Polymer Property : Density = 1.06 g/cc Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Physical Properties	Metric	English	Comments
Density	1.06 g/cc	0.0383 lb/in³	ISO 1183
SABIC Innovative Plastics Cycolac® G360 ABS (Europe-Africa-Middle East) CYCOLAC G360 is a high flow, high impact, medium to high heat resistant injection moulding ABS grade. It is recommended for large or complex parts in the automotive or electrical power tool segments..
Density	1.06 g/cc	0.0383 lb/in³	ASTM D792
Polymer Resources PPX-GP4 Modified PPO, General Purpose with HDT of 210 F (Unverified Data**) Process: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples. Information provided by Polymer Resources Corporation.
Density	1.06 g/cc	0.0383 lb/in³
Ineos ABS LUSTROPAK® 1020 ABS, Extrusion Grade (discontinued **) Extrusion grade.Applications: Food containers, blister packs.Information provided by Bayer.LANXESS was spun-off from Bayer in early 2005. Business renamed Ineos ABS after INEOS acquires a majority ..
Density	1.06 g/cc	0.0383 lb/in³
Ineos ABS Centrex® 811 ASA Blend (discontinued **) Key Features:UnfilledHigh impact or high impact modifiedLight stabilized or stable to lightU.V. stabilized or stable to weatherSuitable processing methods:Injection moldingInformation provided by Ba..
Density	1.06 - 3.80 g/cc	0.0383 - 0.137 lb/in³	Average value: 1.42 g/cc Grade Count:323
Overview of materials for Silicone, Molded, Glass Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Silicone, Molded, Glass Fiber Filled". Each property range of values reported is minimum and maximum val..
Density	1.06 g/cc	0.0383 lb/in³	DAM; ISO 1183
DuPont Performance Polymers Zytel® 151 NC010 Nylon 612 (Unverified Data**) Zytel® 151 NC010 is a PA 612 resin.Information provided by DuPont Performance Polymers
Density	1.06 g/cc	0.0383 lb/in³	DAM; ISO 1183
DuPont Performance Polymers Zytel® 158L NC010 Nylon 612 (Unverified Data**) Zytel® 158L NC010 is an intermediate viscosity, lubricated polyamide 612 resin that is suitable for molding and extrusion applications.Information provided by DuPont Performance Polymers
Density	1.06 g/cc	0.0383 lb/inÂ³	DIN 53479
Kraiburg TPE THERMOLASTÂ® K TA7FAA Food Grade TPE Compound easy printable, paintable, glueable without pretreatmentColorable in any shadeSubstitution for PVC and silicone rubberTypical Applications: ToysBaby productsPromotion articlesMaterial Advan..
Density	1.06 g/cc	0.0383 lb/inÂ³
Meilian Chemical PE62072 RED MASTERBATCH RED 62072 is a red LDPE-based masterbatch containing 30% pigment, designed for use in polyolefin resins (PE and PP, etc..). Color Index No.: Red 57:1Method of Usage: RED PE62072 is designed for ease..
Density	1.06 g/cc	0.0383 lb/inÂ³	(DAM)
Ineos ABS TriaxÂ® 1120 ABS + Polyamide Blend (Conditioned) Key Features:UnfilledPlatableHigh impact or high impact modifiedSuitable processing methods:Injection moldingFilm extrusionBlow molding
Density	1.06 g/cc	0.0383 lb/inÂ³	ISO 1183
Lucobit LucofinÂ® 1413-t1 Polyolefin TPO Granules, Dark Grey Lucofin are colored, highly stabilized polyolefin-based TPO granules. The t1 series is distinguished by good tenacity, high biaxial extensibility and flexibility outstanding breaking strength, and ..
Density	1.06 g/cc	0.0383 lb/in³	ASTM D792
Tipco Tipcolene® CR 8233 - 20% Talc/Mineral Reinforced Polypropylene Copolymer Compound 20% Mineral Reinforced PP CopolymerApplications: Automotive Pillars & TrimsProcessing: Injection MoldingInformation provided by the Manufacturer, Tipco Industries Ltd., India.
Density	1.06 g/cc	0.0383 lb/in³	ASTM D 792
Cossa Polimeri ESTADIENE 0815 HHT Acrylonitrile Butadiene Styrene ABS with very high heat resistanceGood melt flow rate, good impact resistance, excellent surface appearance, good processabilityInformation provided by Cossa Polimeri S.r.l.
Density	1.06 g/cc	0.0383 lb/in³	ISO 1183/A
ExxonMobil Exxtral™ BMV 208 Performance Polyolefin Product Description: Polyolefin injection molding compound with very high flow, high stiffness, good low temperature impact resistance, and excellent processability for automotive exterior trim appl..
Density	1.06 g/cc	0.0383 lb/in³	ASTM D792-91
Engineered Polymer Solutions HIPS 0602 Information provided by Engineered Polymer Solutions.
Density	1.06 g/cc	0.0383 lb/in³	DAM; ISO 1183
DuPont Performance Polymers Zytel® ST7301 BK356 Nylon 6 (Unverified Data**) Super Toughened Polyamide 6 Zytel ST7301 BK356 is a Super Tough heat stabilized lubricated black polyamide 6 resin for injection molding and extrusion. It offers outstanding impact resistance over a..
Density	1.06 g/cc	0.0383 lb/in³	DAM; ISO 1183
DuPont Performance Polymers Zytel® ST7301 NC010 Nylon 6 (Unverified Data**) Super Toughened Polyamide 6 Zytel ST7301 NC010 is a Super Tough heat stabilized lubricated polyamide 6 resin for injection molding and extrusion. It offers outstanding impact resistance over a wide ..
Density	1.06 g/cc	0.0383 lb/in³
BASF Luranyl® KR 2402 Polyphenylene Ether + Styrene-Butadiene Blend, Impact Grade Base grade with a balanced combination of impact strength and stiffness for parts calling for good heat deformation resistance (e.g. warm-air vents, coil formers, sheet and wheel covers).Data was co..
Density	1.06 g/cc	0.0383 lb/in³	ASTM D792
BASF Ultramid® BU50I BK 106 PA6 (Dry) Description: Ultramid Ultratough Nylon BU50I BK-106 is an unreinforced PA6, impact modified, pigmented black, injection molding product that maintains its impact strength and ductility to -40 deg F ..
Density	1.06 g/cc	0.0383 lb/in³	ASTM D792
Ashley Polymers Ashlene® P252WO PPO A flame retardant resin with excellent heat deflection temperature and good impact strength.Data provided by the manufacturer
Density	1.06 g/cc	0.0383 lb/in³	Uncured
3M Scotch-Weld™ EC40 General Purpose Instant Adhesive 3M™ Scotch-Weld™ General Purpose Instant Adhesives are single component, high strength ethyl cyanoacrylate adhesive designed to bond to a variety of substances including most plastics, rubbers, me..
Density	1.06 g/cc	0.0383 lb/in³	ASTM D792-91
Multibase Multi-ABS 3632 High Heat Resistant Data provided by Multibase.
Density	1.06 g/cc	0.0383 lb/in³	ISO 1183
Polykemi AB POLYfill PP 150ENH Polypropylene, Flame Retardant, Halogen Free Information provided by Polykemi AB
Density	1.06 g/cc	0.0383 lb/in³	DAM; ISO 1183
DuPont Performance Polymers Zytel® FG151L NC010 Nylon 612 (Unverified Data**) Unreinforced Polyamide 612 with Developed for Food Contact ApplicationsInformation provided by DuPont Performance Polymers
Density	1.06 g/cc	0.0383 lb/in³	ASTM D792
M. Holland Company IS200 Polystyrene, High Impact (discontinued **) Uses: Audio Tapes, Household Goods, ToysProcessing Method: Injection MoldingInformation provided by M. Holland.
Density	1.06 g/cc	0.0383 lb/in³	ISO 1183A
Ineos Nova 202 Crystal Polystyrene High Heat Extrusion Grade (discontinued **) Excellent heat resistance, Fast cyclingApplications: XPS food packaging, Foam insulation, CD boxes, medical and food disposables, Sheet and profile extrusionProperties were determined on injection m..
Density	1.06 g/cc	0.0383 lb/in³	ASTM D792
Ashley Polymers Ashlene® P268WO PPO An extrusion grade for general purpose application requiring flame retardancy and good impact resistance.Data provided by the manufacturer
Density	1.06 g/cc	0.0383 lb/in³	ASTM D792
Polymer Resources PPX-GP6 Modified PPO, General Purpose with HDT of 290 F (Unverified Data**) Process: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples. Information provided by Polymer Resources Corporation.
Density	1.06 g/cc	0.0383 lb/in³	ISO 1183
Solvay TECHNYL® 1021ST PA6, DRY Description: Polyamide 6, unfilled, super tough impact modified, for injection moldingAvailable in: Asia Pacific Product Applications: TECHNYL® 102ST has the highest level impact strength and balan..