- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 66
- Nylon 66, 30% Glass Fiber Filled
- Solvay Technyl® A 218 V30 Nylon 66, 30% Glass Fiber, EH50
Solvay Technyl® A 218 V30 Nylon 66, 30% Glass Fiber, EH50
| Category | Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, 30% Glass Fiber Filled |
| Manufacturer | Solvay |
| Trade Name | Technyl® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Solvay Technyl® A 218 V30 Nylon 66, 30% Glass Fiber, EH50.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Polyamide PA66, reinforced with 30% of glass fiber, heat stabilized, for injection molding.Technyl A 218 V30 is used in all sectors of industry, offering an excellent combination between thermal and mechanical properties. This grade is commonly used in the automotive industry for engine components, such as water tanks, degassing and liquid containers, engine covers, and various housing.This product is available in natural, black and in colors on request.Information provided by Rhodia; Rhodia has been acquired by Solvay.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.37 g/cc | 0.0495 lb/in³ | ISO 1183-A |
| Water Absorption | 0.80 % | 0.80 % | (Beginning Dry) 24 hours in water 23°C. ISO 62 |
| Linear Mold Shrinkage | 0.0050 cm/cm | 0.0050 in/in | RHODIA-EP |
| Linear Mold Shrinkage, Transverse | 0.0080 cm/cm | 0.0080 in/in | RHODIA-EP |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Ultimate | 135 MPa | 19600 psi | ISO 527 |
| Tensile Strength, Yield | 135 MPa | 19600 psi | ISO 527 |
| Elongation at Break | 4.0 % | 4.0 % | ISO 527 |
| Tensile Modulus | 7.50 GPa | 1090 ksi | ISO 527 |
| Flexural Yield Strength | 175 MPa | 25400 psi | ISO 178 |
| Flexural Modulus | 5.90 GPa | 856 ksi | ISO 178 |
| Izod Impact Resistance | 1.60 J/cm² | 7.61 ft-lb/in² | ISO 180 |
| Charpy Impact Unnotched | 9.50 J/cm² | 45.2 ft-lb/in² | ISO 179/EU-1993 |
| Charpy Impact, Notched | 1.60 J/cm² | 7.61 ft-lb/in² | ISO 179/1EA-1993 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 263 °C | 505 °F | ISO 3146-C |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Electrical Resistivity | 1.00e+13 ohm-cm | 1.00e+13 ohm-cm | IEC 93 |
| Surface Resistance | 1.00e+12 ohm | 1.00e+12 ohm | IEC 93 |
| Dielectric Constant | 4.0 @Frequency 1e+6 Hz |
4.0 @Frequency 1e+6 Hz |
IEC 250 |
| Dielectric Strength | 29.0 kV/mm | 737 kV/in | IEC 243-1 |
| Dissipation Factor | 0.11 @Frequency 1e+6 Hz |
0.11 @Frequency 1e+6 Hz |
IEC 250 |
| Comparative Tracking Index | 425 V | 425 V | IEC 112 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Rear Barrel Temperature | 260 - 270 °C | 500 - 518 °F | |
| Middle Barrel Temperature | 270 - 280 °C | 518 - 536 °F | |
| Front Barrel Temperature | 280 - 290 °C | 536 - 554 °F |
Users viewing this material also viewed the following:
- Nitriflex Nitrilatex L-2108 Styrene Butadiene Latex
- Renegade Materials Corporation RM-3010 Bismaleimide (BMI) Resin for VARTM
- PolyOne Dynaflex™ G2745 Thermoplastic Elastomer (TPE)
- LATI Later 4-V0HF1 PBT, Flame Retardant
- SABIC Innovative Plastics LNP Thermocomp PF006 PA 6 (Europe-Africa-Middle East)
- ExxonMobil Jayflex™ TINTM Plasticizer
- Aptek 2201-A/B Fast set urethane adhesive
- Aremco Cerama-Dip™ 538-N High Temperature Specialty Ceramic-Inorganic Coating
- Polykemi AB POLYfill PPH TS8030 Polypropylene Homopolymer, Mineral Reinforced
Copyright © lookpolymers.com All Rights Reserved