- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyphthalamide (PPA)
- Polyphthalamide (PPA), 30% Glass Fiber Reinforced
- Solvay Specialty Polymers Amodel® AS-1133 HS Polyphthalamide (PPA), 33% Glass Fiber (Dry)
Solvay Specialty Polymers Amodel® AS-1133 HS Polyphthalamide (PPA), 33% Glass Fiber (Dry)
| Category | Polymer , Thermoplastic , Polyphthalamide (PPA) , Polyphthalamide (PPA), 30% Glass Fiber Reinforced |
| Manufacturer | Solvay Specialty Polymers |
| Trade Name | Amodel® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Solvay Specialty Polymers Amodel® AS-1133 HS Polyphthalamide (PPA), 33% Glass Fiber (Dry).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Amodel® AS-1133 HS is a 33% glass reinforced, heat stabilized polyphthalamide (PPA) resin that provides excellent structural integrity in molded parts, even those with wall thicknesses greater than 0.125 in (3 mm).Features: Good Chemical Resistance; Good Creep Resistance; Good Dimensional Stability; Good Stiffness; Heat Stabilized; High Heat Resistance; High Strength; Low Moisture AbsorptionUses: Automotive Applications; Automotive Electronics; Automotive Under the Hood; Connectors; Fuel Lines; General Purpose; Housings; Industrial Applications; Industrial Parts; Lawn and Garden Equipment; Machine/Mechanical Parts; Metal Replacement; Oil/Gas Applications; Power/Other Tools; Thick-walled Parts; Valves/Valve PartsInjection Molding Notes: Amodel® compounds are shipped in moisture-resistant packages at moisture levels according to specifications. Sealed, undamaged bags should be preferably stored in a dry room at a maximum temperature of 50°C (122°F) and should be protected from possible damage. If only a portion of a package is used, the remaining material should be transferred into a sealable container. It is recommended that Amodel® resins be dried prior to molding.Additional Properties: Transmittance - ASTM D1003 (1.60 mm): > 35 %; Transmittance - ASTM D1003 (1.60 mm): > 30 %Automotive Specifications ASTM D4000 PA121 G35 Color: BK324 Black; ASTM D4000 PA121 G35 Color: NT Natural; ASTM D4000 PPA0111 G33 GB145 KD200 KN090 PN080 YI265 Color: BK324 Black; ASTM D4000 PPA0111 G33 GB145 KD200 KN090 PN080 YI265 Color: NT Natural; ASTM D6779 PA121G35; BOSCH N28 BN05-OX1 BN0510-GF35-3Anf01SO Color: NT Natural; BOSCH N28 BN05-OX1 BN0510-GF35-3Asw01SO Color: BK324 Black; DELPHI M-6071 Color: NT Natural; FORD WSK-M4D843-A2 Color: BK324 Black; FORD WSK-M4D843-A2 Color: NT Natural; ISO 1874 PA6T/6I/66, MH, 12-120, GF33 Color: BK324 Black; ISO 1874 PA6T/6I/66, MH, 12-120, GF33 Color: NT Natural; SIEMENS S219536 Color: NT NaturalInformation provided by Solvay Specialty Polymers.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.44 g/cc | 0.0520 lb/in³ | ISO 1183 |
| Filler Content | 33 % | 33 % | Glass Fiber |
| Water Absorption | 0.21 % @Time 86400 sec |
0.21 % @Time 24.0 hour |
ISO 62 |
| Linear Mold Shrinkage, Flow | 0.0040 cm/cm | 0.0040 in/in | |
| Linear Mold Shrinkage, Transverse | 0.0080 cm/cm | 0.0080 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 125 | 125 | ASTM D785 |
| Tensile Strength at Break | 221 MPa | 32100 psi | ASTM D638 |
| Tensile Strength, Yield | 225 MPa | 32600 psi | ISO 527-2 |
| Elongation at Break | 2.5 % | 2.5 % | ASTM D638 |
| 3.0 % | 3.0 % | ISO 527-2 | |
| Tensile Modulus | 12.2 GPa | 1770 ksi | ISO 527-2 |
| 13.1 GPa | 1900 ksi | ASTM D638 | |
| Flexural Strength | 326 MPa | 47300 psi | ISO 178 |
| Flexural Yield Strength | 317 MPa | 46000 psi | ASTM D790 |
| Flexural Modulus | 10.3 GPa | 1490 ksi | ISO 178 |
| 10.3 GPa | 1490 ksi | ASTM D790 | |
| Compressive Strength | 276 MPa | 40000 psi | ASTM D695 |
| Poissons Ratio | 0.41 | 0.41 | ASTM E132 |
| Shear Strength | 101 MPa | 14600 psi | ASTM D732 |
| Izod Impact, Notched | 0.850 J/cm | 1.59 ft-lb/in | ASTM D256 |
| Izod Impact, Unnotched | 10.0 J/cm | 18.7 ft-lb/in | ASTM D256 |
| Izod Impact, Notched (ISO) | 11.0 kJ/m² | 5.23 ft-lb/in² | Type 1, Notch A; ISO 180 |
| Charpy Impact Unnotched | 8.20 J/cm² | 39.0 ft-lb/in² | Type 1, Edgewise; ISO 179 |
| Charpy Impact, Notched | 1.10 J/cm² | 5.23 ft-lb/in² | Type 1, Edgewise; ISO 179 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear, Parallel to Flow | 14.0 µm/m-°C @Temperature 160 - 250 °C |
7.78 µin/in-°F @Temperature 320 - 482 °F |
2 |
| 23.0 µm/m-°C @Temperature 0.000 - 100 °C |
12.8 µin/in-°F @Temperature 32.0 - 212 °F |
2 | |
| CTE, linear, Transverse to Flow | 59.0 µm/m-°C @Temperature -50.0 - 50.0 °C |
32.8 µin/in-°F @Temperature -58.0 - 122 °F |
TMA; ASTM E831 |
| 130 µm/m-°C @Temperature 100 - 250 °C |
72.2 µin/in-°F @Temperature 212 - 482 °F |
TMA; ASTM E831 | |
| Melting Point | 310 °C | 590 °F | ASTM D3418 |
| 310 °C | 590 °F | ISO 11357-3 | |
| Maximum Service Temperature, Air | 164 - 185 °C | 327 - 365 °F | Continuous Use |
| Deflection Temperature at 0.46 MPa (66 psi) | 297 °C @Thickness 3.20 mm |
567 °F @Thickness 0.126 in |
Annealed; ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 277 °C | 531 °F | Annealed; Flatwise; ISO 75-2/A |
| 285 °C @Thickness 3.20 mm |
545 °F @Thickness 0.126 in |
Annealed; ASTM D648 | |
| Flammability, UL94 | HB @Thickness 3.18 mm |
HB @Thickness 0.125 in |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+16 ohm-cm | 1.00e+16 ohm-cm | ASTM D257 |
| Dielectric Constant | 4.2 @Frequency 1.00e+6 Hz |
4.2 @Frequency 1.00e+6 Hz |
ASTM D150 |
| 4.4 @Frequency 60.0 Hz |
4.4 @Frequency 60.0 Hz |
ASTM D150 | |
| Dielectric Strength | 21.0 kV/mm @Thickness 3.20 mm |
533 kV/in @Thickness 0.126 in |
ASTM D149 |
| Dissipation Factor | 0.0050 @Frequency 60.0 Hz |
0.0050 @Frequency 60.0 Hz |
ASTM D150 |
| 0.017 @Frequency 1.00e+6 Hz |
0.017 @Frequency 1.00e+6 Hz |
ASTM D150 | |
| Arc Resistance | 140 sec | 140 sec | ASTM D495 |
| Comparative Tracking Index | 550 V | 550 V | UL 746 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Processing Temperature | 79.4 °C | 175 °F | Hopper |
| Rear Barrel Temperature | 304 - 318 °C | 579 - 604 °F | |
| Front Barrel Temperature | 316 - 329 °C | 601 - 624 °F | |
| Melt Temperature | 321 - 343 °C | 610 - 649 °F | |
| Mold Temperature | 135 °C | 275 °F | |
| Drying Temperature | 120 °C @Time 14400 sec |
248 °F @Time 4.00 hour |
|
| Moisture Content | <= 0.045 % | <= 0.045 % |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Additive | Heat Stabilizer | |
| Availability | Africa & Middle East | |
| Asia Pacific | ||
| Europe | ||
| Latin America | ||
| North America | ||
| Color | Black; Natural | |
| Form | Pellets | |
| Processing Technique | Injection Molding | |
| RoHS Compliance | RoHS Compliant |
Users viewing this material also viewed the following:
- Nye Lubricants 634B (SO) Synthetic Oil
- PolyOne OnForce™ LFT NN-40LGF/000 HS Natural Polyamide 66 (Nylon 66)
- Solvay Specialty Polymers Polidan® S/I 20 Polyethylene, Crosslinked (XLPE)
- Saint-Gobain Chemfab® 5 High-Performance PTFE-Coated Glass
- Lubrizol ESTANE® 75AT3 Ether Based Thermoplastic Polyurethane
- Ter Hell Plastic Terez® PBT 7100 GF 30 Polybutylene Terephthalate, 30% Glass Fiber
- E-Polymers TEKAMID® TB110M40 , 40% Mineral Filled PA6, DAM
- Eagle Brass 102 OF COPPER (Non-Certified), Annealed
- C.O.I.M. PLAXTER® P 30 Polymeric Plasticizer
- BASF Ultramid® 8253 PA6 (Dry)
Copyright © lookpolymers.com All Rights Reserved