POLYMER SEARCH

Styrolution TerblendÂ® N NM-12 ABS/PA6 (Dry)

Category	Polymer , Thermoplastic , ABS Polymer , Acrylonitrile Butadiene Styrene (ABS)/Nylon Blend , Nylon
Manufacturer	Styrolution
Trade Name	Terblend®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Styrolution TerblendÂ® N NM-12 ABS/PA6 (Dry).pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Terblend N NM-12 is an ABS/PA6 blend combining high impact strength and rigidity with an excellent processability and surface appearance.Information provided by STYROLUTION, which is a joint venture between BASF and INEOS.

Physical Properties	Metric	English	Comments
Density	1.07 g/cc	0.0387 lb/inÂ³	ISO 1183
Moisture Absorption at Equilibrium	1.4 %	1.4 %	23Â°C/50% R.H.; ISO 62
Melt Flow	23 g/10 min @Load 10.0 kg, Temperature 240 Â°C	23 g/10 min @Load 22.0 lb, Temperature 464 Â°F	ISO 1133

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	39.0 MPa	5660 psi	0.2 in/min; ASTM Test
Tensile Strength, Yield	50.0 MPa	7250 psi	50mm/min; ISO 527
	50.0 MPa	7250 psi	2 in/min; ASTM Test
Elongation at Break	>= 30 %	>= 30 %	0.2 in/min; ASTM Test
	40 %	40 %	50mm/min, Nominal strain; ISO 527
Elongation at Yield	3.2 %	3.2 %	50mm/min; ISO 527
Tensile Modulus	2.28 GPa	331 ksi	ASTM Test
	2.30 GPa	334 ksi	1mm/min; ISO 527
Flexural Modulus	2.20 GPa	319 ksi	ISO Data
Charpy Impact Unnotched	NB	NB	ISO 179
Charpy Impact, Notched	1.50 J/cmÂ²	7.14 ft-lb/inÂ²	ISO 179
	0.900 J/cmÂ² @Temperature -30.0 Â°C	4.28 ft-lb/inÂ² @Temperature -22.0 Â°F	ISO 179

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	90.0 Âµm/m-Â°C	50.0 Âµin/in-Â°F	ISO 11359
Deflection Temperature at 0.46 MPa (66 psi)	99.0 Â°C	210 Â°F	ISO 75
Deflection Temperature at 1.8 MPa (264 psi)	76.0 Â°C	169 Â°F	ISO 75
Vicat Softening Point	112 Â°C	234 Â°F	(50 Â°C/h / 50N) - B/50; ISO 306
Flammability, UL94	HB @Thickness 1.60 mm	HB @Thickness 0.0630 in
	HB @Thickness 3.20 mm	HB @Thickness 0.126 in

Electrical Properties	Metric	English	Comments
Volume Resistivity	>= 1.00e+13 ohm-cm	>= 1.00e+13 ohm-cm	IEC 60093
Dielectric Constant	2.9 @Frequency 1.00e+6 Hz	2.9 @Frequency 1.00e+6 Hz	IEC 60250
	3.3 @Frequency 100 Hz	3.3 @Frequency 100 Hz	IEC 60250
Dielectric Strength	41.0 kV/mm	1040 kV/in	IEC 60243-1
Dissipation Factor	0.015 @Frequency 1.00e+6 Hz	0.015 @Frequency 1.00e+6 Hz	IEC 60250
Comparative Tracking Index	600 V	600 V	IEC 60112

Processing Properties	Metric	English	Comments
Melt Temperature	265 Â°C	509 Â°F	Injection molding
Injection Velocity	65.0 mm/sec	2.56 in/sec	Injection molding

Descriptive Properties	Value	Comments
Commercial Status	Active America
Primary Processing Technique	Injection Molding
UL.UL-C	Yes

Users viewing this material also viewed the following: