Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Solvay Specialty Polymers Xydar® MG-350 Liquid Crystal Polymer, Mineral and Glass Filled  (discontinued **)<

Category Polymer , Thermoplastic , Liquid Crystal Polymer (LCP)
Manufacturer
Trade Name
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Solvay Specialty Polymers Xydar® MG-350 Liquid Crystal Polymer, Mineral and Glass Filled  (discontinued **)<.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
XYDAR MG-350 Liquid Crystal Polymer (LCP) is a mineral and glass-filled injection molding grade developed specifically for cost-effective performance in applications where a balance of flatness and strength are required. The moldability of this resin is exceptional. XYDAR MG-350 resin can fill very thin walls over long flow lengths with little or no flash, even at mold temperatures below 200°F (93°C). In addition, it has low warpage in molded products and good weld line strength. Like other XYDAR Liquid Crystal Polymers, this material temperatures), low coefficient of thermal expansion, high deflection temperature, inherent flame resistance, and outstanding resistance to most chemicals, weathering, and radiation.This resin is particularly well suited for many applications that have difficult-to-fill geometries, and require resistance to warp and strong weld lines. Potential applications for this resin include electronic connectors, burn-in sockets, automotive components, chemical processing and other mechanical devices.Information provided by Solvay Advanced Polymers. This grade was discontinued in 2006.
Physical Properties Metric English Comments
Specific Gravity 1.84 g/cc
1.84 g/cc
ASTM D792
Water Absorption <= 0.010 %
<= 0.010 %
24 hours; ASTM D570
Linear Mold Shrinkage, Flow 0.00070 cm/cm
0.00070 in/in
ASTM D955
Linear Mold Shrinkage, Transverse 0.0031 cm/cm
0.0031 in/in
ASTM D955
Mechanical Properties Metric English Comments
Tensile Strength, Ultimate 90.3 MPa
13100 psi
ASTM D638
Elongation at Break 0.90 %
0.90 %
ASTM D638
Tensile Modulus 16.1 GPa
2330 ksi
ASTM D638
Flexural Strength 160 MPa
23200 psi
ASTM D570
Flexural Modulus 15.0 GPa
2170 ksi
ASTM D570
Izod Impact, Notched 0.481 J/cm
0.900 ft-lb/in
ASTM D256
Izod Impact Unnotched 6.78 J
5.00 ft-lb
ASTM D256
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow 7.20 µm/m-°C

@Temperature 20.0 °C
4.00 µin/in-°F

@Temperature 68.0 °F
ASTM E831
CTE, linear, Transverse to Flow 59.4 µm/m-°C

@Temperature 20.0 °C
33.0 µin/in-°F

@Temperature 68.0 °F
ASTM E831
Deflection Temperature at 1.8 MPa (264 psi) 278 °C
532 °F
ASTM D648
Flammability, UL94 V-0

@Thickness 0.800 mm
V-0

@Thickness 0.0315 in
Electrical Properties Metric English Comments
Volume Resistivity 1.80e+17 ohm-cm
1.80e+17 ohm-cm
ASTM D257
Surface Resistance 1.50e+16 ohm
1.50e+16 ohm
ASTM D257
Dielectric Constant 3.9

@Frequency 1e+6 Hz
3.9

@Frequency 1e+6 Hz
ASTM D150
4.2

@Frequency 100 Hz
4.2

@Frequency 100 Hz
ASTM D150
Dielectric Strength 38.2 kV/mm

@Thickness 1.60 mm
970 kV/in

@Thickness 0.0630 in
ASTM D149
Dissipation Factor 0.013

@Frequency 100 Hz
0.013

@Frequency 100 Hz
ASTM D150
0.029

@Frequency 1e+6 Hz
0.029

@Frequency 1e+6 Hz
ASTM D150
Processing Properties Metric English Comments
Melt Temperature 321 - 360 °C
610 - 680 °F
Mold Temperature 65.6 - 93.3 °C
150 - 200 °F
Drying Temperature 149 °C
300 °F
Dry Time 6 - 8 hour
6 - 8 hour
Dew Point -28.9 °C
-20.0 °F
Copyright © lookpolymers.com All Rights Reserved