- HOME
- POLYMER SEARCH
- Thermoplastic
- Vinyl (PVC)
- Teknor Apex Flexalloy® 3500-75NT Polyvinyl Chloride Elastomer
Teknor Apex Flexalloy® 3500-75NT Polyvinyl Chloride Elastomer
| Category | Polymer , Thermoplastic , Vinyl (PVC) |
| Manufacturer | Teknor Apex Company |
| Trade Name | Flexalloy® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Teknor Apex Flexalloy® 3500-75NT Polyvinyl Chloride Elastomer.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Features: Good Thermal Stability; Recyclable Material; Good Weather Resistance; Ultra High Molecular Weight Uses: Medical/Healthcare Applications; Pump Parts; Tubing Agency Ratings: FDA Unspecified Rating Forms: Pellets Processing Method: Extrusion; Injection MoldingInformation Provided by Teknor Apex
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.20 g/cc | 1.20 g/cc | ASTM D792 |
| Linear Mold Shrinkage | 0.010 - 0.025 cm/cm | 0.010 - 0.025 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 75 | 75 | 15 seconds; ASTM D2240 |
| Tensile Strength at Break | 16.7 MPa | 2420 psi | ASTM D638 |
| Tensile Stress | 8.41 MPa @Strain 100 % |
1220 psi @Strain 100 % |
ASTM D638 |
| Elongation at Break | 370 % | 370 % | ASTM D638 |
| Tear Strength | 46.5 kN/m | 265 pli | Die C; ASTM D624 |
| Compression Set | 20 % @Temperature 22.8 °C, Time 79200 sec |
20 % @Temperature 73.0 °F, Time 22.0 hour |
ASTM D395 |
| 56 % @Temperature 70.0 °C, Time 79200 sec |
56 % @Temperature 158 °F, Time 22.0 hour |
ASTM D395 | |
| 60 % @Temperature 100 °C, Time 79200 sec |
60 % @Temperature 212 °F, Time 22.0 hour |
ASTM D395 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Brittleness Temperature | -40.0 °C | -40.0 °F | ASTM D746 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Rear Barrel Temperature | 182 - 199 °C | 360 - 390 °F | |
| Middle Barrel Temperature | 182 - 199 °C | 360 - 390 °F | |
| Front Barrel Temperature | 182 - 199 °C | 360 - 390 °F | |
| Mold Temperature | 23.9 - 51.7 °C | 75.0 - 125 °F | |
| Back Pressure | 0.345 - 1.03 MPa | 50.0 - 150 psi |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Screw Compression Ratio | 2:1 - 3:1 | |
| Screw L/D Ratio | 20:1 - 24:1 | |
| Suggested Regrind, max | 20 |
Users viewing this material also viewed the following:
- Mytex Polymers AN16L(W)-D56 Polypropylene, Talc filled, Compounded, Elastomer, Impact modified
- Nye Lubricants UniFlor 8132 (832) (UF) Synthetic Oil
- SABIC Innovative Plastics LNP LUBRICOMP RFP36S PA 66
- Solvay BRICORR® 75 TETRAKIS(HYDROXYMETHYL)PHOSPHONIUM SULPHATE (THPS)
- SABIC Innovative Plastics LNP THERMOCOMP PF006U PA 6 (Europe-Africa-Middle East)
- NAPCO H - 98 - Magnesite
- 3M 3W55Z Protective UV Tape
- Azdel SuperLite® SL552000-100 PP Resin Matrix / 55% Glass Fiber (12 mm Molded Thickness)
- Arkema Group Rilsan® AZM 30 GT8LD Nylon 12, 30% Glass Fiber Filled (Dry)
Copyright © lookpolymers.com All Rights Reserved