POLYMER SEARCH

SABIC Innovative Plastics ULTEM CRS5011 PEI

Category	Polymer , Thermoplastic , Polyetherimide (PEI)
Manufacturer	SABIC Innovative Plastics (GE Plastics)
Trade Name	ULTEM
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	SABIC Innovative Plastics ULTEM CRS5011 PEI.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Transparent, Enhanced flow Polyetherimide copolymer (Tg 225C) with enhanced chemical resistance to strong acids, bases, aromatics, and ketones. ECO conforming, UL94 V0 listing.

Physical Properties	Metric	English	Comments
Specific Gravity	1.28 g/cc	1.28 g/cc	ASTM D792
Linear Mold Shrinkage, Flow	0.0040 - 0.0070 cm/cm @Thickness 3.20 mm	0.0040 - 0.0070 in/in @Thickness 0.126 in	SABIC Method
Melt Flow	11 g/10 min @Load 6.60 kg, Temperature 337 Â°C	11 g/10 min @Load 14.6 lb, Temperature 639 Â°F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	99.0 MPa	14400 psi	Type I, 5 mm/min; ASTM D638
Elongation at Break	60 %	60 %	Type I, 5 mm/min; ASTM D638
Tensile Modulus	2.89 GPa	419 ksi	5 mm/min; ASTM D638
Flexural Yield Strength	137 MPa	19900 psi	2.6 mm/min, 100 mm span; ASTM D790
Flexural Modulus	3.10 GPa	450 ksi	2.6 mm/min, 100 mm span; ASTM D790
Izod Impact, Notched	0.580 J/cm	1.09 ft-lb/in	ASTM D256
	20.82 J/cm @Thickness 3.20 mm	39.00 ft-lb/in @Thickness 0.126 in	ASTM D256

Thermal Properties	Metric	English	Comments
Deflection Temperature at 1.8 MPa (264 psi)	204 Â°C @Thickness 6.40 mm	399 Â°F @Thickness 0.252 in	unannealed; ASTM D648
Glass Transition Temp, Tg	225 Â°C	437 Â°F
UL RTI, Electrical	160 Â°C	320 Â°F	UL 746B
UL RTI, Mechanical with Impact	155 Â°C	311 Â°F	UL 746B
UL RTI, Mechanical without Impact	160 Â°C	320 Â°F	UL 746B
Flammability, UL94	V-0 @Thickness 1.47 mm	V-0 @Thickness 0.0579 in	UL 94

Optical Properties	Metric	English	Comments
Transmission, Visible	90 %	90 %	transparent; thickness not quantified

Electrical Properties	Metric	English	Comments
Dielectric Constant	3.2 @Frequency 50.0 - 60.0 Hz	3.2 @Frequency 50.0 - 60.0 Hz	ASTM D150
Dielectric Strength	17.9 kV/mm @Thickness 3.20 mm	455 kV/in @Thickness 0.126 in	in oil; ASTM D149
Dissipation Factor	0.0021 @Frequency 50.0 - 60.0 Hz	0.0021 @Frequency 50.0 - 60.0 Hz	ASTM D150
Arc Resistance	120 - 180 sec	120 - 180 sec	Tungsten; ASTM D495
Comparative Tracking Index	100 - 175 V	100 - 175 V	UL 746A
Hot Wire Ignition, HWI	>= 120 sec	>= 120 sec	UL 746A
High Amp Arc Ignition, HAI	>= 120 arcs	>= 120 arcs	UL 746A
High Voltage Arc-Tracking Rate, HVTR	25.4 - 80.0 mm/min	1.00 - 3.15 in/min	UL 746A

Users viewing this material also viewed the following: