem HF 0147 HDPE Blown Film Extrusion Polyethylene 38µm film gauge, obtained in 75mm extruder, die gap 1.0mm, output 1.75 kg/h-cm with 2:1 BUR. Applications: Grocery and T-shirt bags; merchandise bags; frozen-food bags. Information provided by Bras.. |