- HOME
- POLYMER SEARCH
- Polymer Property : Melt Flow = 6.00 g/10 min
Polymer Property : Melt Flow = 6.00 g/10 min Product List
Physical PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Flow | 6.00 g/10 min @Load 1.20 kg, Temperature 300 °C |
6.00 g/10 min @Load 2.65 lb, Temperature 572 °F |
ASTM D123 |
| Niche Polymer PCM6BK PC Information provided by Niche Polymer |
|||
| Melt Flow | 6.00 g/10 min | 6.00 g/10 min | ASTM D123 |
| Niche Polymer PPHM6BK Homopolymer PP Information provided by Niche Polymer |
|||
| Melt Flow | 6.00 - 60.0 g/10 min | 6.00 - 60.0 g/10 min | Average value: 24.2 g/10 min Grade Count:13 |
| Overview of materials for Polystyrene + Polyphenylene Ether, Unreinforced This property data is a summary of similar materials in the MatWeb database for the category "Polystyrene + Polyphenylene Ether, Unreinforced". Each property range of values reported is minimum and .. |
|||
| Melt Flow | 6.00 - 60.0 g/10 min | 6.00 - 60.0 g/10 min | Average value: 15.6 g/10 min Grade Count:35 |
| Overview of materials for Polycarbonate, Optical Grade This property data is a summary of similar materials in the MatWeb database for the category "Polycarbonate, Optical Grade". Each property range of values reported is minimum and maximum values of a.. |
|||
| Melt Flow | 6.00 g/10 min @Load 2.16 kg, Temperature 150 °C |
6.00 g/10 min @Load 4.76 lb, Temperature 302 °F |
ASTM D1238 |
| Teknor Apex Monprene® MP 1869 Thermoplastic Elastomer Features: Monprene® TPE gels are softer than the shore A range of hardness. Monprene® TPE gels are high strength and high flow elastomers that may be used in the overmolding processes on poly.. |
|||
| Melt Flow | 6.00 g/10 min @Load 5.00 kg, Temperature 200 °C |
6.00 g/10 min @Load 11.0 lb, Temperature 392 °F |
ASTM D1238 |
| Teknor Apex Monprene® MP-1878B Thermoplastic Elastomer Uses: Closures; Consumer Applications; Gaskets; Handles; Kitchenware; Medical/Healthcare Applications; Packaging; Safety Equipment; Sporting Goods; Toothbrush Handles; Tubing; Writing Instruments Fo.. |
|||
| Melt Flow | 6.00 g/10 min @Load 2.16 kg, Temperature 190 °C |
6.00 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
| Teknor Apex Monprene® MP-1883-L2 Thermoplastic Elastomer Uses: Closures; Consumer Applications; Gaskets; Handles; Kitchenware; Medical/Healthcare Applications; Packaging; Safety Equipment; Sporting Goods; Toothbrush Handles; Tubing; Writing Instruments Fo.. |
|||
| Melt Flow | 6.00 g/10 min @Load 2.16 kg, Temperature 190 °C |
6.00 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
| Teknor Apex Monprene® MP-1383B Thermoplastic Elastomer Uses: Closures; Consumer Applications; Gaskets; Handles; Kitchenware; Medical/Healthcare Applications; Packaging; Safety Equipment; Sporting Goods; Toothbrush Handles; Tubing; Writing Instruments Fo.. |
|||
| Melt Flow | 6.00 g/10 min @Load 5.00 kg, Temperature 200 °C |
6.00 g/10 min @Load 11.0 lb, Temperature 392 °F |
ASTM D1238 |
| Teknor Apex Monprene® MP-2750L1 Thermoplastic Elastomer Uses: Closures; Consumer Applications; Gaskets; Handles; Kitchenware; Medical/Healthcare Applications; Packaging; Safety Equipment; Sporting Goods; Toothbrush Handles; Tubing; Writing Instruments Fo.. |
|||
| Melt Flow | 6.00 g/10 min @Load 2.16 kg, Temperature 230 °C |
6.00 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
| Teknor Apex Sinpolene GPP1640 Polypropylene Availability: Africa & Middle East; Latin America; Asia Pacific; South America Additive: Glass Fiber Reinforcement, 40% Filler by Weight Features: Good Dimensional Stability; High Heat Resistance; .. |
|||
| Melt Flow | 6.00 g/10 min @Load 2.16 kg, Temperature 230 °C |
6.00 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
| Teknor Apex Telcar® TL-1081A Thermoplastic Elastomer Uses: Automotive Applications; Automotive Exterior Parts; Automotive Exterior Trim; Automotive Interior Parts; Blow Molding Applications; General Purpose; Grommets; Weatherstripping Forms: Pellets P.. |
|||
| Melt Flow | 6.00 g/10 min @Load 2.16 kg, Temperature 230 °C |
6.00 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
| Teknor Apex Telcar® TL-2454A Thermoplastic Elastomer Uses: Automotive Applications; Automotive Exterior Parts; Automotive Exterior Trim; Automotive Interior Parts; Blow Molding Applications; General Purpose; Grommets; Weatherstripping Forms: Pellets .. |
|||
| Melt Flow | 6.00 g/10 min @Load 2.16 kg, Temperature 230 °C |
6.00 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
| Teknor Apex Telcar® TL-3260-1 Thermoplastic Elastomer Uses: Automotive Applications; Automotive Exterior Parts; Automotive Exterior Trim; Automotive Interior Parts; Blow Molding Applications; General Purpose; Grommets; Weatherstripping Forms: Pellets .. |
|||
| Melt Flow | 6.00 g/10 min @Load 2.16 kg, Temperature 230 °C |
6.00 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
| Teknor Apex Uniprene® UN-2420D Thermoplastic Vulcanizate Notes: Injection Rate: Fast Uses: Expansion Joint; Grommets; Tubing; Gaskets; Plugs; Weatherstripping; Glazing; Shock Absorbing Pads Forms: Pellets Processing Method: Extrusion; Injection Molding Ex.. |
|||
| Melt Flow | 6.00 g/10 min @Load 2.16 kg, Temperature 190 °C |
6.00 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
| ExxonMobil OPTEMA™ TC 120 ExCo Ethylene Methyl Acrylate Product Description: Optema TC 120 is an ethylene methyl acrylate copolymer intended for extrusion coating, coextrusion coating and extrusion lamination where good interlayer adhesion between polyet.. |
|||
| Melt Flow | 6.00 g/10 min @Load 2.16 kg, Temperature 190 °C |
6.00 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
| ExxonMobil OPTEMA™ TC 120 Molding Ethylene Methyl Acrylate Product Description: Optema TC 120 is an ethylene methyl acrylate copolymer, which can be used as an impact modifier or compatibilizer in polymer compounds. TC 120 has been processed on typical LDPE.. |
|||
| Melt Flow | 6.00 g/10 min @Load 10.0 kg, Temperature 220 °C |
6.00 g/10 min @Load 22.0 lb, Temperature 428 °F |
ASTM D1238 |
| Bhansali Engineering Abstron KU660 ABS Heat Resistant Ultra Super High heat ResistantInformation provided by Bhansali |
|||
| Melt Flow | 6.00 g/10 min @Load 10.0 kg, Temperature 220 °C |
6.00 g/10 min @Load 22.0 lb, Temperature 428 °F |
ASTM D1238 |
| Bhansali Engineering Abstron KU660 ABS Heat Resistant Ultra Super High heat ResistantInformation provided by Bhansali |
|||
| Melt Flow | 6.00 - 44.8 g/10 min | 6.00 - 44.8 g/10 min | Average value: 20.2 g/10 min Grade Count:9 |
| Overview of materials for Acrylonitrile Butadiene Styrene (ABS)/Nylon Blend, Glass Reinforced This property data is a summary of similar materials in the MatWeb database for the category "Acrylonitrile Butadiene Styrene (ABS)/Nylon Blend, Glass Reinforced". Each property range of values repo.. |
|||
| Melt Flow | 6.00 - 13.0 g/10 min | 6.00 - 13.0 g/10 min | Average value: 8.80 g/10 min Grade Count:5 |
| Overview of materials for Acetal Homopolymer, PTFE-Filled This property data is a summary of similar materials in the MatWeb database for the category "Acetal Homopolymer, PTFE-Filled". Each property range of values reported is minimum and maximum values o.. |
|||
| Melt Flow | 6.00 - 43.5 g/10 min | 6.00 - 43.5 g/10 min | Average value: 26.2 g/10 min Grade Count:3 |
| Overview of materials for Polyethersulfone (PES), 20% Glass Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Polyethersulfone (PES), 20% Glass Fiber Filled". Each property range of values reported is minimum and m.. |
|||
| Melt Flow | 6.00 g/10 min @Load 10.0 kg, Temperature 220 °C |
6.00 g/10 min @Load 22.0 lb, Temperature 428 °F |
ASTM D1238 |
| Bhansali Engineering Abstron KU602M ABS Heat Resistant High rigidityInformation provided by Bhansali |
|||
| Melt Flow | 6.00 - 20.0 g/10 min | 6.00 - 20.0 g/10 min | Average value: 12.1 g/10 min Grade Count:4 |
| Overview of materials for Polyethylene Terephthalate (PET), 40% Glass Reinforced This property data is a summary of similar materials in the MatWeb database for the category "Polyethylene Terephthalate (PET), 40% Glass Reinforced". Specific grades with glass content between 35% .. |
|||
| Melt Flow | 6.00 g/10 min @Load 5.00 kg, Temperature 200 °C |
6.00 g/10 min @Load 11.0 lb, Temperature 392 °F |
ASTM D1238 |
| Teknor Apex Monprene® MP-2750 Thermoplastic Elastomer Uses: Closures; Consumer Applications; Gaskets; Handles; Kitchenware; Medical/Healthcare Applications; Packaging; Safety Equipment; Sporting Goods; Toothbrush Handles; Tubing; Writing Instruments Fo.. |
|||
| Melt Flow | 6.00 g/10 min @Load 2.16 kg, Temperature 230 °C |
6.00 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
| Teknor Apex Sinpolene CPP1040 Polypropylene Availability: Africa & Middle East; Latin America; Asia Pacific; South America Calcium Carbonate Filler, 40% Filler by Weight Features: Homopolymer Uses: Appliance Components; Furniture; Housings F.. |
|||
Copyright © lookpolymers.com All Rights Reserved