Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Styrolution Terluran® HH-112 Q109 ABS

Category Polymer , Thermoplastic , ABS Polymer
Manufacturer Styrolution
Trade Name Terluran®
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Styrolution Terluran® HH-112 Q109 ABS.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Description: Injection-molding grade with highest heat resistance, high rigidity and medium impact strength.Information provided by STYROLUTION, which is a joint venture between BASF and INEOS
Physical Properties Metric English Comments
Density 1.05 g/cc
0.0379 lb/in³
ISO 1183
Linear Mold Shrinkage, Flow 0.0040 - 0.0070 cm/cm
0.0040 - 0.0070 in/in
Melt Flow 6.3 g/10 min

@Load 10.0 kg,
Temperature 220 °C
6.3 g/10 min

@Load 22.0 lb,
Temperature 428 °F
ISO 1133
Mechanical Properties Metric English Comments
Ball Indentation Hardness 114 MPa

@Load 36.5 kg,
Time 30.0 sec
16500 psi

@Load 80.5 lb,
Time 0.00833 hour
ISO 2039-1
Tensile Strength, Yield 58.0 MPa
8410 psi
50mm/min; ISO 527-1/-2
Elongation at Break 8.0 %
8.0 %
Nominal; ISO 527-1/-2
Elongation at Yield 3.1 %
3.1 %
50mm/min; ISO 527-1/-2
Tensile Modulus 2.70 GPa
392 ksi
ISO 527-1/-2
Flexural Strength 81.0 MPa
11700 psi
ISO 178
Izod Impact, Notched 1.10 J/cm
2.06 ft-lb/in
ASTM D256
Izod Impact, Notched (ISO) 5.00 kJ/m²

@Temperature -30.0 °C
2.38 ft-lb/in²

@Temperature -22.0 °F
ISO 180/A
12.0 kJ/m²

@Temperature 23.0 °C
5.71 ft-lb/in²

@Temperature 73.4 °F
ISO 180/A
Charpy Impact Unnotched 8.00 J/cm²

@Temperature -30.0 °C
38.1 ft-lb/in²

@Temperature -22.0 °F
ISO 179/1eU
14.0 J/cm²

@Temperature 23.0 °C
66.6 ft-lb/in²

@Temperature 73.4 °F
ISO 179/1eU
Charpy Impact, Notched 0.500 J/cm²

@Temperature -30.0 °C
2.38 ft-lb/in²

@Temperature -22.0 °F
ISO 179/1eA
1.20 J/cm²

@Temperature 23.0 °C
5.71 ft-lb/in²

@Temperature 73.4 °F
ISO 179/1eA
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow 70.0 - 110 µm/m-°C

@Temperature 23.0 - 80.0 °C
38.9 - 61.1 µin/in-°F

@Temperature 73.4 - 176 °F
ISO 11359-1/-2
Thermal Conductivity 0.170 W/m-K
1.18 BTU-in/hr-ft²-°F
DIN 52612-1
Maximum Service Temperature, Air 90.0 °C
194 °F
Deflection Temperature at 0.46 MPa (66 psi) 113 °C
235 °F
ISO 75
Deflection Temperature at 1.8 MPa (264 psi) 109 °C
228 °F
ISO 75
Vicat Softening Point 112 °C
234 °F
VST/B/50; ISO 306
118 °C
244 °F
VST/A/50; ISO 306
Flammability, UL94 HB

@Thickness 1.60 mm
HB

@Thickness 0.0630 in
IEC 60695-11-10
Electrical Properties Metric English Comments
Volume Resistivity 1.00e+13 ohm-cm
1.00e+13 ohm-cm
IEC 60093
Dielectric Strength 41.0 kV/mm
1040 kV/in
K20/P50; IEC 60243-1
Processing Properties Metric English Comments
Melt Temperature 230 - 270 °C
446 - 518 °F
Injection Molding
Mold Temperature 30.0 - 60.0 °C
86.0 - 140 °F
Injection Molding
Drying Temperature 80.0 °C
176 °F
Pre-drying
Dry Time 2 - 4 hour
2 - 4 hour
Pre-drying
Descriptive Properties Value Comments
Commercial Status Europe
Primary Processing Technique Injection Molding
Copyright © lookpolymers.com All Rights Reserved