Solvay Specialty Polymers Amodel® AT-1001L Polyphthalamide (PPA) (Unverified Data**)

Category	Polymer , Thermoplastic , Polyphthalamide (PPA)
Manufacturer
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Solvay Specialty Polymers Amodel® AT-1001L Polyphthalamide (PPA) (Unverified Data**).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Amodel AT-1001L is an unreinforced, impact modified polyphthalamide (PPA) resin that exhibits exceptional impact strength at temperatures ranging from room temperature to as low as -40°F (-40°C), which suggests possible applications in ski boots and hockey skates. In addition, its chemical and wear resistance, combined with good mechanical properties, make Amodel AT-1001L resin a prime candidate for applications such as anti-friction and wear resistant components, chemical, oil field, automotive and safety equipment. - Natural: AT-1001 L NTAdditional Information: Penetration Impact, ASTM D3763, 73°F, Maximum Load: 1100 lbs Penetration Impact, ASTM D3763, 73°F, Total Energy Absorbed: 40 ft-lbs Penetration Impact, ASTM D3763, 73°F, Energy to Maximum Load: 30 ft-lbs Penetration Impact, ASTM D3763, -10°F, Total Energy Absorbed: 40 ft-lbs Penetration Impact, ASTM D3763, -10°F, Maximum Load: 1260 lbs Penetration Impact, ASTM D3763, -10°F, Energy to Maximum Load: 30 ft-lbsData is presented for dry polymer.Information provided by Solvay Specialty Polymers.

Physical Properties	Metric	English	Comments
Density	1.11 g/cc	0.0401 lb/in³	ISO 1183/A
Water Absorption	0.75 % @Time 86400 sec	0.75 % @Time 24.0 hour	ASTM D570
Linear Mold Shrinkage, Flow	0.017 - 0.019 cm/cm	0.017 - 0.019 in/in	ASTM D955
Linear Mold Shrinkage, Transverse	0.019 - 0.021 cm/cm	0.019 - 0.021 in/in	ASTM D955

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	62.1 MPa	9010 psi	ASTM D638
Elongation at Break	30 %	30 %	ASTM D638
Elongation at Yield	6.0 %	6.0 %	ASTM D638
Tensile Modulus	1.90 GPa	276 ksi	ASTM D638
Flexural Strength	96.5 MPa	14000 psi	ASTM D790
Flexural Modulus	2.21 GPa	321 ksi	ASTM D790
Poissons Ratio	0.35	0.35	ASTM E132
Shear Modulus	0.704 GPa	102 ksi	Calculated
Izod Impact, Notched	7.50 J/cm @Temperature -40.0 °C	14.1 ft-lb/in @Temperature -40.0 °F	ASTM D256
	11.0 J/cm @Temperature 23.0 °C	20.6 ft-lb/in @Temperature 73.4 °F	ASTM D256

Thermal Properties	Metric	English	Comments
Melting Point	310 °C	590 °F
Deflection Temperature at 1.8 MPa (264 psi)	120 °C @Thickness 3.18 mm	248 °F @Thickness 0.125 in	Annealed; ASTM D648

Processing Properties	Metric	English	Comments
Feed Temperature	79.4 °C	175 °F	Hopper Temperature
Rear Barrel Temperature	304 - 318 °C	579 - 604 °F
Front Barrel Temperature	316 - 329 °C	601 - 624 °F
Melt Temperature	321 - 343 °C	610 - 649 °F
Mold Temperature	65.6 - 110 °C	150 - 230 °F
Drying Temperature	110 °C	230 °F
Dry Time	4.00 hour	4.00 hour
Moisture Content	0.045 %	0.045 %

Descriptive Properties	Value	Comments
Additive	Impact Modifier
	Lubricant
	Mold Release
Appearance	Natural Color
Automotive Specifications	ASTM D5336 PPA0110A01080 Color: NT Natural
Availability	Africa & Middle East
	Asia Pacific
	Europe
	North America
	South America
Features	Ductile
	Good Chemical Resistance
	Good Wear Resistance
	Hot Water Moldability
	Impact Modified
	Low Temperature Impact Resistance
	Low Warpage
	Lubricated
Forms	Pellets
Generic	PPA
Processing Method	Injection Molding
	Water-Heated Mold Injection Molding
Uses	Automotive Applications
	Automotive Electronics
	General Purpose
	Housings
	Industrial Applications
	Industrial Parts
	Machine/Mechanical Parts
	Metal Replacement
	Oil/Gas Applications

Users viewing this material also viewed the following: