Physical Properties | Metric | English | Comments |
---|---|---|---|
Melt Flow | 6.3 g/10 min | 6.3 g/10 min | Condition 230/3.8; ASTM D1238 |
Plaskolite Optix® CA-924 Impact Modified Acrylic Resin Injection Molding Grade Pellets. Good impact strength. |
|||
Melt Flow | 6.3 g/10 min | 6.3 g/10 min | Condition 230/3.8; ASTM D1238 |
Plaskolite West Optix® CA-924 Impact Modified Acrylic Resin Injection Molding Grade Pellets. Good impact strength. |
|||
Melt Flow | 6.3 g/10 min @Load 2.16 kg, Temperature 260 °C |
6.3 g/10 min @Load 4.76 lb, Temperature 500 °F |
ASTM D1238 |
SABIC Innovative Plastics Cycoloy® CH6410 PC+ABS (Asia Pacific) CH6410 is a high heat, impact modified PC resin, with nonbrominated, nonchlorinated flame retardant system. Limited colors only. |
|||
Melt Flow | 6.3 g/10 min @Load 2.16 kg, Temperature 260 °C |
6.3 g/10 min @Load 4.76 lb, Temperature 500 °F |
ASTM D1238 |
SABIC Innovative Plastics Cycoloy® RCY6713 PC (Asia Pacific) Cycoloy* RCY6713 resin is an injection moldable high heat PC blend with non-brominated and non-chlorinated flame retardant. It contains 30% post consumer recycle content with a UL-94 V0 rating @ 1.5.. |
|||
Melt Flow | 6.3 g/10 min @Load 3.80 kg, Temperature 230 °C |
6.3 g/10 min @Load 8.38 lb, Temperature 446 °F |
ASTM D-1238 |
Plaskolite Optix® CP - 924 High Impact Grade Acrylic Resin OPTIX® impact-modified grades offer 7 to 10 times the impact resistance of general purpose polymers while maintaining optical clarity.Information provided by Plaskolite, Inc. |
|||
Melt Flow | 6.3 g/10 min @Load 3.80 kg, Temperature 230 °C |
6.3 g/10 min @Load 8.38 lb, Temperature 446 °F |
ASTM D-1238 |
Plaskolite West Optix® CP - 924 High Impact Acrylic Resin Optix® impact-modified grades exhibit 7 to 10 times the impact strength of general purpose grades and maintaining the superior optical properties. Each grade is offered in a grade(G) that resists g.. |
|||
Melt Flow | 6.3 g/10 min | 6.3 g/10 min | ASTM D1238 |
ExxonMobil LD 513.48 Molding, Extrusion and Compounding Resin
(discontinued **) LD 513.48 is a medium MI, low density polyethylene resin designed for use in compounds and masterbatches where its properties ensure improved processability and uniform dispersion of additives. The.. |
|||
Melt Flow | 6.3 g/10 min @Load 6.60 kg, Temperature 337 °C |
6.3 g/10 min @Load 14.6 lb, Temperature 639 °F |
ASTM D1238 |
Global GPEI-210 10% Glass Filled Reinforced, Polyetherimide Information provided by Global Polymers Corporation. |
|||
Melt Flow | 6.3 g/10 min @Load 10.0 kg, Temperature 220 °C |
6.3 g/10 min @Load 22.0 lb, Temperature 428 °F |
ISO 1133 |
Styrolution Terluran® HH-112 Q109 ABS Description: Injection-molding grade with highest heat resistance, high rigidity and medium impact strength.Information provided by STYROLUTION, which is a joint venture between BASF and INEOS |
|||
Melt Flow | 6.3 g/10 min @Load 10.0 kg, Temperature 220 °C |
6.3 g/10 min @Load 22.0 lb, Temperature 428 °F |
ISO 1133 |
Styrolution Terluran® HH-112 Q42 Gray 10072 ABS Description: Injection-molding grade with highest heat resistance, high rigidity and medium impact strength.Information provided by STYROLUTION, which is a joint venture between BASF and INEOS |
|||
Melt Flow | 6.3 g/10 min @Load 2.16 kg, Temperature 190 °C |
6.3 g/10 min @Load 4.76 lb, Temperature 374 °F |
ISO 1133 |
Azoty Tarnow™ TARNOFORM 300 GF3 POM 15% glass fiber reinforced injection molding grade, suitable for applications where increased strength and stiffness is required.Information provided by Zakłady Azotowe w Tarnowie-Moscicach S.A... |
|||
Melt Flow | 6.3 g/10 min @Load 1.20 kg, Temperature 300 °C |
6.3 g/10 min @Load 2.65 lb, Temperature 572 °F |
ASTM D1238 |
Amco Amalloy® B9714 Polymer Alloy Amco Amalloy B9714 is a clear performance copolymer with exceptional clarity and toughness.High elongation before breakage, good melt Flow.Information provided by Amco Plastic Materials. |
|||
Melt Flow | 6.3 g/10 min @Load 2.16 kg, Temperature 260 °C |
6.3 g/10 min @Load 4.76 lb, Temperature 500 °F |
ASTM D1238 |
SABIC Innovative Plastics Cycoloy® CH6410 PC+ABS CH6410 is a high heat, impact modified PC resin, with nonbrominated, nonchlorinated flame retardant system. Limited colors only. |