- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 6
- Techmer ES HiFill® PA6 0390 BK
Techmer ES HiFill® PA6 0390 BK
| Category | Polymer , Thermoplastic , Nylon , Nylon 6 |
| Manufacturer | Techmer ES |
| Trade Name | HiFill® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Techmer ES HiFill® PA6 0390 BK.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Availability: North AmericaForms: PelletsFeatures: High Specific GravityAppearance: BlackInformation provided by TP Composites, Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 3.90 g/cc | 0.141 lb/in³ | ASTM D792 |
| Water Absorption | 0.10 % @Time 86400 sec |
0.10 % @Time 24.0 hour |
ASTM D570 |
| Linear Mold Shrinkage, Flow | 0.0020 cm/cm @Thickness 3.17 mm |
0.0020 in/in @Thickness 0.125 in |
ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 44.8 MPa | 6500 psi | ASTM D638 |
| Elongation at Break | 1.0 % | 1.0 % | ASTM D638 |
| Flexural Strength | 48.3 MPa | 7000 psi | ASTM D790 |
| Flexural Modulus | 6.89 GPa | 1000 ksi | ASTM D790 |
| Izod Impact, Notched | 0.374 J/cm @Thickness 3.17 mm |
0.700 ft-lb/in @Thickness 0.125 in |
ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear, Parallel to Flow | 39.6 µm/m-°C | 22.0 µin/in-°F | ASTM D696 |
| Deflection Temperature at 0.46 MPa (66 psi) | 174 °C | 345 °F | Unannealed; ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 167 °C | 333 °F | Unannealed; ASTM D648 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.0 - 100 ohm-cm | 1.0 - 100 ohm-cm | ASTM D257 |
Users viewing this material also viewed the following:
- KB Alloys Ticar® 6% Ti - 0.04% C Titanium Carbon Aluminum Rod
- Ineos ABS Lustran® M205FC ABS Pellets, Injection Molding Grade
- Momentive Performance Materials Silplusâ„¢ 60 MP Heat Cured Rubber
- Solvay ALKAMULS® A 9 Surfactant
- SABIC Innovative Plastics LNP Thermocomp LFZ42XXC PEEK
- EMS-Grivory Grivory® XE 4158 nat PA612
- Eurostar Staramide AG6ST43H PA66, Glass Fiber Reinforced, Impact Modified, Injection Molding
- BASF Polystyrol® 476 L Impact Grade Polystyrene (Europe)
- Arlon 47571R012 0.012" Uncured Silicone Rubber with Fiberglass Substrate
- Arkema Group Oroglas® SG 10 Acrylic, Gamma Radiation Resistant (discontinued **)
Copyright © lookpolymers.com All Rights Reserved