Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Density = 0.0488 lb/in³ Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Physical Properties Metric English Comments
Density 1.35 g/cc
0.0488 lb/in³
ISO 1183
PolyOne OnForce™ LFT NN-40LCF/001 Grey Polyamide 66 (Nylon 66)
PolyOne's Long Fiber Thermoplastic (LFT) compounds are formulated for demanding applications which require high stiffness and good impact such as metal replacement or other structural applications. ..
Density 1.35 g/cc
0.0488 lb/in³
Plastcom SLOVASTER® B1 GF 6 HML PBT, 6% glass fibre
FeaturesPBT for injection moulding, chemically reinforced with 6 % glass fibre. Characterised by excellent properties also at minus temperatures like eg. modulus of elasticity in tension and bending..
Density 1.35 g/cc
0.0488 lb/in³
ASTM D792
Albis Plastics PC/PET 748/718 GF 20 HZ 20% Glass Fiber  (discontinued **)
Amorphous Polycarbonate /Polyethylene Terephthalate Blend (PC/PET)Characteristics: High Strength, Rigidity and Creep Resistance. Good Chemical ResistanceApplications: Pump Components, Industrial and..
Density 1.35 g/cc
0.0488 lb/in³
ISO 1183
Mitsubishi Xantar® MX 1082 Polycarbonate-20% Glass Reinforced
Xantar® materials are engineered for performance, consistency and reliability. This makes Xantar® resins ideal for interior automotive components, electrical equipment and consumer appliances ..
Density 1.35 g/cc
0.0488 lb/in³
ASTM D792
SABIC Innovative Plastics LNP LUBRICOMP EL003 PEI (Asia Pacific)
LNP LUBRICOMP* EL003 is a compound based on Polyetherimide resin containing PTFE. Added features of this material include: Internally Lubricated.
Density 1.35 g/cc
0.0488 lb/in³
ISO 1183
SABIC Innovative Plastics NORYL V03505 PPE+HIPS (Asia Pacific)
Noryl* V03505 is a 35% milled fiber reinforced, injection moldable grade. Designed for good dimensional stability and low warpage, this resin also uses non-chlorinated, non-brominated FR additives t..
Density 1.35 g/cc
0.0488 lb/in³
ASTM D792
Solvay Specialty Polymers Radel® R-7159 Polyphenylsulfone (PPSU)
Radel® R-7159 polyphenylsulfone (PPSU) was developed specifically for aircraft interior applications. The product complies with the FAA regulation 14CFR Part 25 Appendix F, offering vertical burn..
Density 1.35 g/cc
0.0488 lb/in³
ASTM D792
Techmer ES HiFill® PA6/6 GF33 RM L 33% Glass Filled
Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 33% Filler by WeightAdditive: Lubricant and Heat StabilizerFeatures: Lubricated, Low Moisture Absorption and..
Density 1.35 g/cc
0.0488 lb/in³
ASTM D792
SABIC Innovative Plastics LNP THERMOCOMP DF004 PC
LNP* THERMOCOMP* DF004 is a compound based on Polycarbonate resin containing 20% Glass Fiber.
Density 1.35 g/cc
0.0488 lb/in³
ASTM D 792
SABIC Innovative Plastics LNP Thermocomp RFZ42 PA 66 (Asia Pacific)
LNP* Thermocomp* RFZ42 is a compound based on Nylon 66 resin containing Glass Fiber, Milled Glass.This data was supplied by SABIC-IP for the Asia Pacific region.
Density 1.35 g/cc
0.0488 lb/in³
ISO 1183
Tisan TISLAMID® 6 30% Glass Bead Reinforced Nylon 6
TISLAMID has a wide area of application in electric/electronic, automotive, durable goods and telecommunications industries. It demonstrates characteristics such as Excellent chemical resistanceElec..
Density 1.35 g/cc
0.0488 lb/in³
DIN 53479
Polyram PlusTek PB340S6 Nylon 6, 30% Glass beads
30% glass beads reinforced polyamide 6 for injection molding applicationsInformation provided by Polyram Ram On Ind.
Density 1.35 g/cc
0.0488 lb/in³
(DAM); ISO 1183
DSM Akulon® K224-HG6 (Cond.) 30% Glass Reinforced Nylon 6 (North America)
Description: The Akulon portfolio is engineered for optimum performance to suit different processing techniques and end use markets.Unfilled Extrusion ResinsAkulon resins are available with melt vis..
Density 1.35 g/cc
0.0488 lb/in³
24hr/23°C/50% RH; ISO 1183-A; IEC/EN 60893-2 8.1
Elektro-Isola Etronit IIQ R XX Phenolic, Paper Reinforcement, Yellow, Sheets
Description: Mechanically a good Etronit type with electrical properties adequate for insulation in low-voltage applications. Applications: Used in electrical appliances, bus-bar carriers, partition..
Density 1.35 g/cc
0.0488 lb/in³
ISO 1183
EMS-Grivory Grivory® BG-30 PA6-GF30
Product description: Grilon BG-30 is a heat stabilized PA6 injection molding grade with 30% glass fibers. Grilon BG-30 has the following important properties: High stiffnessGood balance between stre..
Density 1.35 g/cc
0.0488 lb/in³
ISO 1183
EMS-Grivory Grivory® BG-30 S PA6-GF30
Product description: Grilon BG-30 S is a heat stabilized PA6 injection molding grade with 30% glass fibers. Grilon BG-30 S has the following important properties: Excellent surface finishEasy flowin..
Density 1.35 g/cc
0.0488 lb/in³
ISO 1183
CP-Polymer-Technik Wellamid® 6600 CF30 HWCP 30% Carbon Fiber Nylon 66, Heat Stabilized, Conditioned
Information provided by CP-Polymer-Technik GmbH & Co. KG
Density 1.35 g/cc
0.0488 lb/in³
ASTM D792, ISO 1183
EPICHEM PA 6 GF 30 Polyamide 6, 30% Glass
Characteristics: medium viscosity, 30% glass fibre filled
Density 1.35 g/cc
0.0488 lb/in³
Silicone Property; Arlon SQA-TMS-024
Arlon 56141R025 0.025" (0.635 mm) Uncured Silicone Rubber with Fiberglass Substrate
Design/Construction: Interleave: PolyethyleneSide 2: Uncured Silicone Rubber Substrate: 1564 Style Fiberglass Side 1: Uncured Silicone Rubber This data represents typical values for the production m..
Density 1.35 g/cc
0.0488 lb/in³
ISO 1183
BASF Ultraform N 2640 Z4 UNC Q600 POM
Ultraform N2640 Z4 UNC Q600 is a high toughness, elastomer-modified injection molding POM grade.
Density 1.35 g/cc
0.0488 lb/in³
ASTM D792
Chang Chun Plastic Longlite PM T359J General Purpose Phenolic Molding Compound
ASTM Grades per ASTM D700 are 3, 14.Information provided by Dowell Trading Company Ltd.
Density 1.35 g/cc
0.0488 lb/in³
Silicone Property; Arlon SQA-TMS-024
Arlon 55106R030 0.030" (0.762 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate
Design/Construction: Interleave: Polyethylene Side 1: Uncured Silicone RubberSubstrate: Style 162 FiberglassSide 2: Cured Silicone Rubber Product Use: Flexible heater insulationAppearance: Red silic..
Density 1.35 g/cc
0.0488 lb/in³
Silicone Property; Arlon SQA-TMS-024
Arlon 55146R030 0.030" (0.762 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate
Design/Construction: Interleave: Polyethylene Side 2: Uncured Silicone RubberSubstrate: Style 162 Fiberglass Side 1: Cured Silicone Rubber Product Use: Flexible heater insulationAppearance: Red sili..
Density 1.35 g/cc
0.0488 lb/in³
Silicone Property; Arlon SQA-TMS-024
Arlon 55276B028 0.0295" (0.749 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate
Design/Construction: Interleave: Polyethylene Side 2: Uncured Silicone Rubber Substrate: Style 162 FiberglassSide 1: Cured Silicone Rubber This data represents typical values for the production mate..
Density 1.35 g/cc
0.0488 lb/in³
Silicone Property; Arlon SQA-TMS-024
Arlon 56866R026 0.028" Cured/Uncured Silicone Rubber with Fiberglass Substrate
Design/Construction:Side 1: Cured Silicone RubberSubstrate: Style 1564 FiberglassSide 2: Uncured Silicone RubberInterleave: 3 mil LDPEThis data represents typical values for the production mater..
Density 1.35 g/cc
0.0488 lb/in³
ISO 1183
SABIC Innovative Plastics LNP STAT-KON REF42 PA 66 (Asia Pacific)
LNP* Stat-kon* REF42 is a compound based on Nylon 66 resin containing Glass Fiber, Carbon Fiber.
Density 1.35 g/cc
0.0488 lb/in³
Layer 2, Silicone Property; Arlon SQA-TMS-024
Arlon 55279R031 0.031" (0.787 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate
Design/Construction: Interleave: Polyethylene Layer 2: Uncured Silicone Rubber Layer 1: Cured Silicone Rubber Substrate: Style 162 Fiberglass Product Use: Flexible heater insulationAppearance: Red s..
Copyright © lookpolymers.com All Rights Reserved