Styron MAGNUMâ„¢ 375 HP Acrylonitrile Butadiene Styrene (ABS) Resin

Category	Polymer , Thermoplastic , ABS Polymer
Manufacturer	Styron
Trade Name	Magnum™
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Styron MAGNUMâ„¢ 375 HP Acrylonitrile Butadiene Styrene (ABS) Resin.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Overview: High Heat, Low Gloss, Medium Impact ABS resin for injection molded automotive interior trim applications.Applications: Chrysler-MSDB-191Ford-WSB-M4D690-AGM-GMP.ABS.009Information provided by Styron

Physical Properties	Metric	English	Comments
Density	1.06 g/cc	0.0383 lb/inÂ³	ASTM D792; ISO 1183/B
Apparent Bulk Density	0.680 g/cc	0.0246 lb/inÂ³	ASTM D1895
Linear Mold Shrinkage, Flow	0.0057 cm/cm	0.0057 in/in	ISO 294-4
Linear Mold Shrinkage, Transverse	0.0056 cm/cm	0.0056 in/in	ISO 294-4
Melt Flow	2.1 g/10 min @Load 3.80 kg, Temperature 230 Â°C	2.1 g/10 min @Load 8.38 lb, Temperature 446 Â°F	ASTM D1238; ISO 1133

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	47.0 MPa	6820 psi	ISO 527-2
	49.0 MPa	7110 psi	51 mm/min; ASTM D638
Elongation at Break	3.5 %	3.5 %	ISO 527-2/50
	8.8 %	8.8 %	51 mm/min; ASTM D638
Elongation at Yield	2.9 %	2.9 %	ISO 527-2/50
	3.1 %	3.1 %	51 mm/min; ASTM D638
Tensile Modulus	2.30 GPa	334 ksi	51 mm/min; ASTM D638
	2.33 GPa	338 ksi	ISO 527-2
Flexural Strength	72.0 MPa	10400 psi	3-point, 2 mm/min; ISO 178
	76.5 MPa	11100 psi	Method I (3 point load), 1.3 mm/min; ASTM D790
Flexural Modulus	2.39 GPa	347 ksi	3-point, 2 mm/min; ISO 178
	2.41 GPa	350 ksi	Method I (3 point load), 1.3 mm/min; ASTM D790
Izod Impact, Notched	1.30 J/cm @Temperature -30.0 Â°C	2.44 ft-lb/in @Temperature -22.0 Â°F	ASTM D256
	2.20 J/cm @Temperature 23.0 Â°C	4.12 ft-lb/in @Temperature 73.4 Â°F	ASTM D256
Izod Impact, Notched (ISO)	10.0 kJ/mÂ² @Temperature -30.0 Â°C	4.76 ft-lb/inÂ² @Temperature -22.0 Â°F	ISO 180/A
	25.0 kJ/mÂ² @Temperature 23.0 Â°C	11.9 ft-lb/inÂ² @Temperature 73.4 Â°F	ISO 180/A
Charpy Impact, Notched	1.10 J/cmÂ² @Temperature -30.0 Â°C	5.23 ft-lb/inÂ² @Temperature -22.0 Â°F	ISO 179/1eA
	2.20 J/cmÂ² @Temperature 23.0 Â°C	10.5 ft-lb/inÂ² @Temperature 73.4 Â°F	ISO 179/1eA
Dart Drop, Total Energy	23.0 J @Temperature -30.0 Â°C	17.0 ft-lb @Temperature -22.0 Â°F	Peak Energy; ASTM D3763
	30.0 J @Temperature 23.0 Â°C	22.1 ft-lb @Temperature 73.4 Â°F	Peak Energy; ASTM D3763

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	77.0 Âµm/m-Â°C @Temperature -40.0 - 100 Â°C	42.8 Âµin/in-Â°F @Temperature -40.0 - 212 Â°F	ASTM E831
CTE, linear, Transverse to Flow	95.0 Âµm/m-Â°C @Temperature -40.0 - 100 Â°C	52.8 Âµin/in-Â°F @Temperature -40.0 - 212 Â°F	ASTM E831
Deflection Temperature at 0.46 MPa (66 psi)	98.0 Â°C	208 Â°F	Unannealed; ISO 75-2/B
	99.4 Â°C	211 Â°F	Unannealed; ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	81.7 Â°C	179 Â°F	Unannealed; ASTM D648
	83.9 Â°C	183 Â°F	Unannealed; ISO 75-2/A
Vicat Softening Point	103 Â°C @Load 5.10 kg	217 Â°F @Load 11.2 lb	Rate A (50Â°C/h); ISO 306/B50; ASTM D1525
Flame Spread	30.0 mm/min	1.18 in/min	FMVSS 302

Processing Properties	Metric	English
Rear Barrel Temperature	238 Â°C	460 Â°F
Middle Barrel Temperature	249 Â°C	480 Â°F
Front Barrel Temperature	254 Â°C	489 Â°F
Nozzle Temperature	249 - 254 Â°C	480 - 489 Â°F
Melt Temperature	243 - 271 Â°C	469 - 520 Â°F
Drying Temperature	82.0 - 85.0 Â°C	180 - 185 Â°F
Dry Time	>= 2.00 hour	>= 2.00 hour

Users viewing this material also viewed the following: