Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.15 g/cc | 0.0415 lb/in³ | ASTM D-792 |
Plaskolite West Optix® CA - 927 High Impact Acrylic Resin Optix® impact-modified grades exhibit 7 to 10 times the impact strength of general purpose grades and maintaining the superior optical properties. Each grade is offered in a grade(G) that resists g.. |
|||
Density | 1.15 g/cc | 0.0415 lb/in³ | ISO 1183 |
SABIC Innovative Plastics Cycoloy® C3100 PC+ABS (Europe-Africa-Middle East) C3100 is blow moulding/extrusion grade offering low temperature ductility, high heat resistance and high meltstrength.This data was supplied by SABIC-IP for the Europe-Africa-Middle East region. |
|||
Density | 1.15 g/cc | 0.0415 lb/in³ | ASTM D792 |
Covestro Texin® DP7-3008 Thermoplastic Polyurethane, Polyester-based, Aliphatic
(discontinued **) Information provided by Bayer Corporation, Plastics DivisionAs of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and has officially adopted its new name – Covestro. This produ.. |
|||
Density | 1.15 - 1.38 g/cc | 0.0415 - 0.0499 lb/in³ | Average value: 1.20 g/cc Grade Count:8 |
Overview of materials for Acrylonitrile Butadiene Styrene (ABS), 30% Carbon Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Acrylonitrile Butadiene Styrene (ABS), 30% Carbon Fiber Filled". Specific grades with carbon fiber conte.. |
|||
Density | 1.15 g/cc | 0.0415 lb/in³ | ASTM D792 |
Covestro Apec® DP9-9354 High-Heat Polycarbonate, Flame-Retardant
(discontinued **) Information provided by Bayer Corporation, Plastics DivisionAs of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and has officially adopted its new name – Covestro. This produ.. |
|||
Density | 1.15 g/cc | 0.0415 lb/in³ | |
Fibre Glast Epolite 2427 Epoxy
(discontinued **) Information provided by Fibre Glast Developments Corporation. |
|||
Density | 1.15 g/cc | 0.0415 lb/in³ | ISO 1183 |
Lucite International Diakon® ST50G8 Toughened Acrylic Polymer The Diakon® impact PMMA series offer the best combination of impact, chemical and heat resistance and provide rigidity and surface hardness. The grades in the Diakon® series can be processed b.. |
|||
Density | 1.15 g/cc | 0.0415 lb/in³ | ISO R 1183 |
Schwartz Technical Plastics LAMIGAMID® 319 Cast Polyamide 6, Oil Filled, Conditioned Application: sheaves and wheels without additional bearings, sliding linersInformation provided by Schwartz Technical Plastics GmbH |
|||
Density | 1.15 g/cc | 0.0415 lb/in³ | ISO 1183 |
SABIC Innovative Plastics NORYL LTA5020 PPE+PS Noryl* LTA5020 is an unfilled, injection moldable grade. Designed for improved long term heat aging, this resin also uses non-chlorinated, non-brominated FR additives to achieve a V0 UL94 rating. No.. |
|||
Density | 1.15 g/cc | 0.0415 lb/in³ | ISO R 1183 |
Schwartz Technical Plastics OPTAMID® Cast Polyamide 6, Conditioned Application: deflection rope sheaves for elevatorsInformation provided by Schwartz Technical Plastics GmbH |
|||
Density | 1.15 g/cc | 0.0415 lb/in³ | ASTM D792 |
SABIC Innovative Plastics LNP THERMOCOMP MX85738 PP LNP* THERMOCOMP* MX85738 is a compound based on Polypropylene resin containing Proprietary Filler(s). |
|||
Density | 1.15 g/cc | 0.0415 lb/in³ | dry; ISO 1183 |
DSM Akulon® K224-PG2 PA6-I-GF8 8% Glass Reinforced, Impact Modified |
|||
Density | 1.15 g/cc | 0.0415 lb/in³ | ASTM D792 |
Cresset Powers Cress-Alon™ NF3040 4% Nano Clay Loaded, 3.0 r.v. Film Grade Nylon 6, 50% RH Low density, high rigidity, high heat distortion temperature, high retention of mechanical properties under humid conditions, flame retardant, recyclable and environmentally friendly, less glass fib.. |
|||
Density | 1.15 - 1.16 g/cc | 0.0416 - 0.0419 lb/in³ | ASTM D792 |
Ensinger Tecast Vekton™ 6PA Black Unfilled Cast Nylon 6 (PA6) Tecast® 6PA Black is a black cast nylon that is more UV resistant than natural nylon 6.General Tecast® Cast Nylon Information: Tecast cast nylon, available in a variety of grades, offers a combina.. |
|||
Density | 1.15 g/cc | 0.0415 lb/in³ | ISO 1183 |
DuPont Performance Polymers Hytrel® G3548L TPC-ET
(Unverified Data**) Hytrel® G3548L is a low modulus grade with nominal hardness of 35D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injec.. |
|||
Density | 1.15 g/cc | 0.0415 lb/in³ | ISO 1183 |
Eurotec® Tecomid® NT40 NL MB PPA, impact modified, heat stabilized, natural Information provided by Eurotec® |
|||
Density | 1.15 g/cc | 0.0415 lb/in³ | ISO 1183 |
Arkema Group ORGASOL® 1002 ES 4 Nat 1 Polyamide 6 Information provided by Arkema Group |
|||
Density | 1.15 g/cc | 0.0415 lb/in³ | |
BASF Gusspolyamid® Nylon 6 (Dry As Molded) Processed by anionic polymerization of caprolactam in the presence of a catalyst and activator. Uses include semi-finished products and containers (e.g. heating oil tanks).Data was collected by ISO.. |
|||
Density | 1.15 g/cc | 0.0415 lb/in³ | Silicone Property; Arlon SQA-TMS-024 |
Arlon R35782R010 0.0105" (0.267 mm) Cured Silicone Rubber with Fiberglass Substrate Design/Construction:Top Layer of Side 1: Metalized Polymer Film Bottom Layer of Side 1: Cured Silicone RubberSubstrate: Style 138 FiberglassThis data represents typical values for the production mat.. |
|||
Density | 1.15 g/cc | 0.0415 lb/in³ | |
BASF N-Formylmorphonline Formula: C5H9NO2CAS: 4394-85-8Description: N-Formylmorpholine is a colorless to yellowish solid or liquid that is odorless.Synonyms: 4-Morpholinecarbaldehyde, Formylmorpholine, NFMApplications: Inte.. |
|||
Density | 1.15 g/cc | 0.0415 lb/in³ | |
A. Schulman ComAlloy Aqualoy® 140 Polypropylene, Glass Reinforced, Chemically Coupled NSF Data provided by the manufacturer, ComAlloy International Company.30% Glass Reinforced. In Aqualoy® materials, carefully selected base resins and proprietary additives meld hydrolytic stability an.. |
|||
Density | 1.15 g/cc | 0.0415 lb/in³ | |
Trelleborg Emerson & Cuming Stycast® 2741-15 Two-Component Epoxy Flexible Encapsulant Emerson & Cuming 2741-15 Stycast® Two-Component Epoxy Flexible EncapsulantDescriptionElectronic embedment and sealing of metals, ceramics, and plastics. Protection of stress sensitive components wh.. |
|||
Density | 1.15 g/cc | 0.0415 lb/in³ | |
Solvay RHODAFAC® RE-610 E Surfactant Description: Extremely versatile. Moderate foaming. Good electrolyte tolerance, coupling properties and hard surface detergency. Useful in heavy-duty liquid cleaners of all types, dry cleaning, pest.. |