SABIC Innovative Plastics LNP LUBRICOMP NL001 PC+ABS (Europe-Africa-Middle East)

Category	Polymer , Thermoplastic , ABS Polymer , Polycarbonate/ABS Alloy, Unreinforced , Polycarbonate (PC)
Manufacturer	SABIC Innovative Plastics (GE Plastics)
Trade Name	LNP LUBRICOMP
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	SABIC Innovative Plastics LNP LUBRICOMP NL001 PC+ABS (Europe-Africa-Middle East).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

LNP LUBRICOMP* NL001 is a wear resistant PC+ABS blend, suitable for thin wall applications.

Physical Properties	Metric	English	Comments
Specific Gravity	1.14 g/cc	1.14 g/cc	ASTM D792
Density	1.10 g/cc	0.0397 lb/inÂ³	ISO 1183
Linear Mold Shrinkage, Flow	0.0050 - 0.0070 cm/cm	0.0050 - 0.0070 in/in	on Tensile Bar; SABIC Method
Melt Index of Compound	26 g/10 min @Load 5.00 kg, Temperature 260 Â°C	26 g/10 min @Load 11.0 lb, Temperature 500 Â°F	MVR [cm^3/10 min]; ISO 1133

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	40.0 MPa	5800 psi	5 mm/min; ISO 527
	40.0 MPa	5800 psi	50 mm/min; ISO 527
	43.0 MPa	6240 psi	Type I, 50 mm/min; ASTM D638
Tensile Strength, Yield	45.0 MPa	6530 psi	5 mm/min; ISO 527
	50.0 MPa	7250 psi	50 mm/min; ISO 527
	53.0 MPa	7690 psi	Type I, 50 mm/min; ASTM D638
Elongation at Break	20 %	20 %	50 mm/min; ISO 527
	24.3 %	24.3 %	Type I, 50 mm/min; ASTM D638
	45 %	45 %	5 mm/min; ISO 527
Elongation at Yield	3.6 %	3.6 %	Type I, 50 mm/min; ASTM D638
	4.0 %	4.0 %	5 mm/min; ISO 527
	4.0 %	4.0 %	50 mm/min; ISO 527
Tensile Modulus	2.30 GPa	334 ksi	1 mm/min; ISO 527
	2.40 GPa	348 ksi	50 mm/min; ASTM D638
Flexural Yield Strength	80.0 MPa	11600 psi	2 mm/min; ISO 178
	86.0 MPa	12500 psi	1.3 mm/min, 50 mm span; ASTM D790
Flexural Modulus	2.44 GPa	354 ksi	1.3 mm/min, 50 mm span; ASTM D790
	2.50 GPa	363 ksi	2 mm/min; ISO 178
Izod Impact, Notched (ISO)	10.0 kJ/mÂ²	4.76 ft-lb/inÂ²	80104; ISO 180/1A
	8.00 kJ/mÂ² @Temperature -30.0 Â°C	3.81 ft-lb/inÂ² @Temperature -22.0 Â°F	80104; ISO 180/1A
Charpy Impact, Notched	1.30 J/cmÂ²	6.19 ft-lb/inÂ²	Edgew 80104 sp=62mm; ISO 179/1eA
	1.00 J/cmÂ² @Temperature -30.0 Â°C	4.76 ft-lb/inÂ² @Temperature -22.0 Â°F	Edgew 80104 sp=62mm; ISO 179/1eA

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	70.0 Âµm/m-Â°C @Temperature 23.0 - 80.0 Â°C	38.9 Âµin/in-Â°F @Temperature 73.4 - 176 Â°F	ISO 11359-2
CTE, linear, Transverse to Flow	87.0 Âµm/m-Â°C @Temperature 23.0 - 80.0 Â°C	48.3 Âµin/in-Â°F @Temperature 73.4 - 176 Â°F	ISO 11359-2
Hot Ball Pressure Test	<= 100 Â°C	<= 212 Â°F	IEC 60695-10-2
Deflection Temperature at 0.46 MPa (66 psi)	114 Â°C	237 Â°F	Flatw 80104 sp=64mm; ISO 75/Bf
	116 Â°C @Thickness 3.20 mm	241 Â°F @Thickness 0.126 in	unannealed; ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	95.0 Â°C	203 Â°F	Edgew 120104 sp=100mm; ISO 75/Ae
	99.0 Â°C @Thickness 3.20 mm	210 Â°F @Thickness 0.126 in	unannealed; ASTM D648
Vicat Softening Point	113 Â°C	235 Â°F	Rate B/50; ISO 306
	115 Â°C	239 Â°F	Rate B/120; ISO 306
Flammability, UL94	HB @Thickness 1.60 mm	HB @Thickness 0.0630 in	UL 94 by SABIC-IP
	HB @Thickness 3.00 mm	HB @Thickness 0.118 in	UL 94 by SABIC-IP
Oxygen Index	21 %	21 %	ISO 4589

Electrical Properties	Metric	English	Comments
Volume Resistivity	>= 1.00e+15 ohm-cm	>= 1.00e+15 ohm-cm	IEC 60093
Surface Resistance	>= 1.00e+15 ohm	>= 1.00e+15 ohm	ROA; IEC 60093

Descriptive Properties	Value	Comments
Ball Pressure Test, 75Â°C +/- 2Â°C	PASSES	IEC 60695-10-2

Users viewing this material also viewed the following: