Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 3.01 g/cc | 0.109 lb/in³ | |
PCC-Advanced Forming Technology 63% AlSiC Metal Matrix Composite AlSiC metal matrix composites are formed by pressure infiltrating molten aluminum into silicon carbide preforms. This method of casting is typically used in applications where solution requirements .. |
|||
Density | 3.03 g/cc | 0.109 lb/in³ | |
PCC-Advanced Forming Technology 68% AlSiC Metal Matrix Composite AlSiC metal matrix composites are formed by pressure infiltrating molten aluminum into silicon carbide preforms. This method of casting is typically used in applications where solution requirements .. |
|||
Density | 3.02 g/cc | 0.109 lb/in³ | |
PCC-Advanced Forming Technology AlSiC-SD Metal Matrix Composite AlSiC metal matrix composites are formed by pressure infiltrating molten aluminum into silicon carbide preforms. This method of casting is typically used in applications where solution requirements .. |
|||
Density | 3.03 g/cc | 0.109 lb/in³ | |
Poco Graphite SUPERSiC® Si-3C Silicon Carbide SUPERSiC that has been infiltrated with silicon and then coated with a 75 µm CVD SiC coating, sealing off the porosity.Uses: Ideal for high-temperature vacuum CVD systemsInformation provided by Poc.. |
|||
Density | 3.02 g/cc | 0.109 lb/in³ | |
Ferro EG 2810 Dental Glass Glass Type: Ba-Al-B-Si Typical Application: Glass Filler Ferro's Dental Glasses are standard x-ray opaque glass powders and inorganic fillers for use in dental restorations. Ferro also manufacture.. |
|||
Density | 3.01 g/cc @Temperature 25.0 °C |
0.109 lb/in³ @Temperature 77.0 °F |
|
Schott Glass 8095 Lead Glass Lead glass (28% PbO), electrically highly insulating, highly x-ray absorbing General electrotechnical applicationInformation provided by SCHOTT AG. |
|||
Density | 3.03 g/cc | 0.109 lb/in³ | |
Schott N-SF1 Glass Information Provided by SCHOTT North America, Inc. |
|||
Density | 3.01 g/cc | 0.109 lb/in³ | |
Schott P-SK57 Glass Suitable for precision moldingInformation Provided by SCHOTT North America, Inc. |
|||
Density | 3.03 g/cc | 0.109 lb/in³ | ASTM D792 |
Techmer ES HiFill® PA6 0303 B Availability: North AmericaForms: PelletsFiller/Reinforcement: Unspecified Filler/ReinforFeatures: High Specific GravityAppearance: Natural Color and WhiteInformation provided by TP Composites, Inc... |
|||
Density | 3.01 g/cc | 0.109 lb/in³ | ASTM D792 |
SABIC Innovative Plastics LNP THERMOCOMP TH0300B PU LNP* Thermocomp* Th0300B is a compound based on Polyurethane containing proprietary fillers. Characteristics of this grade are High Specific Gravity. |
|||
Density | 3.02 g/cc | 0.109 lb/in³ | ASTM C135 |
M Cubed Technologies HSC-702 Aluminum-toughened Reaction Bonded Silicon Carbide High fracture tougness reaction bonded SiC. Used in applications that require both high wear and high impact resistance. Bullnoses, fan liners, hydrocyclone liners, etc.Information provided by M C.. |
|||
Density | 3.01 g/cc | 0.109 lb/in³ | ASTM C135 |
M Cubed Technologies ASC-701 Aluminum alloy-70% SiC Metal Matrix Composite High stiffness, low density, low CTE composite. Components can be formed with complicated features, and can be machined to tight tolerances. Applications in high-precision equipment--semiconductor.. |
|||
Density | 3.01 g/cc | 0.109 lb/in³ | ASTM C135 |
M Cubed Technologies SSC-903 Reaction-Bonded Silicon Carbide Coards-grained reaction-bonded SiC for high wear applications. Bullnoses, fan liners, hydrocyclone liners, etc. Can be cast into very large shapes (greater than 4 ft. square, 5-6 inches thick)Info.. |
|||
Density | 3.03 g/cc | 0.109 lb/in³ | |
3M Nextel™ 550 Industrial Ceramic Fiber Chemical composition above is wt%. Crystal phases are gamma alumina amorphous SiO2. Filament diameter is 10-12 µm.3M Nextel fibers 312, 440, and 550 are designed for non-structural applications w.. |
|||
Density | 3.03 g/cc | 0.109 lb/in³ | |
3M Nextel™ CF-40 Woven Fabric 550 Information provided by 3M |
|||
Density | 3.03 g/cc | 0.109 lb/in³ | |
Poco Graphite SUPERSiC® Si-8C Silicon Carbide SUPERSiC that has been infiltrated with silicon and then coated with a 200 µm CVD SiC coatingUses: Ideal for optical and lithography componentsInformation provided by Poco Graphite |
|||
Density | 3.02 g/cc | 0.109 lb/in³ | |
Ceradyne Ceralloy® 2710 BeO-SiC Applications:terminationssever wedgesload pelletsabsorbersFeatures: former industry standard for terminations etc.Information provided by Ceradyne Company |
|||
Density | 3.01 g/cc | 0.109 lb/in³ | |
Ceramic Process Systems AlSiC-9, 63 vol% SiC Aluminum alloy A356.2 used. Hermeticity < 1x109 atm-cc/s He.CPS fabricates AlSiC by preparing an SiC preform which is subsequently infiltrated by molten aluminum metal. After infiltration, compone.. |