Styrolution TerblendÂ® N NG-02 8% Glass Filled ABS/PA6 (Dry)

Category	Polymer , Thermoplastic , ABS Polymer , Acrylonitrile Butadiene Styrene (ABS)/Nylon Blend, Glass Reinforced , Nylon
Manufacturer	Styrolution
Trade Name	Terblend®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Styrolution TerblendÂ® N NG-02 8% Glass Filled ABS/PA6 (Dry).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Terblend N NG-02 is a glass fibre reinforced ABS/PA6 blend with excellent dimensional stability, high impact strength and good surface appearance.Information provided by STYROLUTION, which is a joint venture between BASF and INEOS.

Physical Properties	Metric	English	Comments
Density	1.12 g/cc	0.0405 lb/inÂ³	ISO 1183
Moisture Absorption at Equilibrium	1.3 %	1.3 %	23Â°C/50% R.H.; ISO 62
Melt Flow	14 g/10 min @Load 10.0 kg, Temperature 240 Â°C	14 g/10 min @Load 22.0 lb, Temperature 464 Â°F	ISO 1133

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	50.0 MPa	7250 psi	0.2 in/min; ASTM Test
Tensile Strength, Ultimate	55.0 MPa	7980 psi	5mm/min; ISO 527
Tensile Strength, Yield	53.0 MPa	7690 psi	2 in/min; ASTM Test
Elongation at Break	3.5 %	3.5 %	5mm/min; ISO 527
	5.0 %	5.0 %	0.2 in/min; ASTM Test
Tensile Modulus	3.10 GPa	450 ksi	ASTM Test
	3.20 GPa	464 ksi	1mm/min; ISO 527
Flexural Strength	80.0 MPa	11600 psi	ISO Data
Flexural Modulus	2.80 GPa	406 ksi	ISO Data
Izod Impact, Notched (ISO)	10.0 kJ/mÂ²	4.76 ft-lb/inÂ²	ISO Test
Charpy Impact Unnotched	4.50 J/cmÂ²	21.4 ft-lb/inÂ²	ISO 179
	4.00 J/cmÂ² @Temperature -30.0 Â°C	19.0 ft-lb/inÂ² @Temperature -22.0 Â°F	ISO 179
Charpy Impact, Notched	1.20 J/cmÂ²	5.71 ft-lb/inÂ²	ISO 179
	0.600 J/cmÂ² @Temperature -30.0 Â°C	2.86 ft-lb/inÂ² @Temperature -22.0 Â°F	ISO 179

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	60.0 Âµm/m-Â°C	33.3 Âµin/in-Â°F	ISO 11359
Deflection Temperature at 0.46 MPa (66 psi)	109 Â°C	228 Â°F	ASTM Test
	110 Â°C	230 Â°F	ISO 75
Deflection Temperature at 1.8 MPa (264 psi)	87.8 Â°C	190 Â°F	ASTM Test
	90.0 Â°C	194 Â°F	ISO 75
Vicat Softening Point	108 Â°C	226 Â°F	(50 Â°C/h / 50N) - B/50; ISO 306
Flammability, UL94	HB @Thickness 1.60 mm	HB @Thickness 0.0630 in
	HB @Thickness 3.20 mm	HB @Thickness 0.126 in

Electrical Properties	Metric	English	Comments
Volume Resistivity	>= 1.00e+13 ohm-cm	>= 1.00e+13 ohm-cm	IEC 60093
Dielectric Constant	2.9 @Frequency 1.00e+6 Hz	2.9 @Frequency 1.00e+6 Hz	IEC 60250
	3.4 @Frequency 100 Hz	3.4 @Frequency 100 Hz	IEC 60250
Dielectric Strength	40.0 kV/mm	1020 kV/in	IEC 60243-1
Dissipation Factor	0.013 @Frequency 1.00e+6 Hz	0.013 @Frequency 1.00e+6 Hz	IEC 60250
Comparative Tracking Index	600 V	600 V	IEC 60112

Processing Properties	Metric	English	Comments
Melt Temperature	265 Â°C	509 Â°F	Injection molding
Injection Velocity	65.0 mm/sec	2.56 in/sec	Injection molding

Descriptive Properties	Value	Comments
Commercial Status	Active America
Primary Processing Technique	Injection Molding
UL.UL-C	Yes

Users viewing this material also viewed the following: