- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyester, TP
- Polyethylene Terephthalate (PET)
- Polyethylene Terephthalate (PET), 40% Glass Reinforced
- Shinkong Synthetic Fibers Shinite® T101G36 PET, 36% Glass Filled
Shinkong Synthetic Fibers Shinite® T101G36 PET, 36% Glass Filled
| Category | Polymer , Thermoplastic , Polyester, TP , Polyethylene Terephthalate (PET) , Polyethylene Terephthalate (PET), 40% Glass Reinforced |
| Manufacturer | Shinkong Synthetic Fibers Corp |
| Trade Name | Shinite® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Shinkong Synthetic Fibers Shinite® T101G36 PET, 36% Glass Filled.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information from Shinkong Synthetic Fibers Corp.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.63 g/cc | 1.63 g/cc | ASTM D792 |
| Water Absorption | 0.15 % | 0.15 % | ASTM D570 |
| Linear Mold Shrinkage, Flow | 0.0010 - 0.0030 cm/cm | 0.0010 - 0.0030 in/in | ASTM D955 |
| Linear Mold Shrinkage, Transverse | 0.0050 - 0.0080 cm/cm | 0.0050 - 0.0080 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength | 137 MPa | 19900 psi | ASTM D638 |
| Elongation at Break | 3.6 % | 3.6 % | ASTM D638 |
| Flexural Yield Strength | 216 MPa | 31300 psi | ASTM D790 |
| Flexural Modulus | 9.81 GPa | 1420 ksi | ASTM D790 |
| Izod Impact, Notched | 0.932 J/cm @Thickness 3.17 mm, Temperature 23.0 °C |
1.74 ft-lb/in @Thickness 0.125 in, Temperature 73.4 °F |
ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 1.8 MPa (264 psi) | 220 °C | 428 °F | ASTM D648 |
| Flammability, UL94 | HB | HB |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+16 ohm-cm | 1.00e+16 ohm-cm | ASTM D257 |
| Dielectric Constant | 4.0 | 4.0 | ASTM D150 |
| Dielectric Strength | 20.0 kV/mm | 508 kV/in | ASTM D149 |
Users viewing this material also viewed the following:
- Nilit FRIANYL A63 CV-CM 0830 9005/Z Powder-coatable nylon 6.6 for injection molding, 8% carbon fiber reinforced, 30% ceramic filled
- Solvay Specialty Polymers Galden® SV135 PFPE Solvent
- SABIC Innovative Plastics LNP THERMOCOMP DX10313 PC (Asia Pacific)
- Master Bond EP37-3FLF Low Exotherm Highly Flexible Two Component Epoxy
- ExxonMobil Mobil Zerice 100 S Oil
- Clariant Renol PA211G40 Nylon 6, 40% Glass Fiber, Lubricated
- ExxonMobil Mobil Rarus 1025 SHC 1000 Series
- Ashley Polymers Ashlene® R528LW Nylon 66
- Cheng Yu Plastic IPS600 Flame Retardant HIPS
Copyright © lookpolymers.com All Rights Reserved