Solvay Specialty Polymers Amodel® AFA-6145 V0 Z Polyphthalamide (PPA) (Unverified Data**)

Category	Polymer , Thermoplastic , Polyphthalamide (PPA) , Polyphthalamide (PPA), 50% Glass Fiber Reinforced
Manufacturer
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Solvay Specialty Polymers Amodel® AFA-6145 V0 Z Polyphthalamide (PPA) (Unverified Data**).pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Amodel AFA-6145 V0 Z is a 45% glass-fiber reinforced, flame retardant grade of polyphthalamide (PPA) resin specifically formulated for connector applications requiring compatibility with both infrared and vapor phase soldering operations typically used by the electronics industry. Amodel AFA-6145 V0 Z offers high flow and short molding cycles, thereby enhancing molding productivity and lowering costs. - Black: AFA-6145 V0 Z BK 324Injection Notes: Injection Rate: 3 to 4 in/sec Adjust holding pressure to 1/2 injection pressure. Set hold time to maximize part weight. A general purpose screw is recommended, with minimum back pressure.Information provided by Solvay Specialty Polymers.

Physical Properties	Metric	English	Comments
Density	1.80 g/cc	0.0650 lb/in³	ISO 1183/A
Filler Content	45 %	45 %	Glass Fiber Reinforcement
Linear Mold Shrinkage, Flow	0.0020 cm/cm	0.0020 in/in	ASTM D955
Linear Mold Shrinkage, Transverse	0.0040 cm/cm	0.0040 in/in	ASTM D955

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	193 MPa	28000 psi	ASTM D638
Elongation at Break	1.5 %	1.5 %	ASTM D638
Flexural Strength	276 MPa	40000 psi	ASTM D790
Flexural Modulus	15.5 GPa	2250 ksi	ASTM D790
Izod Impact, Notched	1.10 J/cm	2.06 ft-lb/in	ASTM D256

Thermal Properties	Metric	English	Comments
Melting Point	310 °C	590 °F	Peak; ASTM D3418
Deflection Temperature at 1.8 MPa (264 psi)	277 °C	531 °F	Unannealed; ASTM D648
Flammability, UL94	V-0 @Thickness 0.794 mm	V-0 @Thickness 0.0313 in	UL 94

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+15 ohm-cm	1.00e+15 ohm-cm	ASTM D257
Surface Resistance	1.00e+13 ohm	1.00e+13 ohm	ASTM D257
Dielectric Constant	4.1 @Frequency 1.00e+6 Hz	4.1 @Frequency 1.00e+6 Hz	ASTM D150
Dielectric Strength	23.0 kV/mm @Thickness 1.59 mm	584 kV/in @Thickness 0.0626 in	ASTM D149
Dissipation Factor	0.011 @Frequency 1.00e+6 Hz	0.011 @Frequency 1.00e+6 Hz	ASTM D150

Processing Properties	Metric	English
Rear Barrel Temperature	316 - 324 °C	601 - 615 °F
Front Barrel Temperature	327 - 332 °C	621 - 630 °F
Melt Temperature	321 - 338 °C	610 - 640 °F
Mold Temperature	65.6 - 93.3 °C	150 - 200 °F
Drying Temperature	120 °C	248 °F
Dry Time	4.00 hour	4.00 hour
Moisture Content	0.045 %	0.045 %

Descriptive Properties	Value	Comments
Additive	Flame Retardant
Appearance	Black
Automotive Specifications	ASTM D6779 PA104G45
Availability	Africa & Middle East
	Asia Pacific
	Europe
	North America
	South America
Features	Flame Retardant
	Good Chemical Resistance
	Good Dimensional Stability
	Good Electrical Properties
	Good Stiffness
	High Flow
	High Strength
	Hot Water Moldability
Forms	Pellets
Generic	PPA
Injection Rate	Fast
Processing Method	Water-Heated Mold Injection Molding
RoHS Compliance	RoHS Compliant
Uses	Automotive Applications
	Automotive Electronics
	Automotive Under the Hood
	Cell Phones
	Connectors
	Housings
	Industrial Applications
	Industrial Parts

Users viewing this material also viewed the following: