- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Acrylonitrile Butadiene Styrene (ABS)/Nylon Blend
- Styrolution Terblend® N NM-21 EF Gray 38058 ABS+PA (Conditioned)
Styrolution Terblend® N NM-21 EF Gray 38058 ABS+PA (Conditioned)
| Category | Polymer , Thermoplastic , ABS Polymer , Acrylonitrile Butadiene Styrene (ABS)/Nylon Blend , Nylon |
| Manufacturer | Styrolution |
| Trade Name | Terblend® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Styrolution Terblend® N NM-21 EF Gray 38058 ABS+PA (Conditioned).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description: Terblend® N NM-21 EF is an UV stabilized ABS/PA blend combining very high impact strength, even at low temperatures. The enhanced flowability enables excellent processability and surface appearance.Information provided by STYROLUTION, which is a joint venture between BASF and INEOS
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.07 g/cc | 0.0387 lb/in³ | ISO 1183 |
| Moisture Absorption at Equilibrium | 1.3 % | 1.3 % | 23°C/50% RH; ISO 62 |
| Linear Mold Shrinkage, Flow | 0.0070 cm/cm | 0.0070 in/in | ISO 2577 |
| Melt Flow | 64.2 g/10 min @Load 10.0 kg, Temperature 240 °C |
64.2 g/10 min @Load 22.0 lb, Temperature 464 °F |
ISO 1133 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 103 | 103 | ISO 2039-2 |
| Tensile Strength, Yield | 36.0 MPa | 5220 psi | ISO 527-1/-2 |
| Elongation at Break | 50 % | 50 % | Nominal; ISO 527-1/-2 |
| Elongation at Yield | 5.0 % | 5.0 % | ISO 527-1/-2 |
| Tensile Modulus | 1.40 GPa | 203 ksi | ISO 527-1/-2 |
| Izod Impact, Notched (ISO) | 9.00 kJ/m² @Temperature -30.0 °C |
4.28 ft-lb/in² @Temperature -22.0 °F |
ISO 180/A |
| 80.0 kJ/m² @Temperature 23.0 °C |
38.1 ft-lb/in² @Temperature 73.4 °F |
ISO 180/A | |
| Charpy Impact Unnotched | NB @Temperature -30.0 °C |
NB @Temperature -22.0 °F |
ISO 179/1eU |
| NB @Temperature 23.0 °C |
NB @Temperature 73.4 °F |
ISO 179/1eU | |
| Charpy Impact, Notched | 1.00 J/cm² @Temperature -30.0 °C |
4.76 ft-lb/in² @Temperature -22.0 °F |
ISO 179/1eA |
| 8.50 J/cm² @Temperature 23.0 °C |
40.4 ft-lb/in² @Temperature 73.4 °F |
ISO 179/1eA |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Vicat Softening Point | 110 °C | 230 °F | VST/B/50; ISO 306 |
| 200 °C | 392 °F | VST/A/50; ISO 306 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+11 ohm-cm | 1.00e+11 ohm-cm | IEC 60093 |
| Dielectric Constant | 3.8 @Frequency 1.00e+6 Hz |
3.8 @Frequency 1.00e+6 Hz |
IEC 60250 |
| Dissipation Factor | 0.090 @Frequency 1.00e+6 Hz |
0.090 @Frequency 1.00e+6 Hz |
IEC 60250 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Temperature | 240 - 270 °C | 464 - 518 °F | Injection Molding |
| Mold Temperature | 40.0 - 80.0 °C | 104 - 176 °F | Injection Molding |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Color | Gray 38058 | |
| Commercial Status | Europe | |
| Primary Processing Technique | Injection Molding and Extrusion |
Users viewing this material also viewed the following:
- NCMT NanoPAC™ HG500 High Performance Polypropylene Nanocomposite
- Ravago Manufacturing Americas Hylex® P1018FRVNHE Polycarbonate
- Kolon Kocetal® VT701 Modified Grade Acetal Copolymer (discontinued **)
- Lotus Nano Paint NAP 101 Nano-paint
- ITW Plexus Plexusâ„¢ AO420 Methacrylate Adhesive
- SABIC Innovative Plastics NORYL WCP781 PPE-TPE (Asia Pacific)
- Styron DGF080.00 ESU Polypropylene
- Diamond Polymers NPP25-1202 TF20 20% Talc Filled Copolymer Polypropylene, Impact Modified, High Heat, High Stiffness with UV and Paintable Versions
- DuPont Teijin Films Teijin® Tetoron® HSL Polyester Film, 500 Gauge
- DuPont Performance Polymers Delrin® SC652 NC010 Acetal (POM) (Unverified Data**)
Copyright © lookpolymers.com All Rights Reserved