Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.05 g/cc | 0.0379 lb/in³ | |
Plastcom SLOVALEN PH 49 GF 10 GB 20 PP, 20% glass beads, 10% glass fibre, coupling agent FeaturesModified homopolymer PP for injection moulding, chemically reinforced with 10 % glass fiber and 20% glass beads, contains themodifier of mechanical properties. Increased strength in comparis.. |
|||
Density | 1.05 g/cc | 0.0379 lb/in³ | ISO 1183 |
Polimeri Europa Edistir N 1840 Polystyrene General purpose polystyrene combining easy flow and medium heat. Edistir N 1840 is suggested in extrusion for glossy capping of HIPS sheets and for blending with HIPS or clear SBS for stiffer therm.. |
|||
Density | 1.05 g/cc | 0.0379 lb/in³ | ISO 1183 |
SABIC Innovative Plastics Cycolac® S701 ABS (Europe-Africa-Middle East) CYCOLAC S701 is a new developed ABS providing a superior balance of properties. Its wide processing window, excellent flow and good mechanical properties give this material an excellent fit in appli.. |
|||
Density | 1.05 g/cc | 0.0379 lb/in³ | ISO 1183 |
Polykemi AB SCANLON A 5005B UV PA/ABS-Blend Information provided by Polykemi AB |
|||
Density | 1.05 g/cc | 0.0379 lb/in³ | ASTM D792 |
Polymer Resources ABS-GP1-[color]-3 ABS, General Purpose, UV-stabilized Process: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples. Information provided by Polymer Resources Corporation. |
|||
Density | 1.05 g/cc | 0.0379 lb/in³ | ISO 1183 |
Total Lacqrene® 4240(EU) High Impact Polystyrene
(discontinued **) LACQRENE® 4240 is a high heat resistance, high impact polystyrene for the extrusion industry. Good mechanical and thermal properties leads to the production of thermoformed articles of good rigidi.. |
|||
Density | 1.05 g/cc | 0.0379 lb/in³ | Typical value for ABS |
Ineos ABS Lustran® 1460, Injection Grade
(discontinued **) Injection molding grade, increased heat and impact resistance, medium gloss.Information provided by Bayer.LANXESS was spun-off from Bayer in early 2005. Business renamed Ineos ABS after INEOS acqui.. |
|||
Density | 1.05 g/cc | 0.0379 lb/in³ | |
Polimeri Europa SINKRAL B23 ABS, Heat Stabilized
(discontinued **) Symbol according to ISO 1043-1: ABS Grade designation according to ISO 2580-ABS 1,MG,105-04-16-25 High heat resistant grade with good impact resistance. Suitable for injection moulding and extrusi.. |
|||
Density | 1.05 - 1.45 g/cc | 0.0379 - 0.0524 lb/in³ | Average value: 1.33 g/cc Grade Count:26 |
Overview of materials for Phenolic, Novolac, Cellulose Filled This property data is a summary of similar materials in the MatWeb database for the category "Phenolic, Novolac, Cellulose Filled". Each property range of values reported is minimum and maximum valu.. |
|||
Density | 1.05 g/cc | 0.0379 lb/in³ | ASTM D792 |
Global MPP-120-C 20% Mica Reinforced Polypropylene Information provided by Global Polymers Corporation. |
|||
Density | 1.05 g/cc | 0.0379 lb/in³ | |
Ineos ABS Lustran® H802 High heat resistance, increased flow.,Property data per ISO test methods. |
|||
Density | 1.05 g/cc | 0.0379 lb/in³ | ASTM D792 |
Multibase Multi-Flamâ„¢ 0112 PP NH Polypropylene Features:Flame RetardantHalogen Content, Low to None Forms:PelletsProcessing Methods:Injection MoldingExtrusionUses:TubingPipingFurnitureInformation provided by Multibase |
|||
Density | 1.05 g/cc | 0.0379 lb/in³ | ISO 1183 |
SABIC Innovative Plastics NORYL PKN4775 PPE+PS PPE+PS blend. Opaque. FDA compliant in limited colors. High heat. Modulus at elevated temperature. Good ESCR performance. Thin wall extrusion and injection molding. Typical applications include pack.. |
|||
Density | 1.05 g/cc | 0.0379 lb/in³ | ISO 1183 |
SABIC Innovative Plastics NORYL N110 PPE+HIPS (Europe-Africa-Middle East) NORYL N110 is an unfilled material, with a Vicat B/120 of 115 °C according ISO 306. NORYL N110 has medium temperature resistance and good |
|||
Density | 1.05 g/cc | 0.0379 lb/in³ | |
Master Bond MB302 Cyanoacrylate Adhesive System For rubber & plastic bonding, fills gap to 0.005Information provided by Master Bond Inc. |
|||
Density | 1.05 g/cc | 0.0379 lb/in³ | ISO 1183 |
Total PSC 1450N High Heat Resistance Polystyrene 1450N is a high heat resistance, easy flowing crystal polystyrene for the production of thick insulation board. The low viscosity of this grade makes it particularly suitable for the production of .. |
|||
Density | 1.05 g/cc | 0.0379 lb/in³ | |
Loctite® 262 Medium to High Strength Threadlocker ThreadlockersInvented by Loctite Corporation as a revolutionary method to lock and seal threaded fasteners, Loctite® Liquid Threadlockers have found wide acceptance in a range of applications--from.. |
|||
Density | 1.05 g/cc | 0.0379 lb/in³ | |
Loctite® 420 General Purpose Ethyl Cyanoacrylate Bonding Adhesive Cyanoacrylate Bonding AdhesivesLoctite® technology has made the productivity promises of cyanoacrylate adhesives a reality with the industry's widest selection of high-performance, application-.. |
|||
Density | 1.05 g/cc | 0.0379 lb/in³ | ASTM D 792 |
Cossa Polimeri ESTADIENE 3008 MT Acrylonitrile Butadiene Styrene ABS with very high impact resistanceHigh impact resistance at low temperature, medium heat resistance, good processabilityInformation provided by Cossa Polimeri S.r.l. |
|||
Density | 1.05 g/cc | 0.0379 lb/in³ | |
Arkema Group Orgalloy® LE 60ES03 Flexible Nylon Alloy (Conditioned) LE series, flexible polyamide alloys: processability on PE screw, low moisture absorption, chemical resistance (no known solvents).higher in viscosity than LE 6000, suited to the blow molding of tec.. |
|||
Density | 1.05 g/cc | 0.0379 lb/in³ | ASTM D792 |
Aclo Accucomp ABS ABS811L Medium Impact Grade |
|||
Density | 1.05 g/cc | 0.0379 lb/in³ | |
Arkema Group Rilsan® BMN P40 D Nylon 11 (Dry) Designation ISO 1874-PA11-P,MR,12-003Flexible grade for injection molding. Available colors: black, natural and white. Mold release agent.Flexibility. Outstanding working properties. Easy filling of.. |
|||
Density | 1.05 g/cc | 0.0379 lb/in³ | ASTM D792 |
Ashley Polymers Ashlene® ABS Resin E213B General purpose, black, utility grade for injection molding with medium gloss.Data provided by the manufacturer |
|||
Density | 1.05 g/cc | 0.0379 lb/in³ | ASTM D792 |
Adell ZS-30 Nylon/Olefin Alloy Data provided by Adell Plastics, Inc. |
|||
Density | 1.05 g/cc | 0.0379 lb/in³ | |
BASF Polystyrol® 454 C Impact Grade Polystyrene (Europe) Easy flowing, medium-impact grade.Data was collected by ISO methods and provided by BASF. |
|||
Density | 1.05 g/cc | 0.0379 lb/in³ | ASTM D792 |
SABIC Innovative Plastics LNP STAT-KON MFD02 PP LNP* STAT-KON* MFD02 is a compound based on Polypropylene resin containing 10% Glass Fiber. Added features of this material include: Electrically Conductive. |