Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Melt Flow = 16 g/10 min Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Physical Properties Metric English Comments
Melt Flow 16 g/10 min
16 g/10 min
(Condition L) ASTM D-1238-94a
Multibase Multi-Flex® TPO D-5016
Multi-Flex® D-5016 is an elastomer modified polypropylene for applications requiring elastomeric properties and good molding behavior.Data provided by Multibase.
Melt Flow 16 g/10 min

@Load 2.16 kg,
Temperature 260 °C
16 g/10 min

@Load 4.76 lb,
Temperature 500 °F
ASTM D1238
SABIC Innovative Plastics Cycoloy® CX7240U PC+ABS
Cycoloy* CX7240U resin is an injection moldable PC/ABS blend with a UV stabilization package. It contains non-brominated and non-chlorinated flame retardant systems to meet thin wall flame resistanc..
Melt Flow 16 g/10 min

@Load 1.20 kg,
Temperature 300 °C
16 g/10 min

@Load 2.65 lb,
Temperature 572 °F
[cm^3/10 min] Melt Volume Rate; ISO 1133
SABIC Innovative Plastics Lexan® 910A PC (Europe-Africa-Middle East)
LEXAN 910A is a low viscosity flame retardant grade, intended for electrical applications.This data was supplied by SABIC-IP for the Europe-Africa-Middle East region.
Melt Flow 16 g/10 min
16 g/10 min
Condition I; ASTM D1238
Plaskolite Optix® PL-150 Acrylic Resin  (discontinued **)
Injection/extrusion pellets.Data provided by the manufacturer, Plaskolite, Inc.
Melt Flow 16 g/10 min

@Load 10.0 kg,
Temperature 220 °C
16 g/10 min

@Load 22.0 lb,
Temperature 428 °F
Estimated using room temperature density
Ineos ABS Lustran® H607AS
Contains antistatic additives,Property data per ISO test methods.
Melt Flow 16 g/10 min

@Load 2.16 kg,
Temperature 230 °C
16 g/10 min

@Load 4.76 lb,
Temperature 446 °F
ASTM D1238
LG Chemical SEETEC M1500 Polypropylene Impact Copolymer
SEETEC M1500 is a heterophasic polypropylene copolymer for injection molding applications. SEETEC M1500 exhibits a high flowability and a good balance of stiffness and impact strength. SEETEC M1500 ..
Melt Flow 16 g/10 min

@Load 2.16 kg,
Temperature 230 °C
16 g/10 min

@Load 4.76 lb,
Temperature 446 °F
Condition L; ASTM D1238
LyondellBasell Hostacomâ„¢ TRC704D Thermoplastic Polyolefin Elastomer
Description: Hostacomâ„¢ TRC704D medium high melt flow, 1,500 MPa flexural modulus, UV-stabilized thermoplastic elastomeric olefin (TEO) resin has an excellent combination of properties and proce..
Melt Flow 16 g/10 min

@Load 6.60 kg,
Temperature 337 °C
16 g/10 min

@Load 14.6 lb,
Temperature 639 °F
ASTM D1238
SABIC Innovative Plastics ULTEM 1110 PEI (Asia Pacific)
Enhanced flow Polyetherimide (Tg 217C). ECO Conforming.
Melt Flow 16 g/10 min

@Load 6.60 kg,
Temperature 337 °C
16 g/10 min

@Load 14.6 lb,
Temperature 639 °F
ASTM D 1238
SABIC Innovative Plastics Ultem MD131A PEI (Europe-Africa-Middle East)
Transparent, enhanced flow Polyetherimide (Tg 217C). US FDA and EU Food Contact compliant.This data was supplied by SABIC-IP for the Europe-Africa-Middle East region.
Melt Flow 16 g/10 min

@Load 2.16 kg,
Temperature 380 °C
16 g/10 min

@Load 4.76 lb,
Temperature 716 °F
ASTM D1238
Solvay Specialty Polymers Radel® R-7400 Polyphenylsulfone (PPSU)
Radel® R-7300 (for light colors) and R-7400 (for darker colors) polyphenylsulfone resins were developed specifically for aircraft interior applications, and through the use of a proprietary flame..
Melt Flow 16 g/10 min

@Load 1.20 kg,
Temperature 300 °C
16 g/10 min

@Load 2.65 lb,
Temperature 572 °F
ASTM D1238
Star Plastics PC1510R Molding Grade PC with Release
Information provided by Star Plastics, Inc.
Melt Flow 16 g/10 min

@Load 10.0 kg,
Temperature 250 °C
16 g/10 min

@Load 22.0 lb,
Temperature 482 °F
ASTM D1238
Samsung Cheil Industries Starex® SR-7300 ABS/PET, Unreinforced
Material with superior chemical resistance that can be used in the interior/exterior material of household appliances that require heat resistanceInformation provided by Samsung Cheil Industries.
Melt Flow 16 g/10 min

@Load 2.16 kg,
Temperature 260 °C
16 g/10 min

@Load 4.76 lb,
Temperature 500 °F
ASTM D1238
Samyang Triloy® 210NH PC/ABS alloy, Flame Retardant
Non-halogenCharacteristics:Impact resistantHeat resistantFlame retardantDimensional stabilityProcessabilityApplications:Cellular phoneMonitor housingCoffee makerHair dryerO/A partAll information pro..
Melt Flow 16 g/10 min

@Load 5.00 kg,
Temperature 280 °C
16 g/10 min

@Load 11.0 lb,
Temperature 536 °F
ASTM D1238
SABIC Innovative Plastics NORYL GTX GTX985 PPE+PA66 (Asia Pacific)
NORYL GTX985 is a 18% mineral filled material. This material combines high stiffness and excellent temperature resistance with conductivity for electrostatic painting.
Melt Flow 16 g/10 min

@Load 5.00 kg,
Temperature 280 °C
16 g/10 min

@Load 11.0 lb,
Temperature 536 °F
ASTM D1238
SABIC Innovative Plastics NORYL GTX GTX989 PPE+PA
NORYL GTX989 is a conductive and high heat material, especially designed for in- and on-line painted bodypanels and fenders in particular. This material combines impact performance with conductivity..
Melt Flow 16 g/10 min

@Load 1.20 kg,
Temperature 266 °C
16 g/10 min

@Load 2.65 lb,
Temperature 511 °F
ASTM D1238
SABIC Innovative Plastics Valox® 815F PBT+PET (Asia Pacific)
PBT+PET, 15% Glass, Mold Release, Heat Stabilized, For food contact applications
Melt Flow 16 g/10 min

@Load 2.16 kg,
Temperature 190 °C
16 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ASTM D1238
A. Schulman POLYBATCH™ Blue 4020 Concentrate Based In Polyethylene
DescriptionPOLYBATCH® Blue 4020 is a blue color concentrate based in polyethylene. This concentrate was designed to provide intense blue color in polyolefin film and molding applications. POLYBA..
Melt Flow 16 - 24 g/10 min

@Temperature 230 °C
16 - 24 g/10 min

@Temperature 446 °F
Condition L; ASTM D1238
A. Schulman POLYFORT™ PP 1579 Impact Grade Polypropylene
DescriptionPolyfort® PP 1579H is an impact grade of polypropylene for use in parts which require good impact and good appearance in light-weight injection molded parts. Information provided by A. ..
Melt Flow 16 g/10 min
16 g/10 min
ASTM D1238
Tipco Tipcolene® HR 8234 - 10% Talc/Mineral Reinforced Polypropylene Copolymer, Very High Impact Strength & Flow
10% Mineral Reinforced, Very High Impact PP CopolymerApplications: Automotive BumpersProcessing: Injection MoldingInformation provided by the Manufacturer, Tipco Industries Ltd., India.
Melt Flow 16 - 24 g/10 min

@Temperature 230 °C
16 - 24 g/10 min

@Temperature 446 °F
Condition L; ASTM D1238
A. Schulman POLYFORT™ PP 1498HU UV Stabilized, Medium Impact Copolymer Polypropylene
DescriptionPolyfort® PP 1498HU is a high flow UV stabilized medium impact copolymer polypropylene. It molds easily at low temperatures, pressures and mold cycle times. Information provided by A. ..
Melt Flow 16 g/10 min

@Load 2.16 kg,
Temperature 190 °C
16 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ASTM D1238
A. Schulman POLYBATCH™ Blue 4020 Concentrate Based In Polyethylene
DescriptionPOLYBATCH® Blue 4020 is a blue color concentrate based in polyethylene. This concentrate was designed to provide intense blue color in polyolefin film and molding applications. POLYBA..
Melt Flow 16 g/10 min

@Load 2.16 kg,
Temperature 190 °C
16 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ASTM D1238
A. Schulman POLYBATCH™ Poly Off-White P90062PF Concentrate Based In Polypropylene
DescriptionPOLYBATCH® P90062PF is an off-white color concentrate based in polypropylene. This concentrate was designed to provide color polypropylene film, extrusion, and molding applications. PO..
Melt Flow 16 g/10 min

@Load 2.16 kg,
Temperature 190 °C
16 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ASTM D1238
A. Schulman POLYBATCH™ Yellow 2450E Concentrate Based In Polyethylene
DescriptionPOLYBATCH® 2450E is a yellow color concentrate base in polyethylene. This concentrate was designed to provide color in polyolefin film and molding applications. POLYBATCH® 2450E is he..
Melt Flow 16 g/10 min

@Load 2.16 kg,
Temperature 190 °C
16 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ASTM D1238
A. Schulman POLYBATCH™ Red 5670 Concentrate Based In Polyethylene
DescriptionPOLYBATCH® 5670 is a red color concentrate based in polyethylene. This concentrate was designed to provide opacity and color in polyolefin film and molding applications. POLYBATCH® 56..
Melt Flow 16 g/10 min

@Load 5.00 kg,
Temperature 280 °C
16 g/10 min

@Load 11.0 lb,
Temperature 536 °F
cm³/10min; ISO 1133
DuPont Performance Polymers Rynite® RE5264 NC010 Polyethylene Terephthalate (PET)  (Unverified Data**)
36% Glass Reinforced Polyethylene Terephthalate Rynite RE5264 NC010 is a 36% glass fiber reinforced color stabilized modified polyethylene terephthalate.Information provided by DuPont Performance Po..
Melt Flow 16 g/10 min

@Load 1.20 kg,
Temperature 300 °C
16 g/10 min

@Load 2.65 lb,
Temperature 572 °F
ASTM D1238
Diamond Polymers PC-1500F Clear, Natural Polycarbonate
Information Provided by Diamond Polymers, Inc. & Network Polymers, Inc.
Melt Flow 16 g/10 min
16 g/10 min
ISO 1133
Addiplast Addilene H 560 Polypropylene Homopolymer
High heat resistance, detergent stabilized, anti-yellowingInformation provided by Addiplast.
Melt Flow 16 g/10 min

@Load 2.16 kg,
Temperature 190 °C
16 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ASTM D1238
A. Schulman POLYBATCH™ Gardenia P80515PF Concentrate Based In Polypropylene
DescriptionPOLYBATCH® P80515PF is a color matched white color concentrate based in polypropylene. This concentrate was designed to provide opacity and color in polypropylene film, extrusion, and m..
Melt Flow 16 g/10 min

@Load 1.20 kg,
Temperature 300 °C
16 g/10 min

@Load 2.65 lb,
Temperature 572 °F
[cm^3/10 min] Melt Volume Rate; ISO 1133
SABIC Innovative Plastics Lexan® ML6240 PC Copolymer (Europe-Africa-Middle East)
Low viscosity PC copolymer blend with enhanced UV stabilization and added release agent. Available in transparent and tinted colorsThis data was supplied by SABIC-IP for the Europe-Africa-Middle Eas..
Melt Flow 16 g/10 min

@Load 10.0 kg,
Temperature 220 °C
16 g/10 min

@Load 22.0 lb,
Temperature 428 °F
ASTM D-1238
Bhansali Engineering Abstron IMGS20 Glass Reinforced Grade
Glass Reinforced ABS & SAN Resins for product specific requirement of very high rigidity and temperatureInformation provided by Bhansali
Copyright © lookpolymers.com All Rights Reserved