- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 6
- Tipco Tipcofil® AGM 802 - 25% Mineral & 15% Glass Fiber Reinforced Nylon-6 Compound, with High Heat Stability
Tipco Tipcofil® AGM 802 - 25% Mineral & 15% Glass Fiber Reinforced Nylon-6 Compound, with High Heat Stability
| Category | Polymer , Thermoplastic , Nylon , Nylon 6 |
| Manufacturer | Tipco Industries Ltd., India |
| Trade Name | Tipcofil® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Tipco Tipcofil® AGM 802 - 25% Mineral & 15% Glass Fiber Reinforced Nylon-6 Compound, with High Heat Stability.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
25% Mineral + 15% Glass Reinforced Nylon-6 CompoundApplications: General PurposeProcessing: Injection MoldingInformation provided by the Manufacturer, Tipco Industries Ltd.,
India.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.45 g/cc | 0.0524 lb/in³ | ASTM D792 |
| Water Absorption | 1.1 % | 1.1 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0030 cm/cm | 0.0030 in/in | ASTM D955 |
| Melt Flow | 8.0 g/10 min | 8.0 g/10 min | ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 100 MPa | 14500 psi | ASTM D638 |
| Elongation at Break | >= 4.0 % | >= 4.0 % | ASTM D638 |
| Flexural Yield Strength | 148 MPa | 21500 psi | ASTM D790 |
| Flexural Modulus | 7.50 GPa | 1090 ksi | ASTM D790 |
| Izod Impact, Notched (ISO) | 7.00 kJ/m² | 3.33 ft-lb/in² | ASTM D256 |
| Izod Impact, Unnotched (ISO) | 35.0 kJ/m² | 16.7 ft-lb/in² | ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 210 °C | 410 °F | ASTM D648 |
| Vicat Softening Point | 210 °C | 410 °F | ASTM D1525 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Processing Temperature | 260 °C | 500 °F | |
| Rear Barrel Temperature | 245 °C | 473 °F | |
| Middle Barrel Temperature | 255 °C | 491 °F | |
| Front Barrel Temperature | 265 °C | 509 °F | |
| Nozzle Temperature | 260 °C | 500 °F | |
| Mold Temperature | 75.0 °C | 167 °F | |
| Drying Temperature | 85.0 °C | 185 °F |
Users viewing this material also viewed the following:
- LyondellBasell Petrothene® NA216000 Low Density Polyethylene
- Kennametal Stellite Deloro® N-6 PM with P/M Processing
- ExxonMobil Teresstic M Series 32HT
- Tra-Con Tra-Duct 2916T Room Temperature Conductive Silver Epoxy Adhesive
- Loctite® Varidot™ 3617 Stencil Print
- Austin Novel Materials Texalan® 665A Polyester and Polyether based TPU
- Nyco ULTRAFIBRE® M20 Wollastonite
- Unipetrol PE HD LITEN® MB/ML 57 HDPE
- Adell ER-16 Homopolymer Polypropylene, 30% Glass Reinforced
Copyright © lookpolymers.com All Rights Reserved